Peroxides dialkyl, from hydroperoxides

In the preparation of hydroperoxides from hydrogen peroxide, dialkyl peroxides usually form as by-products from the alkylation of the hydroperoxide in the reaction mixture. The reactivity of the substrate (olefin or RX) with hydrogen peroxide is the principal restriction in the process. If elevated temperatures or strongly acidic or strongly basic conditions are required, extensive decomposition of the hydrogen peroxide and the hydroperoxide can occur. 

Synthesis. Dialkyl peroxides are prepared by the reaction of various substrates with hydrogen peroxide, hydroperoxides, or oxygen (69). They also have been obtained from reactions with other organic peroxides. For example, dialkyl peroxides have been prepared by the reaction of hydrogen peroxide and alkyl hydroperoxides with alMating agents, eg, RX and olefins (33,66,97) (eqs. 24—27). 

The a-oxygen-substituted hydroperoxides and dialkyl peroxides comprise a great variety as shown in Figure 1. When discussing peroxides derived from ketones and hydrogen peroxide, (1) is often referred to as a ketone peroxide monomer and (2) as a ketone peroxide dimer. 

The allyloxy radicals generated from hydroperoxide, dialkyl peroxide and cyclic peroxide intermediates, in accordance with Reactions 6, 9, and 10, respectively, are converted to allyl alcohol moieties, as shown in Reaction 7. The latter are particularly susceptible to reaction with hydrogen chloride. 

In most cases dialkyl peroxides arise from the alkyl hydroperoxides formed as primary products this is so in autoxidation of isochroman,333 phthalan,334 2-methyl-l,3-dioxolane,344 and tetrahydroacenaphthacene.345 Formation of dialkyl peroxides from alkyl hydroperoxides can occur under the influence of acids, and in this ionic dimerization 333,334 hydrogen peroxide is also formed ... 

Most likely singlet oxygen is also responsible for the red chemiluminescence observed in the reaction of pyrogaHol with formaldehyde and hydrogen peroxide in aqueous alkaU (152). It is also involved in chemiluminescence from the decomposition of secondary dialkyl peroxides and hydroperoxides (153), although triplet carbonyl products appear to be the emitting species (132). 

The following commercially available dialkyl peroxides are produced according to equations 24—27 di-Z fZ-butyl peroxide from hydrogen peroxide and sulfated tert-huty alcohol or isobutylene dicumyl peroxide from a-cumyl hydroperoxide and cumyl alcohol, cumyl chloride, and/or a-methylstyrene m- and -di(2-/ f2 -butylperoxyisopropyl)ben2ene [2781-00-2] from tert-huty hydroperoxide [75-91-2] and m- and -di(2-hydroxyisopropyl)ben2ene ... 

Unsymmetrical dialkyl peroxides are obtained by the reaction of alkyl hydroperoxides with a substrate, ie, R H, from which a hydrogen can be abstracted readily in the presence of certain cobalt, copper, or manganese salts (eq. 30). However, this process is not efficient since two moles of the hydroperoxide are consumed per mole of dialkyl peroxide produced. In addition, side reactions involving free radicals produce undesired by-products (44,66). 

Syimnetiical dialkyl peroxides have been prepared from alkyl hydroperoxides and lead tetraacetate. If tertiary dihydroperoxides are used, then cychc... 

Hydroxyalkyl hydroperoxides from cycHc ketones (1), where X = OH, R =, H and R, R = alkylene, apparentiy exist in solution as equihbrium mixtures of the cycHc ketone, hydrogen peroxide, and other peroxides, eg, the dihydroperoxide (1) in which X = OOH, and dialkyl peroxides (2) where X = OH and Y = OH or OOH. Due to the existence of this equihbrium, the latter two dialkyl peroxides react as mixtures of monomeric hydroperoxides in solution. 

Hydroxyalkyl hydroperoxides having at least one a-hydrogen ie, (7, X = OH, R = alkyll, R = R = H), ie, those derived from aldehydes, lose hydrogen peroxide and form dialkyl peroxides (2, X = Y = OH), especially in the presence of water ... 

Three peroxides with aromatic substituents have reported enthalpy of vaporization data, all from the same source". The enthalpies of vaporization of cumyl hydroperoxide and ferf-butyl cumyl peroxide are the same, which makes us skeptical of at least one of these values. The calculated b value for cumyl hydroperoxide is 31.5, consistent with the alkyl hydroperoxides. The calculated b value for tert-butyl cumyl peroxide is 15.4 and more than twice that for the mean of the dialkyl peroxides. The structurally related tert-butyl p-isopropylcumyl peroxide has a b value of 8.8 and so is consistent with the other disubstituted peroxides. 

