Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Palladium benzenes

Benzoic acid and naphthoic acid are formed by the oxidative carbonylation by use of Pd(OAc)2 in AcOH. t-Bu02H and allyl chloride are used as reoxidants. Addition of phenanthroline gives a favorable effect[360], Furan and thiophene are also carbonylated selectively at the 2-position[361,362]. fndole-3-carboxylic acid is prepared by the carboxylation of 1-acetylindole using Pd(OAc)2 and peroxodisulfate (Na2S208)[362aj. Benzoic acid derivatives are obtained by the reaction of benzene derivatives with sodium palladium mal-onate in refluxing AcOH[363]. [Pg.78]

The chiral siloxycyclopropane 106 undergoes carbonylative homocoupling to form the 4-ketopimelate derivative 108 via the palladium homoenolate 107 without racemization. The reaction is catalytic in CHCI3, but stoichiometric in benzene[93]. [Pg.540]

The catalyst commonly used in this method is 5 wt % palladium supported on barium sulfate inhibited with quinoline—sulfur, thiourea, or thiophene to prevent reduction of the product aldehyde. A procedure is found in the Hterature (57). Suitable solvents are toluene, benzene, and xylene used under reflux conditions. Interestingly, it is now thought that Rosenmund s method (59) originally was successful because of the presence of sulfur compounds in the xylene used, since the need for an inhibitor to reduce catalyst activity was not described until three years later (60). [Pg.200]

A route to phenol has been developed starting from cyclohexane, which is first oxidised to a mixture of cyclohexanol and cyclohexanone. In one process the oxidation is carried out in the liquid phase using cobalt naphthenate as catalyst. The cyclohexanone present may be converted to cyclohexanol, in this case the desired intermediate, by catalytic hydrogenation. The cyclohexanol is converted to phenol by a catalytic process using selenium or with palladium on charcoal. The hydrogen produced in this process may be used in the conversion of cyclohexanone to cyclohexanol. It also may be used in the conversion of benzene to cyclohexane in processes where benzene is used as the precursor of the cyclohexane. [Pg.637]

A mechanism for alkene arylation by palladium(II) is given below. The isotope effect was found to be 5 when benzene-dg was used. When styrene-/S,i5-d2 was used. [Pg.255]

The intermediacy of dipolar species such as 186 has been demonstrated by reaction of enamines with 2-hydroxy-1-aldehydes of the aromatic series (129). The enamine (113) reacts in benzene solution at room temperature with 2-hydroxy-1-naphthaldehyde to give the crystalline adduct (188) in 91 % yield. Oxidation with chromium trioxide-pyridine of 188 gave 189 with p elimination of the morpholine moiety. Palladium on charcoal dehydrogenation of 189 gave the known 1,2-benzoxanthone (129). [Pg.157]

Bis(benzonitrile)palladium(II) chloride, benzene, reflux, 16-20 h, 86% yield. [Pg.263]

Pd(Ph3P)2Cl2(Bu3SnH, benzene) or cobalt carbonyl. The palladium method cleaves allyl esters, propargyl phosphates, and propargyl carbamates as well. [Pg.413]

Palladium-catalyzed cycloaddition of (1) to C o has been reported to proceed in 25% yield. Interestingly, the reaction requires the C o be first treated with (PPh3)4Pd and dppe in benzene before the introduction of (1) [17]. [Pg.62]

Aziridines, like oxiranes, undergo hydrogenolysis easily with or without inversion of configuration, depending on the catalyst, reaction parameters, and various additives 65aJ08). For example, hydrogenolysis of 2-methyl-2-phenylaziridine in ethanol occurs mainly with inversion over palladium but with retention over platinum, Raney nickel, or Raney cobalt. Benzene solvent or alkali favor retention over palladium as well. [Pg.139]

