Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ozone features

Couillard and Craighead (1994) showed that direct application of positive photoresist could be achieved on a thick layer of macroporous sihcon and that the photoresist pattern could subsequently be transferred via an O2 plasma etch. The photoresist was developed in a basic solvent (tetramethylammonium hydroxide or TMAH). These developers rapidly dissolve high-porosity microporous silicon features however, PS formed from lightly doped n-type Si can survive this treatment. Positive photoresists and alkaline developers (typically containing metal ions such as potassium borate) can be used directly on PS if the surface is first partially oxidized by exposure to ozone. Features of 500 pm diameter were fabricated in this manner on a 60-cycle ruggate filter on... [Pg.410]

Processing ndProperties. Neoprene has a variety of uses, both in latex and dry mbber form. The uses of the latex for dipping and coating have already been indicated. The dry mbber can be handled in the usual equipment, ie, mbber mills and Banbury mixers, to prepare various compounds. In addition to its excellent solvent resistance, polychloroprene is also much more resistant to oxidation or ozone attack than natural mbber. It is also more resistant to chemicals and has the additional property of flame resistance from the chlorine atoms. It exhibits good resiUence at room temperature, but has poor low temperature properties (crystallization). An interesting feature is its high density (1.23) resulting from the presence of chlorine in the chain this increases the price on a volume basis. [Pg.470]

Thus oxygen can feature in a wide variety of compounds including ozone, oxides, water, hydrogen peroxide, carbonates, nitrates/nitrites, etc. It comprises about 21% of normal air (by volume). [Pg.31]

A typical ozone system consists of 100 g/hr at a concentration of 1.0 percent to 1.5 percent in air fed to the bottom of bleach collection tanks through ceramic spargers (pore size of approximately 100 t). The system contains air compression and drying equipment, automatic control features, and a flat-plate, air-cooled ozone generator. Regeneration of bleach wastes totaling about 10,000 gallons a year, and recovery of other chemicals can also be cost effective. [Pg.490]

An interesting feature of the synthesis is the use of allyl as a two-carbon extension unit. This has been used in the stereospecific synthesis of dicyclohexano-18-crown-6 (see Eq. 3.13) and by Cram for formation of an aldehyde unit (see Eq. 3.55). In the present case, mannitol bis-acetonide was converted into its allyl ether which was ozonized (reductive workup) to afford the bis-ethyleneoxy derivative. The latter two groups were tosylated and the derivative was allowed to react with its precursor to afford the chiral crown. The entire process is shown below in Eq. (3.59). [Pg.52]

Thus, the mean temperature of the atmosphere, which is about 20°C at sea level, falls steadily to about —55° at an altitude of 10 km and then rises to almost 0°C at 50 km before dropping steadily again to about —90° at 90 km. Concern was expressed in 1974 that interaction of ozone with man-made chlorofluorocarbons would deplete the equilibrium concentration of ozone with potentially disastrous consequences, and this was dramatically confirmed by the discovery of a seasonally recurring ozone hole above Antarctica in 1985. A less prominent ozone hole was subsequently detected above the Arctic Ocean. The detailed physical and chemical conditions required to generate these large seasonal depletions of ozone are extremely complex but the main features have now been elucidated (see p. 848). Several accounts of various aspects of the emerging story, and of the consequent international governmental actions to... [Pg.608]

A cursory inspection of key intermediate 8 (see Scheme 1) reveals that it possesses both vicinal and remote stereochemical relationships. To cope with the stereochemical challenge posed by this intermediate and to enhance overall efficiency, a convergent approach featuring the union of optically active intermediates 18 and 19 was adopted. Scheme 5a illustrates the synthesis of intermediate 18. Thus, oxidative cleavage of the trisubstituted olefin of (/ )-citronellic acid benzyl ester (28) with ozone, followed by oxidative workup with Jones reagent, affords a carboxylic acid which can be oxidatively decarboxylated to 29 with lead tetraacetate and copper(n) acetate. Saponification of the benzyl ester in 29 with potassium hydroxide provides an unsaturated carboxylic acid which undergoes smooth conversion to trans iodolactone 30 on treatment with iodine in acetonitrile at -15 °C (89% yield from 29).24 The diastereoselectivity of the thermodynamically controlled iodolacto-nization reaction is approximately 20 1 in favor of the more stable trans iodolactone 30. [Pg.239]

Another major feature of the vertical thermal structure of the atmosphere is due to the presence of ozone, O3, in the stratosphere. This layer is caused by photochemical reactions involving oxygen. The absorption of solar UV radiation by O3 causes the temperature in the stratosphere and mesosphere to be much higher than expected from an extension of the... [Pg.137]