An alternative method for dialkyl peroxide synthesis is the nucleophilic addition of an alkyl hydroperoxide to an alkene under acid catalysis reported by Davies and coworkers (Scheme 31, path B) ". A similar reaction is the nucleophilic addition of alkylhy-droperoxides to vinyl ethers under acid catalysis, producing perketals. Perketals can be deprotected under mild conditions (THF/water/acetic acid) and this hydroperoxide protection-deprotection sequence has been used by Dussault and Porter as a means for the resolution of racemic hydroperoxides (see also Section II.A.2) . In this respect more detailed studies were carried out with the perketals 75, which were prepared via reaction of alkyl hydroperoxides with vinyl ethers (Scheme 33). Weissermel and Lederer reported that in the presence of teri-butyl hypochlorite, a-chlorodialkyl peroxides can be formed in yields between 12% and 45% (Scheme 31, path C)". a-Alkoxydialkyl peroxides and diperoxyacetals were prepared by Rieche and coworkers via acid catalyzed reaction of one or two equivalents of alkyl hydroperoxides with acetals, ketals or aldehydes (Scheme 31, path D)" or by methylation of the corresponding a-alkoxy hydroperoxides with diazomethane (yields 11%, 27%)" . The diperoxyacetals 76 were isolated in yields ranging from 39 to 77%. 

In 1989, a method for the peroxysilylation of alkenes nsing triethylsUane and oxygen was reported by Isayama and Mnkaiyama (eqnation 25). The reaction was catalyzed by several cobalt(II)-diketonato complexes. With the best catalyst Co(modp)2 [bis(l-morpholinocarbamoyl-4,4-dunethyl-l,3-pentanedionato)cobalt(n)] prodnct yields ranged between 75 and 99%. DiaUcyl peroxides can also be obtained starting from tertiary amines 87, amides 89 or lactams via selective oxidation in the a-position of the Af-fnnctional group with tert-butyl hydroperoxide in the presence of a ruthenium catalyst as presented by Murahashi and coworkers in 1988 ° (Scheme 38). With tertiary amines 87 as substrates the yields of the dialkyl peroxide products 88 ranged between 65 and 96%, while the amides 89 depicted in Scheme 38 are converted to the corresponding peroxides 90 in yields of 87% (R = Me) and 77% (R = Ph). 

Thiophene, dioxirane oxidation, 1156 Thiourea, dialkyl peroxide synthesis, 706 1,4-Thioxane, oxidation, 805-6 Thiyl radicals, triplet oxygen domino reactions, 221-3, 224, 225, 226 THPO (1,2,3,4-tetrahydronaphthyl hydroperoxide), 331-2 Thromboxanes, from arachidonic hydroperoxides, 612... 

The alkenyl hydroperoxides and polymeric dialkyl peroxides are fairly stable at ambient temperature but decompose appreciably at the reaction temperatures studied. Thermal stabilities of the alkenyl hydroperoxides and dialkyl peroxides in the olefin solution were determined by heating the solution at 110°C. under nitrogen. The peroxide numbers were plotted vs. time to estimate the half-lives in solution. The thermal decomposition half-lives of these alkenyl hydroperoxides are compared with values from the literature for acyclic and cyclic hydroperoxides in Table IV. Secondary acyclic alkenyl hydroperoxides appear to be less... 

It is generally agreed that alkenyl hydroperoxides are primary products in the liquid-phase oxidation of olefins. Kamneva and Panfilova (8) believe the dimeric and trimeric dialkyl peroxides they obtained from the oxidation of cyclohexene at 35° to 40° to be secondary products resulting from cyclohexene hydroperoxide. But Van Sickle and co-workers (20) report that, The abstraction/addition ratio is nearly independent of temperature in oxidation of isobutylene and cycloheptene and of solvent changes in oxidations of cyclopentene, tetramethylethylene, and cyclooctene. They interpret these results to support a branching mechanism which gives rise to alkenyl hydroperoxide and polymeric dialkyl peroxide, both as primary oxidation products. This interpretation has been well accepted (7, 13). Brill s (4) and our results show that acyclic alkenyl hydroperoxides decompose extensively at temperatures above 100°C. to complicate the reaction kinetics and mechanistic interpretations. A simplified reaction scheme is outlined below. 

At Van Sickle s conditions of low temperatures and low conversions, branching routes A and B appear to be dominant since there is little alkenyl hydroperoxide decomposition. In our work above 100°C., the branching routes are supported by the nearly linear initial portions at low conversions for alkenyl hydroperoxide and polymeric dialkyl peroxide curves (see Figures 2, 3, and 4). The polymeric dialkyl peroxides formed under our reaction conditions include those formed by the branching mechanism postulated by Van Sickle (routes A and B) and those formed by the reaction of the alkenoxy and hydroxy radicals from alkenyl hydroperoxide thermal decomposition reacting further and alternately with olefin and oxygen (step C). The importance and kinetic fit of the sequential route A to C appears to increase with temperature and extent of olefin conversion owing to the extensive thermal decomposition of the alkenyl hydroperoxides above 100°C. 

The group value of 0-(0)(C) calculated from the dialkyl peroxides gives a value of —57.1 kcal. per mole for the heat of formation of tert-BuOOH, compared with the measured value (11) of —52.3 kcal. per mole. Since the calculated value is more negative, one cannot account for the difference by the otherwise reasonable assumption that the hydroperoxide decomposed a little prior to combustion. An alternative would be that group additivity did not apply to the hydroperoxides, but Benson s... 

---