Phase Heck reaction

Other Uses of Solid-Phase Heck Reactions... 

Procter and coworkers have apphed a microwave-assisted Heck reaction as an intermediate step in the construction of tetrahydroquinolones on sohd phase (Scheme 52) [137]. Optimization of the reaction conditions showed DMF to be the optimal solvent for the sohd phase Heck reaction, and a small hbrary of tetrahydroquinolones was prepared using this approach. Additional studies showed that intermediates of the type 66 could be cyclatively cleaved with Sml2 in one step if the sulfur hnker was replaced by a sulfoxide group (i.e., the HASC hnker). 

Seddon s group described the option of carrying out Heck reactions in ionic liquids that do not completely mix with water. These authors studied different Heck reactions in the triphasic [BMIM][PFg]/water/hexane system [91]. While the [BMIM]2[PdCl4] catalyst used remains in the ionic liquid, the products dissolve in the organic layer, with the salt formed as a by-product of the reaction ([H-base]X) being extracted into the aqueous phase. 

Heck reactions can be carried out in the absence of phosphine ligands.141 These conditions usually involve Pd(OAc)2 as a catalyst, along with a base and a phase transfer salt such as tetra-n-butylammonium bromide. These conditions were originally applied to stereospecific coupling of vinyl iodides with ethyl acrylate and methyl vinyl ketone. 

In aqueous DMF, the reaction can be applied to the formation of C-C bonds in a solid-phase synthesis with resin-bound iodobenzoates (Eq. 6.33).80 The reaction proceeds smoothly and leads to moderate to high yield of product under mild conditions. The optimal conditions involve the use of 9 1 mixture of DMF-water. Parsons investigated the viability of the aqueous Heck reactions under superheated conditions.81 A series of aromatic halides were coupled with styrenes under these conditions. The reaction proceeded to approximately the same degree at 400°C as at 260°C. Some 1,2-substituted alkanes can be used as alkene equivalents for the high-temperature Heck-type reaction in water.82... 

Grigg and coworkers developed bimetallic domino reactions such as the electro-chemically driven Pd/Cr Nozaki-Hiyama-Kishi reaction [69], the Pd/In Barbier-type allylation [70], Heck/Tsuji-Trost reaction/1,3 dipolar cycloaddition [71], the Heck reaction/metathesis [72], and several other processes [73-75]. A first example for an anion capture approach, which was performed on solid phase, is the reaction of 6/1-134 and 6/1-135 in the presence of CO and piperidine to give 6/1-136. Liberation from solid phase was achieved with HF, leading to 6/1-137 (Scheme 6/1.30) [76]. 

Yamazaki, Kondo and coworkers [78] reported on a combination of a Heck reaction and an animation on solid phase for the synthesis of indole carboxylate 6/1-148, employing an acetylated immobilized enamide 6/1-145 and a bifunctionalized... 

Metal-catalyzed cross-couplings are key transformations for carbon-carbon bond formation. The applicability of continuous-flow systems to this important reaction type has been shown by a Heck reaction carried out in a stainless steel microreactor system (Snyder et al. 2005). A solution of phenyliodide 5 and ethyl acrylate 6 was passed through a solid-phase cartridge reactor loaded with 10% palladium on charcoal (Scheme 2). The process was conducted with a residence time of 30 min at 130°C, giving the desired ethyl cinnamate 7 in 95% isolated yield. The batch process resulted in 100% conversion after 30 min at 140°C using a preconditioned catalyst. 

Herrmann WA, Brossmer C, Reisinger CP, Riermaier T, Ofele K, Beller M (1997) Coordination chemistry and mechanisms of metal-catalyzed C-C coupling reactions. Part 10. Palladacycles efficient new catalysts for the Heck vinylation of aryl halides. Chem Eur J 3 1357-1364 Iyer S, Jayanthi A (2001) Acetylferrocenyloxime palladacycle-catalyzed Heck reactions. Tetrahedron Lett 42 7877-7878 Iyer S, Ramesh C (2000) Aryl-Pd covalently bonded palladacycles, novel amino and oxime catalysts di- x-chlorobis(benzaldehydeoxime-6-C,AT)dipalla-dium(II), di- x-chlorobis(dimethylbenzylamine-6-C,A)dipalladium(II) for the Heck reaction. Tetrahedron Lett 41 8981-8984 Jeffery T (1984) Palladium-catalysed vinylation of organic halides under solid-liquid phase transfer conditions. J Chem Soc Chem Commun 1287-1289 (b) idem,... 

Similar to the Pd-catalyzed pyrrole and thiophene annulations, an intramolecular Heck reaction of substrate 91 resulted in benzofuran 92 [80], Such an approach has become a popular means of synthesizing fused furans. Muratake et al. exploited the intramolecular Heck cyclization to establish the tricyclic core structure en route to the synthesis of a furan analog of duocarmycin SA, a potent cytotoxic antibiotic [81]. Under Jeffery s phase-transfer catalysis conditions, substrate 93 was converted to tricyclic derivatives 94 and 95 as an inseparable mixture (ca. 4 1) of two double bond isomers. 

