PdCl2

Technically, acetaldehyde is mainly made by the oxidation of ethylene using a CuCl2/PdCl2 catalyst system.. Although some acetic acid is still prepared by the catalytic oxidation of acetaldehyde, the main process is the catalytic oxidation of paraffins, usually -butane. 

This procedure can be applied to most P2P mixes but is especially effective on the methods to follow. However, in super clean methods, such as the PdCl2 below, where lots of isosafrole is produced, the iso byproduct can interfere with crystal formation. Someone-Who-ls-Not-Strike once found that when an appreciable amount of isosafrole was formed to the detriment of MD-P2P, the oil screwed up the crystal matrix disallowing it to form. Confused, the chemist tried to rescue the uncrystallized oil from the aqueous solution by extracting out the oil to try other things. But when the solvent hit the solution, the P2P crystallized out. Go figure The... 

Strike ranked it 3 in the Top Ten from the first edition because Strike didn t think people would bite at the idea of using such an expensive catalyst as PdCl2. Street chemists are often tightassed when that is the last thing they should be when it comes to production. But this has not been the case with this procedure as Strike has happily found out. At 7.00- 9.00/g, PdCb is still pretty pricey but this has not been a deterrent as many chemists have found. Nor should it be. This procedure works so well that it would, in fact, be stupid not to do it should one happen to work in an accredited, licensed research lab. The following is what Strike first wrote about it. 

Dream setup 100 ml of DMF stirring in a flask equipped w/ a sidearm 34 g of safrole was added in 4 portions of about 8 g each. Mixed intimately. Next, 11g of p-benzoquinone was added. Stir rate was upped. Finally, 7 g of pdcl2 was added. A dry addition... 

Flasks. Flask containing B can be a bottle. A is a round bottom flask, it s better because in a bottle or a flat bottom flask, PdCl2, wich is not dissolved in methanol until it reacts, could be in the corner of flask without reacting. 

The most characteristic feature of the Pd—C bonds in these intermediates of both the stoichiometric and catalytic reactions is their reaction with nucleophiles, and Pd(0) is generated by accepting two electrons from the nucleophiles as exemplified for the first time by the reactions of 7r-allylpalladium chloride[2] or PdCl2-COD[3] complex with malonate and acetoacetate. It should be noted... 

Formation of acetaldehyde and metallic Pd by passing ethylene into an aqueous solution of PdCl2 was reported by Phillips in 1894 15] and used for the quantitative analysis of Pd(II)[16], The reaction was highlighted after the industrial process for acetaldehyde production from ethylene based on this reaetion had been developed[l,17,18]. The Wacker process (or reaction) involves the three unit reactions shown. The unique feature in the Wacker process is the invention of the in situ redox system of PdCl2-CuCl2. 

In contrast to oxidation in water, it has been found that 1-alkenes are directly oxidized with molecular oxygen in anhydrous, aprotic solvents, when a catalyst system of PdCl2(MeCN)2 and CuCl is used together with HMPA. In the absence of HMPA, no reaction takes place(100]. In the oxidation of 1-decene, the Oj uptake correlates with the amount of 2-decanone formed, and up to 0.5 mol of O2 is consumed for the production of 1 mol of the ketone. This result shows that both O atoms of molecular oxygen are incorporated into the product, and a bimetallic Pd(II) hydroperoxide coupled with a Cu salt is involved in oxidation of this type, and that the well known redox catalysis of PdXi and CuX is not always operalive[10 ]. The oxidation under anhydrous conditions is unique in terms of the regioselective formation of aldehyde 59 from X-allyl-A -methylbenzamide (58), whereas the use of aqueous DME results in the predominant formation of the methyl ketone 60. Similar results are obtained with allylic acetates and allylic carbonates[102]. The complete reversal of the regioselectivity in PdCli-catalyzed oxidation of alkenes is remarkable. 

Chlorohydrin 61 is formed by the nucleophilic addition to ethylene with PdCl2 and CuCl2[103,104]. Regioselective chlorohydroxylation of the allylic amine 62 is possible by the participation of the heteroatom to give chlorohydrin 63. Allylic sulfides behave similarly[105]. 

Oxidation of ethylene in alcohol with PdCl2 in the presence of a base gives an acetal and vinyl ether[106,107], The reaction of alkenes with alcohols mediated by PdCl2 affords acetals 64 as major products and vinyl ethers 65 as minor products. No deuterium incorporation was observed in the acetal formed from ethylene and MeOD, indicating that hydride shift takes place and the acetal is not formed by the addition of methanol to methyl vinyl etherjlOS], The reaction can be carried out catalytically using CuClj under oxygen[28]. 

The furo- and pyranobenzopyranones 114 and 115 are prepared by the reaction of 0-enolate of i(-keto lactone 113[132], The isoxazolc 117 is obtained by the oxidation of the oxime 116 of a, /3- or, d, 7-unsaturated ketones with PdCh and Na2C03 in dichloromethane[l 33], but the pyridine 118 is formed with PdCl2(Ph3P)2 and sodium phenoxide[134]. 

Furthermore, treatment of the aminopalladation product with bromine affords aziridines[176]. The aziridine 160 was obtained stereoselectively from methylamine and 1-decene in 43% yield. The aminopalladation of PdCl2 complexes of ethylene, propylene, and 1-butene with diethylamine affords the unstable ir-alkylpalladium complex 161, which is converted into the stable chelated acylpalladium complex 162 by treatment with CO[177],... 

---