Palladium phase-transfer

A cousin to this reduction is one using stannous chloride (a.k.a. SnCb, a.k.a. Tin chloride) which is done exactly as the calcium one except that about lOOg of SnCb is used in place of the Mg or Ca and the addition occurs at room temperature and the solution is stirred for one hour rather than 15 minutes. Some very good reductions that operate almost exclusively at room temperature with no pressure and give almost 100% yields are to follow. The only reason Strike did not detail these methods is that some of the chemicals involved are a little less common than Strike is used to but all are available to the public. These alternatives include acetlylacetone and triethylamine [73], propanedithlol and trieth-ylamine [74], triphenylphosphine [75], NaBH4 with phase transfer catalyst [76], H2S and pyridine [77], and palladium hydrox-ide/carbon with hydrazine [78], stannous chloride dihydrate [85]. 

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

This reaction is similar to 13-1 and, like that one, generally requires activated substrates. With unactivated substrates, side reactions predominate, though aryl methyl ethers have been prepared from unactivated chlorides by treatment with MeO in HMPA. This reaction gives better yields than 13-1 and is used more often. A good solvent is liquid ammonia. The compound NaOMe reacted with o- and p-fluoronitrobenzenes 10 times faster in NH3 at — 70°C than in MeOH. Phase-transfer catalysis has also been used. The reaction of 4-iodotoluene and 3,4-dimethylphenol, in the presence of a copper catalyst and cesium carbonate, gave the diaryl ether (Ar—O—Ar ). Alcohols were coupled with aryl halides in the presence of palladium catalysts to give the Ar—O—R ether. Nickel catalysts have also been used. ... 

In 1988, Linstrumelle and Huynh used an all-palladium route to construct PAM 4 [21]. Reaction of 1,2-dibromobenzene with 2-methyl-3-butyn-2-ol in triethylamine at 60 °C afforded the monosubstituted product in 63 % yield along with 3% of the disubstituted material (Scheme 6). Alcohol 15 was then treated with aqueous sodium hydroxide and tetrakis(triphenylphosphine)palladium-copper(I) iodide catalysts under phase-transfer conditions, generating the terminal phenylacetylene in situ, which cyclotrimerized in 36% yield. Although there was no mention of the formation of higher cyclooligomers, it is likely that this reaction did produce these larger species, as is typically seen in Stephens-Castro coupling reactions [22]. 

The reaction of benzotriazoles with aryl halides catalyzed by a mixture of Pd(dppe)Cl2 (DPPE = bis-(diphenylphosphino)ethane) or Pd(dppf)Cl2, copper(I)iodide or copper(II)carboxylates, and a phase-transfer catalyst has been shown to proceed in good yield in DMF solvent.104 Both copper and palladium were required for these reactions to occur at the N-l position in high yields. Similar results for the coupling of amines with aryliodonium salts in aqueous solvent were observed.105... 

Al-Bazi, S. J. Freiser, H. Phase-transfer catalysts in extraction kinetics palladium extraction by dioctyl sulfide and KELEX 100. Inorg. Chem. 1989, 28, 417 120. 

Several microwave-assisted protocols for soluble polymer-supported syntheses have been described. Among the first examples of so-called liquid-phase synthesis were aqueous Suzuki couplings. Schotten and coworkers presented the use of polyethylene glycol (PEG)-bound aryl halides and sulfonates in these palladium-catalyzed cross-couplings [70]. The authors demonstrated that no additional phase-transfer catalyst (PTC) is needed when the PEG-bound electrophiles are coupled with appropriate aryl boronic acids. The polymer-bound substrates were coupled with 1.2 equivalents of the boronic acids in water under short-term microwave irradiation in sealed vessels in a domestic microwave oven (Scheme 7.62). Work-up involved precipitation of the polymer-bound biaryl from a suitable organic solvent with diethyl ether. Water and insoluble impurities need to be removed prior to precipitation in order to achieve high recoveries of the products. 

Another palladium-catalyzed coupling reaction that has been successfully performed on soluble polymers is the Sonogashira coupling. Xia and Wang have presented an approach in which the PEG 4000 utilized simultaneously serves as polymeric support, solvent, and phase-transfer catalyst (PTC) in both the coupling and... 

Reaction of organic halides with alkenes catalyzed by palladium compounds (Heck-type reaction) is known to be a useful method for carbon-carbon bond formation at unsubstituted vinyl positions. The first report on the application of microwave methodology to this type of reaction was published by Hallberg et al. in 1996 [86], Recently, the palladium catalyzed Heck coupling reaction induced by microwave irradiation was reported under solventless liquid-liquid phase-transfer catalytic conditions in the presence of potassium carbonate and a small amount of [Pd(PPh3)2Cl2]-TBAB as a catalyst [87]. The arylation of alkenes with aryl iodides proceeded smoothly to afford exclusively trans product in high yields (86-93%) (Eq. 61). 

Herrmann WA, Brossmer C, Reisinger CP, Riermaier T, Ofele K, Beller M (1997) Coordination chemistry and mechanisms of metal-catalyzed C-C coupling reactions. Part 10. Palladacycles efficient new catalysts for the Heck vinylation of aryl halides. Chem Eur J 3 1357-1364 Iyer S, Jayanthi A (2001) Acetylferrocenyloxime palladacycle-catalyzed Heck reactions. Tetrahedron Lett 42 7877-7878 Iyer S, Ramesh C (2000) Aryl-Pd covalently bonded palladacycles, novel amino and oxime catalysts di- x-chlorobis(benzaldehydeoxime-6-C,AT)dipalla-dium(II), di- x-chlorobis(dimethylbenzylamine-6-C,A)dipalladium(II) for the Heck reaction. Tetrahedron Lett 41 8981-8984 Jeffery T (1984) Palladium-catalysed vinylation of organic halides under solid-liquid phase transfer conditions. J Chem Soc Chem Commun 1287-1289 (b) idem,... 

