Pharmaceuticals process validation studies with

Process validation is the procedure that allows one to establish the critical operating parameters of a manufacturing process. Hence, the constraints imposed by the FDA as part of process control and validation of an SMB process. The total industrial SMB system, as described, is a continuous closed-loop chromatographic process, from the chromatographic to recycling unit and, with the use of numerical simulation software allows the pharmaceutical manufacturer rapidly to design and develop worst-case studies. 

If the product is to be used for pharmaceuticals the GMP rules must be obeyed during plant operation. All chemicals to be tested in clinical studies with humans must be prepared according to GMP. This leads to very detailed documentation since if you haven t documented it, you haven t done it . All procedures for manufacturing and changes in procedures are subject to approval by quality control departments. This decreases the flexibility in process development. Products that are contaminated too much must be reprocessed according to the GMP guidelines. All equipment to be used in the pilot plant must be validated before use. 

The concept of validation came up in the 1970s in association with sterilization procedures and was extended to all steps of pharmaceutical manufacturing procedures. Validation means proving that any and all procedures, processes, equipment, material, operations, and systems comply with the expected performance. Well-planned and well-conducted validation studies constitute GMP principles once they guarantee a consistently safe and efficacious final product. Validation is important for companies, first for QA, and also for cost reduction, decreasing failures, rejection, reworks, recalls, and complaints. The positive aspect of validation is an increase in productivity, as a consequence of a well-controlled process. Validation is required by the regulatory agencies of many countries. 

A fundamental objective of a computer system applied to automate a pharmaceutical GMP operation is to ensure the quality attributes of the drug product are upheld throughout the manufacturing process. It is therefore important that quality-critical parameters are determined and approved early in the validation life cycle. The exercise should be undertaken to a written procedure with base information from the master product/production record file examined and quality-critical parameter values and limits documented and approved for the process and its operation. In addition, the process and instrument diagrams (P IDs) should be reviewed to confirm the measurement and control components that have a direct impact on the quality-critical parameters and data. This exercise should be carried out by an assessment team made up of user representatives with detailed knowledge of both the computer system application and process, and with responsibility for product quality, system operational use, maintenance, and project implementation. This exercise may be conducted as part of an initial hazard and operability study (HAZOP) and needs to confirm the quality-related critical parameters for use in (or referenced by) the computer control system URS. 

This case study embraces the design and validation of both standard and intelligent instrament applications, and briefly discusses special instrament systems (shutdown systems and analyzer packages). The number of instruments that can be involved with the dynamic operation of a pharmaceutical manufacturing process can be large (2000 to 3000 items). In most cases, they are... 

---