Palladium complexes carboxylic acids

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

Recently, great advancement has been made in the use of air and oxygen as the oxidant for the oxidation of alcohols in aqueous media. Both transition-metal catalysts and organocatalysts have been developed. Complexes of various transition-metals such as cobalt,31 copper [Cu(I) and Cu(II)],32 Fe(III),33 Co/Mn/Br-system,34 Ru(III and IV),35 and V0P04 2H20,36 have been used to catalyze aerobic oxidations of alcohols. Cu(I) complex-based catalytic aerobic oxidations provide a model of copper(I)-containing oxidase in nature.37 Palladium complexes such as water-soluble Pd-bathophenanthroline are selective catalysts for aerobic oxidation of a wide range of alcohols to aldehydes, ketones, and carboxylic acids in a biphasic... 

The reaction of alcohols with CO was catalyzed by Pd compounds, iodides and/or bromides, and amides (or thioamides). Thus, MeOH was carbonylated in the presence of Pd acetate, NiCl2, tV-methylpyrrolidone, Mel, and Lil to give HOAc. AcOH is prepared by the reaction of MeOH with CO in the presence of a catalyst system comprising a Pd compound, an ionic Br or I compound other than HBr or HI, a sulfone or sulfoxide, and, in some cases, a Ni compound and a phosphine oxide or a phosphinic acid.60 Palladium(II) salts catalyze the carbonylation of methyl iodide in methanol to methyl acetate in the presence of an excess of iodide, even without amine or phosphine co-ligands platinum(II) salts are less effective.61 A novel Pd11 complex (13) is a highly efficient catalyst for the carbonylation of organic alcohols and alkenes to carboxylic acids/esters.62... 

Few other examples of such reaction sequences have been described to date. Oh has reported the palladium-catalyzed reductive cyclizations of 1,6-enynes in the presence of formic acid or triethylsilane via an alkylpalladium intermediate and its application to organic synthesis. Palladium complexes also catalyze the conversion of a range of enynes to cyclic 6,7-unsaturated carboxylic acids in the presence of CO.260... 

Thermal decarboxylation of pyrimidylcarboxylic organotin esters is another means to prepare the corresponding stannylpyrimidines [33]. This method obviates the intermediacy of lithiated pyrimidine species that would undergo undesired reactions at higher temperatures. The decarboxylation occurs at the activated positions. Therefore, thermal decarboxylation of tributyltin carboxylate 62, derived from refluxing carboxylic acid 61 with bis(tributyltin) oxide, provided 4-stannylpyrimidine 63. Addition of certain Pd(II) complexes such as bis(acetonitrile)palladium(II) dichloride improved the yields, whereas AIBN and illumination failed to significantly affect the yield. 

In a slightly less convenient procedure, but one which has general versatility, carbonylation of aryl (or vinyl) palladium compounds produces aryl, heteroaryl, and vinyl carboxylic acids. As with the other procedures, immediate upon its formation, the carboxylate anion migrates to the aqueous phase. Consequently, haloaromatic acids can be obtained from dihaloarenes, without further reaction of the second halogen atom, e.g. 1,4-dibromobenzene has been carbonylated (90% conversion) to yield 4-bromobenzoic acid with a selectivity for the monocarbonylation product of 95%. Additionally, the process is economically attractive, as the organic phase containing the catalyst can be cycled with virtually no loss of activity and ca. 4000 moles of acid can be produced for each mole of the palladium complex used [4],... 

Aromatic acid chlorides are converted into the corresponding anhydrides in high yields (>95%), when reacted with carbon monoxide under solid liquid basic catalysed conditions in the presence of a complexed cobalt or palladium salt [6]. In the absence of the quaternary ammonium salt, only hydrolysis to the carboxylic acid occurs. 

Complexes of other metals are also capable of catalyzing useful carbonylation reactions under phase transfer conditions. For example, certain palladium(o) catalysts, like Co2(C0)g, can catalyze the carbonylation of benzylic halides to carboxylic acids. When applied to vinylic dibromides, unsaturated diacids or diynes were obtained, using Pd(diphos)2[diphos l,2-bis(diphenylphosphino)ethane] as the metal catalyst, benzyltriethylammonium chloride as the phase transfer agent, and t-amyl alcohol or benzene as the organic phase(18),... 