Haloarene chromium tricarbonyl complexes are activated to nucleophilic attack by thiolate anions [58, 59]. High yields of the thioethers are obtained under liquiddiquid two-phase conditions, but optimum yields are achieved under soliddiquid conditions. In many cases the thioether is produced directly but, where the reaction mixture contains thioether and its chromium complex, the thioether can be isolated by degradation of the complex with iodine or an excess of the thiol. Both 1,2- and 1,4-dichlorobenzenes yield only monothioethers, even when an excess of thiolate anion is used. In contrast, 1,3-dichlorobenzenes produce a mixture of the mono- and dithioethers [59]. Aryl allyl thioethers have been produced under catalysed Heck reaction conditions from S-allyl thiocarbamates and iodobenzene [60]. 

Palladium-catalysed C-C bond formation under Heck reaction conditions, which normally requires anhydrous conditions and the presence of copper(I) salts, is aided by the addition of quaternary ammonium salts. It has been shown that it is frequently possible to dispense with the copper catalyst and use standard two-phase reactions conditions [e.g. 18, 19]. Tetra-/i-butylammonium salts catalyse the palladium-catalysed reaction of iodoarenes with alkynes to yield the arylethynes in high yield [20, 21], whereas the reaction with 3-methylbut-1 -yn-3-ol (Scheme 6.30) provides a route to diarylethynes [22]. Diarylethynes are also formed from the reaction of an iodoarene with trimethylsilylethyne [23], Iodoalkynes react with a,p-unsaturated ketones and esters to produce the conjugated yne-eneones [19],... 

Analogously, over the years, Arai and co-workers have investigated silica-supported ethylene glycol as a catalyst-philic phase, which contained a metal precursor, for C-C bond-forming reactions, such as the Heck reaction. They describe a multiphasic system with an organic phase (solvent) that contains only reactants and products without any catalyst. The products could be recovered by simple filtration, and the catalyst recycled many times without deactivation, since it did not precipitate, thus making the catalytic system stable and reusable (Figure 6.7). °... 

In this section we describe two approaches for using dendrimer-encapsulated metal particles to perform biphasic catalysis. The first is hydrogenation catalysis using dendrimers rendered soluble in the fluorous phase by electrostatic attachment of perfluoroether groups [103]. The second demonstrates the use of perfluoroether groups covalently hnked to the dendrimer exterior to carry out a Heck reaction [100]. 

C-C bond formation using the Heck reaction allows the introduction of functional groups to obtain new organic structures on solid supports. This reaction between an alkene with an alkenyl or an aryl halide has been widely employed in various in-tra- and inter-molecular versions on solid-phase because of the readily accessibility of starting materials. The Heck reaction was performed on immobilized aryl or alkenyl halides with soluble alkenes and vice versa (Scheme 3.11). 

Scheme 3.11 Heck reactions in solid-phase synthesis [240].

Running a Heck reaction in an aqueous phase may substantially change the selectivity of the process as demonstrated by the cyclization ofiodo- and... 

F.3. Two-Phase Allylic Aminations and Heck Reactions using Thermomorphic Dendritic Catalysts... 

The choice of an ionic liquid was shown to be critical in experiments with [NBuJBr (TBAB, m.p. 110°C) as a catalyst carrier to isolate a cyclometallated complex homogeneous catalyst, tra .s-di(ri-acetato)-bis[o-(di-o-tolylphosphino) benzyl] dipalladium (II) (Scheme 26), which was used for the Heck reaction of styrene with aryl bromides and electron-deficient aryl chlorides. The [NBu4]Br displayed excellent stability for the reaction. The recycling of 1 mol% of palladium in [NBu4]Br after the reaction of bromobenzene with styrene was achieved by distillation of the reactants and products from the solvent and catalyst in vacuo. Sodium bromide, a stoichiometric salt byproduct, was left in the solvent-catalyst system. High catalytic activity was maintained even after the formation of visible palladium black after a fourth run and after the catalyst phase had turned more viscous after the sixth run. The decomposition of the catalyst and the formation of palladium... 

A number of modified reaction conditions have been developed. One involves addition of silver salts, which activate the halide toward displacement.94 Use of sodium bicarbonate or sodium carbonate in the presence of a phase-transfer catalyst permits especially mild conditions to be used for many systems.95 Tetraalkylammonium salts often accelerate reaction.96 Solid-phase catalysts in which the palladium is complexed by polymer-bound phosphine groups have also been developed.97 Aryl chlorides are not very reactive under normal Heck reaction conditions, but reaction can be achieved by inclusion of triphenylphosphonium salts with Pd(OAc)2 or PdCl2 as the catalyst.98... 

---