Reductive cleavage of phenylhydrazones of carbonyl compounds provides a route to amines. The reduction is carried out conveniently in ethanol containing ammonia over palladium-on-carbon. Ammonia is used to minimize formation of secondary amines, derived by addition of the initially formed amine to the starting material (160). Alternatively, a two-phase system of benzene, cyclohexane, toluene, or dioxane and aqueous hydrochloric acid can be used. [Pg.169]

A mixture of 2.0 g (0.064 mol) of 2-fluoromethyl-3-(o-tolyl)-6-nitro-4(3H)-qulnazolinone, Oi g of 5% palladium-carbon and 100 ml of acetic acid is shaken for 30 minutes in hydrogen gas. The initial pressure of hydrogen gas is adjusted to 46 lb and the mixture is heated with an infrared lamp during the reaction. After 30 minutes of this reaction, the pressure of hydrogen gas decreases to 6 lb. After the mixture is cooled, the mixture is filtered to remove the catalyst. The filtrate is evaporated to remove acetic acid, and the residue is dissolved in chloroform. The chloroform solution is washed with 5% aqueous sodium hydroxide and water, successively. Then, the solution is dried and evaporated to remove solvent. The oily residue thus obtained is dissolved in 2 ml of chloroform, and the chloroform solution is passed through a column of 200 g of silica gel. The silica gel column is eluted with ethyl acetate-benzene (1 1). Then, the eluate is evaporated to remove solvent. The crude crystal obtained is washed with isopropylether and recrystallized from isopropanol. 0.95 g of 2-fluoromethyl-3-(o-tolyl)-6-amino-4(3H)-quinazolinone Is obtained. Yield 52.5% MP 195°-196°C. [Pg.30]

To a solution of 50 grams of 6,7-dimethoxy-3-methyl-T(4 -ethoxy-3 -methoxybenzyl)-dihy-droisoquinoline base in 200 ml of dry benzene are added 150 ml of decalin, and the mixture is distilled until its temperature reaches 180°C. 1.5 grams of 5% palladium on carbon are then added. The mixture is stirred under reflux for about 6 hours to dehydrogenate the dihydroisoquinoline. On cooling, the reaction mixture is diluted with petroleum ether and the precipitated 6,7-dimethoxy-3-methyl-1-(3 -methoxy-4 -ethoxybenzyl)-isoquinoline is filtered off and recrystallized from dilute ethanol. [Pg.513]

The 4-hydroxy-2-methylindole (MP 112°C to 115°C from benzene/ethyl acetate), used as starting material, may be obtained by hydrogenation of 4-banzyloxy-2-dimethylamino-methylindole (MP 117°C to 120°C from benzene) in the presence of a palladium catalyst (5% on aluminum oxide). [Pg.939]

Direct hydroxylation of benzene to phenol could be achieved using zeolite catalysts containing rhodium, platinum, palladium, or irridium. The oxidizing agent is nitrous oxide, which is unavoidable a byproduct from the oxidation of KA oil (see KA oil, this chapter) to adipic acid using nitric acid as the oxidant. [Pg.273]

A synthetically useful virtue of enol triflates is that they are amenable to palladium-catalyzed carbon-carbon bond-forming reactions under mild conditions. When a solution of enol triflate 21 and tetrakis(triphenylphosphine)palladium(o) in benzene is treated with a mixture of terminal alkyne 17, n-propylamine, and cuprous iodide,17 intermediate 22 is formed in 76-84% yield. Although a partial hydrogenation of the alkyne in 22 could conceivably secure the formation of the cis C1-C2 olefin, a chemoselective hydrobora-tion/protonation sequence was found to be a much more reliable and suitable alternative. Thus, sequential hydroboration of the alkyne 22 with dicyclohexylborane, protonolysis, oxidative workup, and hydrolysis of the oxabicyclo[2.2.2]octyl ester protecting group gives dienic carboxylic acid 15 in a yield of 86% from 22. [Pg.458]

