Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Diols peroxides

In a 500 ml. three-necked flask, equipped with a mechanical stirrer, thermometer and dropping funnel, place 300 ml. of 88-90 per cent, formic acid and add 70 ml. of 30 per cent, hydrogen peroxide. Then introduce slowly 41 g. (51 ml.) of freshly distilled cyclohexene (Section 111,12) over a period of 20-30 minutes maintain the temperature of the reaction mixture between 40° and 45° by cooling with an ice bath and controlling the rate of addition. Keep the reaction mixture at 40° for 1 hour after all the cyclohexene has been added and then allow to stand overnight at room temperature. Remove most of the formic acid and water by distillation from a water bath under reduced pressure. Add an ice-cold solution of 40 g. of sodium hydroxide in 75 ml. of water in small portions to the residual mixture of the diol and its formate take care that the tempera... [Pg.894]

Nucleophilic opening of oxiranes to give ultimately 1,2-diols is usually effected without isolation of the oxirane oxiranation (epoxidation) of alkenes with unbuffered peroxy-ethanoic acid or hydrogen peroxide in methanoic acid (Section 5.05.4.2.2(/)) tends to give monoesters of 1,2-diols (e.g. 53), which can be hydrolyzed to the diols (Scheme 46). [Pg.110]

Hydroxylalion erf a double bond to a 1,2-diol wKh hydrogen peroxide arxl OSO4 as catalysL... [Pg.263]

DMSO, molybdenum peroxide, benzene, reflux, 7-20 h, 60% yield. This method was used to m onoprotect 1,2-diols. The method is not general because oxidation to a-hydroxy ketones and diketones occurs with some substrates. On the basis of the mechanism and the results it would app>ear that overoxidation has a strong conformational dependence. [Pg.21]

Hydroxycortisone BMD) (48) A solution of 4 g of 17a,20 20,21-bis-methylenedioxypregn-4-ene-3,l 1-dione (cortisone BMD) (46) dissolved in 300 ml of t-butanol and 5 ml of water is treated with 34 ml of 35 % hydrogen peroxide and 0.45 g of osmium tetroxide predissolved in 36 ml of /-butanol. The resulting mixture is allowed to stand at room temperature for 2 days. Diol (47) which crystallizes during the reaction is collected by filtration and washed with /-butanol and water. The filtrate is diluted with ethyl acetate and washed sequentially with aqueous sodium chloride, aqueous 10% sodium bisulfite, aqueous 10% sodium bicarbonate and finally with water to neutrality. The solvent is evaporated and a second crop of the diol (47) is collected, providing a total of about 3.8 g. [Pg.423]

Acetylenedimagnesium bromide, 66, 84, 137 Acyl-alkyl diradical disproportionations, 299 Acyl-alkyl diradical recombination, 296 Alkaline hydrogen peroxide, 10, 12, 20 Alkylation of formyl ketones, 93 Alkylation via enolate anions, 86 17a-Alkynyl steroids from 17-ketones, 67 2a-Al]yl-17jS-hydroxy-5a-androstan-3 -one, 9 5 Allylic acetoxylation, 242 Allylmagnesium bromide, 64 17 -Aminoandrost-5-en-3 -ol, 145 17 a-Aminomethy 1-5 a-androstane-3, 1718-diol, 387... [Pg.456]

Hydroxylation of the double bond of methyltestosterone by means of osmium tetroxide and hydrogen peroxide affords the 4,5 diol. This undergoes beta elimination on treatment with base to yield oxymestrone (83). ... [Pg.173]

The bishydroxylation of peripheral C —C double bonds of porphyrins, e.g. 6, with hydrogen peroxide under acidic conditions or with osmium(VlII) oxide yields the corresponding diols, e.g. 10, which on pinacol rearrangement are transformed into geminally dialkylated chlorins, e.g. 11.9,97... [Pg.602]

The use of molybdenum catalysts in combination with hydrogen peroxide is not so common. Nevertheless, there are a number of systems in which molybdates have been employed for the activation of hydrogen peroxide. A catalytic amount of sodium molybdate in combination with monodentate ligands (e.g., hexaalkyl phosphorus triamides or pyridine-N-oxides), and sulfuric acid allowed the epoxidation of simple linear or cyclic olefins [46]. The selectivity obtained by this method was quite low, and significant amounts of diol were formed, even though highly concentrated hydrogen peroxide (>70%) was employed. [Pg.196]

