Pharmaceutical plants application required

Perhaps a major factor is the handling of batches. For instance, pharmaceutical plants usually handle fixed sizes for which integrity must be maintained (no mix-ing/splitting), while solvent or polymer plants handle variable sizes that can be split and mixed. Similarly, different requirements on processing times can be found in different industries depending on process characteristics. For example pharmaceutical applications might involve fixed times due to FDA regulations, while solvents or polymers have times that can be adjusted and optimized with process models. 

Municipal water plants provide limited treatment, mostly intended to make the water safe to drink. A lot of contaminants, such as salts, dissolved gases, and organic materials contained in natural sources, remain in the municipal water supply. In addition, chlorine or other disinfectants are often added as part of the treatment process to control microbial contamination. For many critical applications required in pharmaceutical plants, such water quality is not sufficient, and further treatment is necessary. 

The precious metals are many times the cost of the base metals and, therefore, are limited to specialized applications or to those in which process conditions are highly demanding (e.g., where conditions are too corrosive for base metals and temperatures too high for plastics where base metal contamination must be avoided, as in the food and pharmaceutical industries or where plastics cannot be used because of heat transfer requirements and for special applications such as bursting discs in pressure vessels). The physical and mechanical properties of precious metals and their alloys used in process plants are given in Table 3.38. 

Analysis of small ions has been published for many applications other than pharmaceutical applications, and has a growing impact in industrial, environmental, biomedical, clinical, and forensic laboratories. Sample matrices range from simple tap water to Kraft black liquor, including river and seawater, beer and wine, environmental water, and nuclear plant water, but also body fluids such as serum, urine, plasma, cerebrospinal fluid, and many others. Those topics alone would require a separate book. 

As is the case with other biotechnological products, the extent of protein purification depends on the final intended application of the product. There are applications where the plant tissue can be directly used, and hence purification is not needed. In other situations particularly pharmaceutical products administered parenterally, there are stringent purity requirements, necessitating complete removal of viral particles, endotoxins and other contaminants. There are very few published reports that make quantitative and characterize the extraction and purification of proteins from transgenic plants. Furthermore, there are practically none dealing with the economics of their downstream processing. 

Plants and plant extracts have been used as medicine, culinary spice, dye and general cosmetic since ancient times. Plant extracts are seen as a way of meeting the demanding requirements of the modem industry. In the past two decades, much attention has been directed to the use of near critical and supercritical carbon dioxide solvent, particularly in the food pharmaceutical and perfume industries. CO2 is an ideal solvent because it is non-toxic, non-explosive, readily available and easily removed from the extracted products. At present the major industrial-scale applications of supercritical fluid extraction (SFE) are hop extraction, decaffeination of coffee and tea, and isolation of flavours, fragrances and other components from spices, herbs and medicinal plants [1-4]. 

Like many other specialities, electrodialysis plants are purchased as complete packages from a few available suppliers. Membrane replacement is about 10% per year. Even with prefiltering the feed, cleaning of membranes may be required at intervals of a few months. The comparative economics of electrodialysis for desalting brackish waters is discussed by Belfort (1984) for lower salinities, elecfrodialysis and reverse osmosis are competitive, but for higher ones elecfrodialysis is inferior. Elecfrodialysis has a number of important unique applications, for removal of high contents of minerals from foods and pharmaceuticals, for recovery of radioactive and other substances from dilute solutions, in electro-oxidation reduction processes and others. 

---