Palladium-catalyzed bond formations

Tetrahydrocarbazoles and related fused systems have been accessed by a route relying on palladium-catalyzed tandem formation of alkenyl and aryl C-N bonds. For instance, the starting triflate 477 could be efficiently transformed into the target system 478 by amination with aniline (Equation 133) <2005AGE403>. Annulation of (2-triflyloxy)phenethyl carbonates with amides in the presence of a palladium catalyst has been used as a route to various N-substituted indoline derivatives <2005OL4777>. 

It is known that insertion of carbon monoxide to form an acyl complex is reversible, in which results depend on the pressure of carbon monoxide and temperature. If the above-mentioned mechanisms are correct, then acyl halides and aldehydes should be decarbonylated to form olefins provided that an acyl-palladium bond is formed by the oxidative addition of acyl halides or aldehydes to metallic palladium. This proved to be the case. When acyl halide was heated with a catalytic amount of metallic palladium or palladium chloride at 200°C. in a distilling flask, carbon monoxide and hydrogen halide were evolved rapidly, and olefin was collected in a good yield. This reaction is a new and useful preparative method of olefins. In the same way, aldehydes can be decarbonylated smoothly, but in this case, both olefin and the corresponding paraffin Were obtained. The latter probably arises by the hydrogenation of the olefin. Decarbonylation of certain aldehydes has been reported by several workers (3, 6), but no reasonable mechanism has been known. The mechanism of the palladium-catalyzed aldehyde formation discussed above gives clear explanation for the palladium catalyzed decarbonylation of aldehydes. 

Palladium catalysis can also provide an avenue to derivatize the products of cyclization, often in concert with the cyclization itself. Lautens, Bisseret and Alper have all effectively demonstrated the power of this approach in the construction of indole derivatives with a high degree of modularity [51]. These tandem palladium-catalyzed methods have typically employed 1,1-dibromoalkenes in indole cyclization, wherein one vinyl bromide bond is available for palladium-catalyzed indole formation, and the second for subsequent functionalization. As shown in Scheme 6.39,... 

The Heck reaction is considered to be the best method for carbon-carbon bond formation by substitution of an olefinic proton. In general, yields are good to very good. Sterically demanding substituents, however, may reduce the reactivity of the alkene. Polar solvents, such as methanol, acetonitrile, N,N-dimethylformamide or hexamethylphosphoric triamide, are often used. Reaction temperatures range from 50 to 160 °C. There are various other important palladium-catalyzed reactions known where organopalladium complexes are employed however, these reactions must not be confused with the Heck reaction. 

A synthetically useful virtue of enol triflates is that they are amenable to palladium-catalyzed carbon-carbon bond-forming reactions under mild conditions. When a solution of enol triflate 21 and tetrakis(triphenylphosphine)palladium(o) in benzene is treated with a mixture of terminal alkyne 17, n-propylamine, and cuprous iodide,17 intermediate 22 is formed in 76-84% yield. Although a partial hydrogenation of the alkyne in 22 could conceivably secure the formation of the cis C1-C2 olefin, a chemoselective hydrobora-tion/protonation sequence was found to be a much more reliable and suitable alternative. Thus, sequential hydroboration of the alkyne 22 with dicyclohexylborane, protonolysis, oxidative workup, and hydrolysis of the oxabicyclo[2.2.2]octyl ester protecting group gives dienic carboxylic acid 15 in a yield of 86% from 22. 

Volume 2, Catalytic Reactions. An account of palladium-catalyzed reactions involving formation of C—C, C—O, C—H, C-halogen, C—N, C—S, or C—Si bonds, and heterogeneous reactions. 

There are relatively few examples of C-C bond formation on solid surfaces under UHV conditions. There are virtually no examples of catalytic C-C bond formation under such conditions. Perhaps the closest precedent for the present studies on reduced Ti02 can be found in the studies of Lambert et al. on single crystal Pd surfaces. Early UHV studies demonstrated that acetylene could be trimerized to benzene on the Pd(lll) surface in both TPD and modulated molecular beam experiments [9,10]. Subsequent studies by the same group and others [11,12] demonstrated that this reaction could be catalyzed at atmospheric pressure both by palladium single crystals and supported palladium catalysts. While it is not clear that catalysis was achieved in UHV, these and subsequent studies have provided valuable insights into the mechanism of this reaction as catalyzed by metals, including spectroscopic evidence for the hypothesized metallacyclopentadiene intermediates [10,13,14]. 