Aside from alkoxycarbonylations, hydroxycarbonylations in the presence of water to yield allenic carboxylic acids [15] (93, Y = OH) and aminocarbonylations in the presence of amines to give the analogous amides [139] (93, Y = NRR ) have also been carried out, respectively (Scheme 7.13). These products of structure 102 can also be obtained if using the propargylamines 101 with R1 = Ph or R3 Z H as starting materials (Scheme 7.15) [140]. Additionally, hydroxycarbonylations, also termed carboxyla-tions, are successful without palladium catalysis by reaction of propargyl halides and carbon monoxide in the presence of nickel(II) cyanide under phase-transfer conditions [141, 142]. 

In order to keep the mild conditions, hydroxycarbonylation has been performed in biphasic media, maintaining the catalyst in the aqueous phase thanks to water-soluble mono- or diphosphine ligands. In the presence of the sodium salt of trisulfonated triphenylphosphine (TPPTS), palladium was shown to carbonylate efficiently acrylic ester [19], propene and light alkenes [20,21] in acidic media. For heavy alkenes the reduced activity due to the mass transfer problems between the aqueous and organic phases can be overcome by introducing an inverse phase transfer agent, and particularly dimeihyl-/-i-cyclodextrin [22,23]. Moreover, a dicationic palladium center coordinated by the bidentate diphosphine ligand 2,7-bis(sulfonato)xantphos (Fig. 2) catalyzes, in the presence of tolylsulfonic acid for stability reasons, the hydroxycarbonylation of ethylene, propene and styrene and provides a ca. 0.34 0.66 molar ratio for the two linear and branched acids [24],... 

The consecutive reaction of vinyl halides and alkenes with activated methylene systems [42] in the presence of a palladium catalyst and phase-transfer catalyst results from the addition of the methylene carbanion with the initially formed Heck product (Scheme 6.31) an intramolecular version of the reaction leads to the formation of bicycloalk-l-enes (Scheme 6.31) [42], The analogous combined coupling reaction of iodoarenes and activated methylene compounds with non-conjugated dienes under similar conditions forms the monoalkene (Scheme 6.31) [43]. 

When sodium ethoxide is used in place of sodium hydroxide in the carbonylation reaction of benzyl halides with dicobalt octacarbonyl, ethyl esters are produced instead of the acids [15], Esters are also produced directly from iodoalkanes through their reaction with molybdenum hexacarbonyl in the presence of tetra-/i-butylammo-nium fluoride [16]. Di-iodoalkanes produce lactones [16]. The reaction can be made catalytic in the hexacarbonyl by the addition of methyl formate [16]. t-Butyl arylacetic esters are produced in moderate yield (40-60%) under phase-transfer catalytic conditions in the palladium promoted carbonylation reaction with benzyl chlorides [17]. 

Rhodium(III) complexes [e.g. (i-Pr,P)2Rh(H)Cl2] in the presence of quaternary ammonium salts are excellent catalysts for the hydrogenolysis of chloroarenes under mild conditions [5] other labile substituents are unaffected. Hydrodehalogenation of haloaryl ketones over a palladium catalyst to give acylbenzenes is also aided by the addition of Aliquat [6]. In the absence of the phase-transfer catalyst, or when the hydrogenation is conducted in ethanol, the major product is the corresponding alkyl-benzene, which is also produced by hydrodehalogenation of the halobenzyl alcohols. 

Complexes of other metals are also capable of catalyzing useful carbonylation reactions under phase transfer conditions. For example, certain palladium(o) catalysts, like Co2(C0)g, can catalyze the carbonylation of benzylic halides to carboxylic acids. When applied to vinylic dibromides, unsaturated diacids or diynes were obtained, using Pd(diphos)2[diphos l,2-bis(diphenylphosphino)ethane] as the metal catalyst, benzyltriethylammonium chloride as the phase transfer agent, and t-amyl alcohol or benzene as the organic phase(18),... 

A number of modified reaction conditions have been developed. One involves addition of silver salts, which activate the halide toward displacement.94 Use of sodium bicarbonate or sodium carbonate in the presence of a phase-transfer catalyst permits especially mild conditions to be used for many systems.95 Tetraalkylammonium salts often accelerate reaction.96 Solid-phase catalysts in which the palladium is complexed by polymer-bound phosphine groups have also been developed.97 Aryl chlorides are not very reactive under normal Heck reaction conditions, but reaction can be achieved by inclusion of triphenylphosphonium salts with Pd(OAc)2 or PdCl2 as the catalyst.98... 

The counter-ions of some of the quaternary onium groups were exchanged with an anionic phosphine compound, which was then used to complex palladium. Thus, a polymer material containing phase transfer catalyst and transition-metal catalyst groups was obtained (Fig. 20). The Heck-type vinyla-tion reaction [137] was used to examine the catalytic activity of the heterogeneous system. The polymer-supported catalyst was found to compare favourably with the homogeneous system (Fig. 21). 

---