Ozonides oxidation

Ozonolysis as used below is the oxidation process involving addition of ozone to an alkene to form an ozonide intermediate which eventually leads to the final product. Beyond the initial reaction of ozone to form ozonides and other subsequent intermediates, it is important to recall that the reaction can be carried out under reductive and oxidative conditions. In a general sense, early use of ozonolysis in the oxidation of dienes and polyenes was as an aid for structural determination wherein partial oxidation was avoided. In further work both oxidative and reductive conditions have been applied . The use of such methods will be reviewed elsewhere in this book. Based on this analytical use it was often assumed that partial ozonolysis could only be carried out in conjugated dienes such as 1,3-cyclohexadiene, where the formation of the first ozonide inhibited reaction at the second double bond. Indeed, much of the more recent work in the ozonolysis of dienes has been on conjugated dienes such as 2,3-di-r-butyl-l,3-butadiene, 2,3-diphenyl-l,3-butadiene, cyclopentadiene and others. Polyethylene could be used as a support to allow ozonolysis for substrates that ordinarily failed, such as 2,3,4,5-tetramethyl-2,4-hexadiene, and allowed in addition isolation of the ozonide. Oxidation of nonconjugated substrates, such as 1,4-cyclohexadiene and 1,5,9-cyclododecatriene, gave only low yields of unsaturated dicarboxylic acids. In a recent specific example... 

Ozonides oxidize A /V -disubstituted PD 11 in weak acid catalyzed reactions into the respective BQDI 53, Scheme 8 [3,4], The intermediary formed Wurster s cation-radical 49 disproportionates. Formation of a-hydroperoxides of the type 160 was proposed for the reaction of 11 with 4. A relinking of the broken rubber chains may arise via the reaction of 160 with the second zwitterion. 

Perfluoroalkyl ethylene, CF3(CF2CF2) CH=CH2, obtained by dehalogena-tion of perfluoroalkylethyl iodide, is treated with ozone to give ozonides. Oxidative cleavage of the ozonides with hydrogen peroxide yields perfluoroalkanoic acids [132]. 

Excess of ozone should be avoided since further oxidation may occur to oxozonides or perozonides. ) The ozonides are usually not isolated since they are generally viscid oils or glasses, sometimes with violently explosive properties particularly on warming. They can, however, be completely... 

Aldehydes are easily oxidized to carboxylic acids under conditions of ozonide hydroly SIS When one wishes to isolate the aldehyde itself a reducing agent such as zinc is included during the hydrolysis step Zinc reduces the ozonide and reacts with any oxi dants present (excess ozone and hydrogen peroxide) to prevent them from oxidizing any aldehyde formed An alternative more modem technique follows ozone treatment of the alkene m methanol with reduction by dimethyl sulfide (CH3SCH3)... 

This cleavage reaction is more often seen in structural analysis than in synthesis The substitution pattern around a dou ble bond is revealed by identifying the carbonyl containing compounds that make up the product Hydrolysis of the ozonide intermediate in the presence of zinc (reductive workup) permits aide hyde products to be isolated without further oxidation... 

Commercially, pure ozonides generally are not isolated or handled because of the explosive nature of lower molecular weight species. Ozonides can be hydrolyzed or reduced (eg, by Zn/CH COOH) to aldehydes and/or ketones. Hydrolysis of the cycHc bisperoxide (8) gives similar products. Catalytic (Pt/excess H2) or hydride (eg, LiAlH reduction of (7) provides alcohols. Oxidation (O2, H2O2, peracids) leads to ketones and/or carboxyUc acids. Ozonides also can be catalyticaHy converted to amines by NH and H2. Reaction with an alcohol and anhydrous HCl gives carboxyUc esters. 

AH of the commercial inorganic peroxo compounds except hydrogen peroxide are described herein, as are those commercial organic oxidation reactions that are beheved to proceed via inorganic peroxo intermediates. Ozonides and superoxides are also included, but not the dioxygen complexes of the transition metals. 

The ozonides are characterized by the presence of the ozonide ion, O - They are generally produced by the reaction of the inorganic oxide and ozone (qv). Two reviews of ozonide chemistry are available (1,117). Sodium ozonide [12058-54-7] NaO potassium ozonide [12030-89-6] 35 rubidium ozonide [12060-04-7] RbO and cesium ozonide [12053-67-7] CsO, have all been reported (1). Ammonium ozonide [12161 -20-5] NH O, and tetramethylammonium ozonide [78657-29-1/, (CH ) NO, have been prepared at low temperatures (118). 

Other methods have been described to produce dodecanedioic acid. Cyclododecene is prepared from cyclododecatriene by partial hydrogenation. Ozonolysis of the cyclododecene followed by oxidation of the intermediate ozonides gives dodecanedioic acid (72). Hydrogenation of riciaoleic acid gives 12-hydroxystearic acid, which upon treatment with caustic at high temperatures, 325—330°C, gives a mixture of undecanedioic and dodecanedioic acids. 

Propylene oxide — see Oxirane, methyl-Propylene ozonide — see 1,2,4-Trioxolane, 3-methyl-Propyliodone X-ray contrast and, 2, 520 Propynal... 

Most frequent are oxidations of alkenes that can be converted to a series of compounds such as epoxides, halohydnns and their esters, ozonides (1,2,4 tri-oxolanes), a-hydroxyketones, a-hydroxyketone fluorosulfonates, ot-diketones, and carboxylic acids and their denvatives... 

CIS- And trans-1,2-difluoroethylene are oxidized by ozone stereoselectively to a mixture of the corresponding epoxides and ozonides with formyl fluoride The composition of the mixture depends on the solvent used [25] (equation 16)... 

In addition to the oxides MO, peroxides MO2 are known for the heavier alkaline earth metals and there is some evidence for yellow superoxides M(02)2 of Ca, Sr and Ba impure ozonides Ca(03)2 and Ba(03)2 have also been reported. As with the alkali metals, stability... 

Because ozonides are active oxygen compds, they can be used as oxidizing agents, polymerization catalysts, bleaching agents, and germicides. 

Few kinetic studies of the decompositions of higher oxides have been reported one probable reason is that the preparation of pure samples of these highly reactive compounds is difficult. Accordingly, interest has been largely restricted to the most readily available substances which are the alkali and alkaline earth peroxides (02-), superoxides (02) and ozonides (03). Some of these may be hydrated. E values reported [656] for the dehydrations of M02 8 H20 (288—313 K) were 96, 163 and 63 kJ mole-1 for the Ca, Sr and Ba compounds, respectively. 

The oxidation number of oxygen is —2 in most of its compounds. Exceptions are its compounds with fluorine (in which case, the previous statement takes precedence) and its occurrence as peroxides (022-), superoxides (02 ), and ozonides (03 ). 

Due to the retractive forces in stretched mbber, the aldehyde and zwitterion fragments are separated at the molecular-relaxation rate. Therefore, the ozonides and peroxides form at sites remote from the initial cleavage, and underlying mbber chains are exposed to ozone. These unstable ozonides and polymeric peroxides cleave to a variety of oxygenated products, such as acids, esters, ketones, and aldehydes, and also expose new mbber chains to the effects of ozone. The net result is that when mbber chains are cleaved, they retract in the direction of the stress and expose underlying unsaturation. Continuation of this process results in the formation of the characteristic ozone cracks. It should be noted that in the case of butadiene mbbers a small amount of cross-linking occurs during ozonation. This is considered to be due to the reaction between the biradical of the carbonyl oxide and the double bonds of the butadiene mbber [47]. 

---