Jiang L, Buchwald SL (2004) Palladium-catalyzed aromatic carbon-nitrogen bond formation. In de Meijere A, Diedeiich F (eds) Metal-catalyzed cross-coupling reactions, 2nd edn. Wiley-VCH, Weinheim... 

In recentyears, metal NPs synthesized in ILs were recognized as suitable materials to promote the formation of chemical bonds in reactions other than palladium-catalyzed carbon-carbon cross-coupling reactions. For example, aldehydes and esters... 

Recent trend in the synthesis of olefinic pheromones is the use of transition metal-catalyzed cross coupling reaction for carbon-carbon bond formation. Scheme 8 summarizes a synthesis of the termite trail marker pheromone, (3Z,6Z)-3,6-dodecadien- l-ol (2) by Oehlschlager [19]. The key-step is the palladium-catalyzed cross-coupling of allylic chloride A and alkenylalane B. 

Palladium-catalyzed aromatic C—O bond formation is less developed than palladium-catalyzed aryl amination. Except when the aryl halide is strongly electron deficient,107-110 catalysts ligated by the conventional aryl phosphines such as DPPF and BINAP are ineffective for coupling of... 

Nickel and palladium complexes also catalyze the formation of the carbon-phosphorus bonds in phosphorus(V) and phosphorus(III) compounds. Indeed, this chemistry has become a common way to prepare phosphine ligands by the catalytic formation of phosphine oxides and subsequent reduction, by the formation of phosphine boranes and subsequent decomplexation, or by the formation of phosphines directly. The catalytic formation of both aryl and vinyl carbon phosphorus bonds has been accomplished. 

Scheme 150).225 227 The pyran products predominate when the ratio of triphenylphosphine to palladium catalyst exceeds two whereas the linear oligomers are the major products when this ratio is close to unity. The suggested227 mechanism (Scheme 151) includes a step of insertion of C=0 into a C—Pd palladium-catalyzed reactions leading to the formation of pyranones (see Scheme 152)228 and piperidones (see Scheme 139 in Section V,A,2).211 It is useful to note that the 2,5-divinyltetrahydropyran derivative can be transformed catalytically by ruthenium trichloride into synthetically useful 3,4-dihydro-2//-pyran derivatives (Scheme 153).229... 

Development of new methodologies for formation of carbon-carbon bonds has been one of the major tasks in organic chemistry. Obviously, organometallic compounds, particularly zinc derivatives, have found great use in such reactions. During the past several years, there have been several significant reports of nickel- and palladium-catalyzed reactions of dialkylzincs and alkylzinc halides with alkyl halides of diverse structure. A detailed account of most of these studies can be found in a recent review by Knochel et al,246... 

Recently, interest in copper-catalyzed carbon-heteroatom bond-forming reactions has shifted to the use of boronic acids as reactive coupling partners [133], One example of carbon-sulfur bond formation is displayed in Scheme 6.65. Lengar and Kappe have reported that, in contrast to the palladium(0)/copper(l)-mediated process described in Scheme 6.55, which leads to carbon-carbon bond formation, reaction of the same starting materials in the presence of 1 equivalent of copper(II) acetate and 2 equivalents of phenanthroline ligand furnishes the corresponding carbon-sulfur cross-coupled product [113]. Whereas the reaction at room temperature needed 4 days to reach completion, microwave irradiation at 85 °C for 45 min in 1,2-dichloroethane provided a 72% isolated yield of the product. 

A palladium-catalyzed protocol for carbon-sulfur bond formation between an aryl triflate and para-methoxybenzylthiol was introduced by Macmillan and Anderson (Scheme 6.66) [138], Using palladium(II) acetate as a palladium source and 2,2 -bis(diphenylphosphino)-l,l -binaphthyl (BINAP) as a ligand, microwave heating of the two starting materials in N,N-dimethylformamide at 150 °C for 20 min in the presence of triethylamine base led to the formation of the desired sulfide in 85% yield. 

---