Ozone and carbon dioxide demonstrate that p orbitals can overlap side by side with more than one neighbor. This feature can lead to a system of 7r bonds that can extend over many atoms. Extended systems can be long chains, or they can be more compact clusters or rings. We begin by describing two examples of four-atom tt systems, butadiene and the carbonate anion. [Pg.713]

This discussion of the structures of diene polymers would be incomplete without reference to the important contributions which have accrued from applications of the ozone degradation method. An important feature of the structure which lies beyond the province of spectral measurements, namely, the orientation of successive units in the chain, is amenable to elucidation by identification of the products of ozone cleavage. The early experiments of Harries on the determination of the structures of natural rubber, gutta-percha, and synthetic diene polymers through the use of this method are classics in polymer structure determination. On hydrolysis of the ozonide of natural rubber, perferably in the presence of hydrogen peroxide, carbon atoms which were doubly bonded prior to formation of the ozonide... [Pg.243]

Global warming and ozone depletion are the two primary global hazards associated with chemicals production and use. Chemicals that have structural features capable of absorbing infra-red radiation have the potential to contribute to global warming (see Table 2.4). ... [Pg.37]

These instruments feature keyboard entry of instrument parameters which combined with digital displays, simplifying instrument operation. A high-output pulsed xenon lamp, having low power consumption and minimal ozone production, is incorporated within the optical module. [Pg.29]

An important aspect of the Gao-Marcus model is that it provides a theoretical structure for the understanding of quantum state density isotope effects in general, and is not specifically confined to the formation of ozone itself. This feature is important because as discussed above we are now aware that MIF s occur widely in nature. The theory aids in prediction of where MIF s will be likely found, and once found, in rationalizing how they were chemically produced. [Pg.452]

A mechanism has been proposed recently by O Neal and Blumstein for the gas-phase ozone-olefin reaction. This mechanism postulates that molozonide-biradical equilibrium is reached fast and postulates a competition between a-, 8-, and y-hydrogen abstraction reactions and the classical mechanism proposed by Criegee for the liquid-phase reaction. The main features of the Criegee mechanism (Figure 3-9) are the formation, from the initial molozonide, of the major carbonyl products and a second biradical intermediate, the zwitterion. The decomposition pathways of the zwitterion comprise unimolecular re-... [Pg.72]

When a monitoring site is selected, it is important to take account of environmental features. For example, ozone measured in or near automotive traffic can drop to 50% of the areawide value, owing to reaction with the nitric oxide firom exhaust emission. Ozone measured 7.5 m from a large tree in green leaf can drop to 70% of the areawide value, but it may also be reduced within 1 m of shrubs and grass. Paint, asphalt, concrete, dry soil, and dead vegetation are not as reactive and so have less effect. Peak ozone values observed in sunlit windscreened. [Pg.247]

One feature of the response to oxidants (in particular, ozone) that has stimulated considerable interest is the apparent development of tolerance to the acute effects of short-term exposure to these agents in laboratory animals. Fairchild reviewed possible mechanisms of this phenomenon. Tolerance has been defined as the increased capacity of an organism that has been pre-exposed to oxidant to resist the effects of later exposures to ordinarily lethal (or otherwise injurious) doses of the same agent or of different agents (cross-tolerance) with similar toxicologic properties. [Pg.336]

Large hospital in a small catchment area a dedicated treatment should be adopted, featuring advanced biological and oxidation processes (AOPs), such as ultrafiltration membrane biological reactors (MBRs), and then ozone/UV, which also guarantees efficient disinfection. [Pg.164]


See other pages where Ozone features is mentioned: [Pg.380]    [Pg.498]    [Pg.8]    [Pg.219]    [Pg.2178]    [Pg.337]    [Pg.788]    [Pg.25]    [Pg.26]    [Pg.1167]    [Pg.101]    [Pg.103]    [Pg.103]    [Pg.707]    [Pg.30]    [Pg.217]    [Pg.225]    [Pg.70]    [Pg.309]    [Pg.287]    [Pg.312]    [Pg.4]    [Pg.92]    [Pg.101]    [Pg.119]    [Pg.48]    [Pg.220]    [Pg.156]    [Pg.166]    [Pg.389]    [Pg.274]    [Pg.35]   
See also in sourсe #XX -- [ Pg.316 ]




SEARCH



Ozone Treatment Technology Features and Application Benefits

© 2024 chempedia.info