Depending on the choice of transfer agent, mono- or di-cnd-functional polymers may be produced. Addition-fragmentation transfer agents such as functional allyl sulfides (Scheme 7.16), benzyl ethers and macromonomers have application in this context (Section 6.2.3).212 216 The synthesis of PEG-block copolymers by making use of PEO functional allyl peroxides (and other transfer agents has been described by Businelli et al. Boutevin et al. have described the telomerization of unsaturated alcohols with mercaptoethanol or dithiols to produce telechelic diols in high yield. [Pg.377]

The multifunctional initiators may be di- and tri-, azo- or peroxy-compounds of defined structure (c.g. 20256) or they may be polymeric azo- or peroxy-compounds where the radical generating functions may be present as side chains 57 or as part of the polymer backbone."58"261 Thus, amphiphilic block copolymers were synthesized using the polymeric initiator 21 formed from the reaction between an a,to-diol and AIBN (Scheme 7.22).26 Some further examples of multifunctional initiators were mentioned in Section 3.3.3.2. It is also possible to produce less well-defined multifunctional initiators containing peroxide functionality from a polymer substrate by autoxidalion or by ozonolysis.-0... [Pg.386]

When 3-thiolene dioxide is treated with hydrogen peroxide, the corresponding epoxide is obtained313. The 3,4-trans-diols can be obtained by hydrolysis under acidic conditions (equation 120). [Pg.464]

The preparation of Pans-1,2-cyclohexanediol by oxidation of cyclohexene with peroxyformic acid and subsequent hydrolysis of the diol monoformate has been described, and other methods for the preparation of both cis- and trans-l,2-cyclohexanediols were cited. Subsequently the trans diol has been prepared by oxidation of cyclohexene with various peroxy acids, with hydrogen peroxide and selenium dioxide, and with iodine and silver acetate by the Prevost reaction. Alternative methods for preparing the trans isomer are hydroboration of various enol derivatives of cyclohexanone and reduction of Pans-2-cyclohexen-l-ol epoxide with lithium aluminum hydride. cis-1,2-Cyclohexanediol has been prepared by cis hydroxylation of cyclohexene with various reagents or catalysts derived from osmium tetroxide, by solvolysis of Pans-2-halocyclohexanol esters in a manner similar to the Woodward-Prevost reaction, by reduction of cis-2-cyclohexen-l-ol epoxide with lithium aluminum hydride, and by oxymercuration of 2-cyclohexen-l-ol with mercury(II) trifluoro-acetate in the presence of ehloral and subsequent reduction. ... [Pg.88]

In addition, also nonheme iron catalysts containing BPMEN 1 and TPA 2 as ligands are known to activate hydrogen peroxide for the epoxidation of olefins (Scheme 1) [20-26]. More recently, especially Que and coworkers were able to improve the catalyst productivity to nearly quantitative conversion of the alkene by using an acetonitrile/acetic acid solution [27-29]. The carboxylic acid is required to increase the efficiency of the reaction and the epoxide/diol product ratio. The competitive dihydroxylation reaction suggested the participation of different active species in these oxidations (Scheme 2). [Pg.85]

Heteropoly acids can be synergistically combined with phase-transfer catalysis in the so-called Ishii-Venturello chemistry for oxidation reactions such as oxidation of alcohols, allyl alcohols, alkenes, alkynes, P-unsaturated acids, vic-diols, phenol, and amines with hydrogen peroxide (Mizuno et al., 1994). Recent examples include the epoxidations of alkyl undecylenates (Yadav and Satoskar, 1997) and. styrene (Yadav and Pujari, 2000). [Pg.138]

There has been a DFT (BLYP/6-31G ) study of the TS and its relationship to the enantioselectivity of the reaction.59 The strategy used was to build up the model by successively adding components. First the titanium coordination sphere, including an alkene and peroxide group, was modeled (Figure 12.4a). In Figure 12.4b, the diol... [Pg.1083]


See other pages where Diols peroxides is mentioned: [Pg.545]    [Pg.72]    [Pg.179]    [Pg.49]    [Pg.150]    [Pg.166]    [Pg.423]    [Pg.432]    [Pg.190]    [Pg.76]    [Pg.620]    [Pg.638]    [Pg.197]    [Pg.211]    [Pg.215]    [Pg.216]    [Pg.218]    [Pg.219]    [Pg.124]    [Pg.122]    [Pg.158]    [Pg.857]    [Pg.103]    [Pg.90]    [Pg.92]    [Pg.93]    [Pg.82]   
See also in sourсe #XX -- [ Pg.31 , Pg.122 ]

See also in sourсe #XX -- [ Pg.31 , Pg.122 ]




SEARCH



Diol formation, hydrogen peroxide

© 2024 chempedia.info