Treatment of ethyl 1 W-azepine-l-carboxylate with palladium(II) acetate in benzene, or in an aprotic solvent, results in ring contraction (see Section 3.1.2.4.) or ring opening (vide infra), respectively, however, with palladium(II) acetate in acetic acid ethyl 2,3-diacetoxy-2,3-dihydro-l//-azepine-l-carboxylate (6) is formed as the major product along with ( , )-hexa-2,4-dienedial.243... [Pg.198]

In 1991, Ohfune and coworkers reported palladium(O)-catalyzed carbonylation of vinylaziridines 262 with carbon monoxide (1 atm.) in benzene (Scheme 2.65) [31]. Interestingly, 3,4-trans-azetidinone 264 was exclusively obtained from a dia-stereomeric mixture of trans- and cis-vinylaziridines 262 (3 1). Tanner and Somfai synthesized (+)-PS-5 (267) by use of palladium(O)-catalyzed trons-selective (3-lactam formation in the presence of Pd(dba)3 CHC13 (15mol%) and excess PPh3 in toluene. [Pg.67]

To a flask flushed with nitrogen is added 0.06 mmol of telrakis(triphcnylphosphane)palladium, 2 mmol of (Z)-/ -bromoslyrene, 12 mL of THF and 3 mmol of a solution of the zinc reagent 19B in THF. After stirring for 3 h at 50 CC, the reaction mixture is diluted with 50 mL of benzene, washed quickly with brine and dried over MgS()4. Concentration and bulb-to-bulb distillation (bath 65-70 °C, 0.05 Torr)gives 3as a viscous oil yield 68%. [Pg.269]

A mixture of l,4-dibromo-2,5-bis(3-sulfonatopropoxy)benzene 61 (0.78 g, 1.39 mmol), 60 (0.23 g, 1.39 mmol), Na2C03 (0.99 g) in doubly distilled water (47 mL), and DMF (20 mL) was heated at 85°C until the solids were completely dissolved. The resulting solution was cannulated to a 200-mL Schlenk flask with tris[(sulfonatophenyl)phosphine]palladium(0) (0.045 g) and the mixture was stined at 85°C for 10 h. The reaction mixture was concentrated to 25 mL by boiling and filtered. The filtrate was added dropwise to cold acetone (250 mL) to precipitate out the polymer. The polymer was collected by filtration, redissolved in a minimum of hot water, and reprecipitated by cooling. After repeating this procedure twice, the polymer was redissolved in distilled water and dialyzed for 72 h in 3500 gmol 1 cutoff membrane. After drying under vacuum, polymer 63 was obtained in 64% (0.42 g). [Pg.493]

Palladium(II) acetate reacts with N,N, N"-triphenylguanidine ( = HTpg) in warm benzene to form a bis-adduct which, under more forcing conditions, converts to the novel dinuclear guanidinate-bridged complex [Pd(/L-Tpg)... [Pg.287]


See other pages where Palladium benzenes is mentioned: [Pg.243]    [Pg.243]    [Pg.59]    [Pg.407]    [Pg.407]    [Pg.163]    [Pg.200]    [Pg.124]    [Pg.61]    [Pg.40]    [Pg.45]    [Pg.125]    [Pg.57]    [Pg.40]    [Pg.117]    [Pg.253]    [Pg.1094]    [Pg.566]    [Pg.579]    [Pg.591]    [Pg.271]    [Pg.201]    [Pg.234]    [Pg.23]    [Pg.23]    [Pg.48]    [Pg.259]    [Pg.89]    [Pg.121]    [Pg.724]    [Pg.1008]   
See also in sourсe #XX -- [ Pg.468 ]




SEARCH



1.3.5- Tris benzene reaction with palladium

Benzene derivatives palladium reactions

Benzene phenyl-palladium

Benzene, nitrohydrogenation catalysts, palladium complexes

Benzene-, chloro palladium

Cross-coupling, palladium-catalyzed, benzene

Palladium benzene macrocycles

Palladium complexes benzene

© 2024 chempedia.info