The linear telomerization reaction of dienes was one of the very first processes catalyzed by water soluble phosphine complexes in aqueous media [7,8]. The reaction itself is the dimerization of a diene coupled with a simultaneous nucleophilic addition of HX (water, alcohols, amines, carboxylic acids, active methylene compounds, etc.) (Scheme 7.3). It is catalyzed by nickel- and palladium complexes of which palladium catalysts are substantially more active. In organic solutions [Pd(OAc)2] + PPhs gives the simplest catalyst combination and Ni/IPPTS and Pd/TPPTS were suggested for mnning the telomerizations in aqueous/organic biphasic systems [7]. An aqueous solvent would seem a straightforward choice for telomerization of dienes with water (the so-called hydrodimerization). In fact, the possibility of separation of the products and the catalyst without a need for distillation is a more important reason in this case, too. 

The telomerization of butadiene by means of water in ILs was described by Dullius et Rottger et al. report a process for the telomerization of acyclic olefins having at least two conjugated double bonds, or their mixtures, using a palladium-carbene complex as catalyst in an IL solvent. The nucleophiles included water, alcohols, phenols, polyols, carboxylic acids, ammonia and primary and secondary amines. The acycylic olefins could be either 1,3-butadiene or isoprene. 

We reported the use of M-heterocyclic carbene complexes (NHC) for the catalytic activation of methane [55,56]. We found that solutions of N-heterocyclic carbene complexes of palladium(II) in carboxylic acids catalyze the conversion of methane to the corresponding methylesters. The high thermal stability of palladium(II) carbene complexes could be shown for complex 18 (Scheme 22), which we also structurally characterized [120]. An extraordinary feature is the unprecedented resistance of the palladium-NHC-complexes 18-22 under the acidic oxidizing conditions which are necessary for the CH-activation and functionalization. 

If the reaction mixture also contains a nucleophile, then the acyl-palladium complex might undergo displacement of the metal, which usually leads to the formation of a carboxylic acid derivative. The side product in this process is a palladium(II) complex that undergoes reductive elimination to regenerate the catalytically active palladium(O) complex. 

The fate of the acyl palladium complex depends on the circumstances. In the presence of a suitable nucleophile (alcohol, amine) it is converted into the corresponding carboxylic acid derivative. The side product, a palladium hydride is converted to the active form of the catalyst in a reductive elimination step, resulting in the formation of an equimolar amount of acid, which is quenched by an added base (in most cases the excess of the nucleophile). 

The analogous open chain carboxylic acid, Z-non-2-en-4-ynoic acid, when treated with 4-iodoanisole in the presence of a palladium-triphenylphosphine catalyst and potassium carbonate gave a mixture of three products, two of which were isolated (4.41.) z) the pyrone derivative arising from the attack of the anisylpalladium complex at the 4-position, followed by ring closure //) the furane derivative (major product) arising from the... 

Highly selective transformation of terminal acetylenes to either linear or branched carboxylic acids or esters may be achieved by appropriately selected catalyst systems. Branched esters are formed with high selectivity when the acetylenes are reacted with 1-butanol by the catalyst system Pd(dba)2/PPh3/TsOH (dba = dibenzylideneacetone) or palladium complexes containing PPh3. Pd(acac)2 in combination with various N- and O-containing phosphines and methanesulfonic acid is also an efficient catalyst for the alkoxycarbonylation of 1-alkynes to yield the branched product with almost complete selectivity.307,308... 

In a related manner, sodium 2-bromobenzoates have been converted into 2-allylbenzoic acids. A palladium-catalyzed cyclization involving nucleophilic attack of the carboxylate on the palladium-complexed alkene yielded an isocoumarin. However, in situ catalytic hydrogenation results in the formation of an isochroman-l-one. 

Dicarboxylic acids form monomeric complexes with palladium(II), K2[Pd(X2)2] (X2 = oxalate, malonate, etc,).153154 They may be prepared by warming a suspension of palladium(II) chloride with a concentrated solution of the alkali metal dicarboxylate or by using other palladium complexes containing readily substituted ligands such as [Pd(OH)2], [Pd(N03)2(H20)2] or [Pd(02CMe)2]3-155 These complexes are claimed to have useful antitumour properties.155 Complexes [Pd(X2)L2] (X2 = dicarboxylate L = amine or L2 = diamine) may be prepared by reaction of the dichloro complex with a carboxylate salt.156,128... 

Allyl esters, carbonates, and carbamates readily undergo C-O bond cleavage upon reaction with palladium(O) to yield allyl palladium(II) complexes. These complexes are electrophilic and can react with nucleophiles to form products of allylic nucleophilic substitution. Linkers based on this reaction have been designed, which are cleavable by treatment with catalytic amounts of palladium complexes [165,166], For the immobilization of carboxylic acids, support-bound allyl alcohols have proven suitable (Figure 3.12, Table 3.7). 

Esters of allylic alcohols with resin-bound carboxylic acids can be converted into allyl palladium complexes, which react with carbon nucleophiles and with hydride sources to yield the formally reduced allyl derivatives (Entries 3 and 4, Table 3.47). Alkyl sulfonates have been reduced to alkanes with NaBH4 (Entry 5, Table 3.47). Aryl sulfonates (Entry 6, Table 3.47) and aryl perfluoroalkylsulfonates [814] can be reduced to alkanes by treatment with catalytic amounts of Pd(II) and formic acid as a hydride source. 

Arene(tricarbonyl)chromium complexes, 19 Nickel boride, 197 to trans-alkenes Chromium(II) sulfate, 84 of anhydrides to lactones Tetrachlorotris[bis(l,4-diphenyl-phosphine)butane]diruthenium, 288 of aromatic rings Palladium catalysts, 230 Raney nickel, 265 Sodium borohydride-1,3-Dicyano-benzene, 279 of aryl halides to arenes Palladium on carbon, 230 of benzyl ethers to alcohols Palladium catalysts, 230 of carboxylic acids to aldehydes Vilsmeier reagent, 341 of epoxides to alcohols Samarium(II) iodide, 270 Sodium hydride-Sodium /-amyloxide-Nickel(II) chloride, 281 Sodium hydride-Sodium /-amyloxide-Zinc chloride, 281 of esters to alcohols Sodium borohydride, 278 of imines and related compounds Arene(tricarbonyl)chromium complexes, 19... 

The phase-transfer method has also been employed for the carbonylation of benzylic halides to carboxylic acids.477 The palladium(O) complexes [Pd(PPh3)4] (103), [Pd(diphos)2] (104) and [Pd(DBA)2] (105 DBA = dibenzylideneacetone) were used as catalysts. With (103) and (104) the carboxylic acid was the major product. Complex (105) gave little or none of the acid, the toluene and bibenzyl derivatives corresponding to the benzyl halide used being formed. Benzyl esters of the carboxylic acid were sometimes present as minor products. The reaction has been adapted to provide a new synthesis of anthranilic acid derivatives (equation 106).478 Tri-n-butylamine was used to neutralize the HBr formed. 

Non-oxidative hydrocarboxylation of alkenes to carboxylic acids with CO and H20 is catalyzed by palladium complexes such as PdCl2(PhCN)2 or PdCl2(PPh3)2, and a-methyl acids predominate in the presence of HC1.374,443 A recent improvement of this reaction consisted of the use of a PdCl2/CuCl2/HCl catalyst under oxidative conditions.377 Almost quantitative yields of a-methyl carboxylic acids and dicarboxylic acids were obtained from terminal alkenes and terminal dialkenes respectively, at room temperature and atmospheric pressure (equation 174).377... 

Carboxylic acid chlorides and chloroformate esters add to tetrakis(triphenylphosphine)palladium(0) to form acylpalladium derivatives (equation 42).102 On heating, the acylpalladium complexes can lose carbon monoxide (reversibly). Attempts to employ acid halides in vinylic acylations, therefore, often result in obtaining decarbonylated products (see below). However, there are some exceptions. Acylation may occur when the alkenes are highly reactive and/or in cases where the acylpalladium complexes are resistant to decarbonylation and in situations where intramolecular reactions can form five-membered rings. 

---