Oxidation-reduction reactions definitions used

Many half-reactions of interest to biochemists involve protons. As in the definition of AG °, biochemists define the standard state for oxidation-reduction reactions as pH 7 and express reduction potential as E °, the standard reduction potential at pH 7. The standard reduction potentials given in Table 13-7 and used throughout this book are values for E ° and are therefore valid only for systems at neutral pH Each value represents the potential difference when the conjugate redox pair, at 1 m concentrations and pH 7, is connected with the standard (pH 0) hydrogen electrode. Notice in Table 13-7 that when the conjugate pair 2ET/H2 at pH 7 is connected with the standard hydrogen electrode (pH 0), electrons tend to flow from the pH 7 cell to the standard (pH 0) cell the measured E ° for the 2ET/H2 pair is -0.414 V... 

Before we review the methods used to determine surface acidity, we wish to define the type of acidity that should be measured. An acid is an electron-pair acceptor. In our opinion, the term acid should be limited to this definition rather than broadening the term to include oxidizing agents as well. We agree with Flockhart and Pink (10) who suggest a clear distinction be made between Lewis acid-Lewis base reactions (which involve coordinate bond formation) and oxidation-reduction reactions (which involve complete transfer of one or more electrons). 

All the oxidation-reduction reactions used in examples (a) to (e) proceed in one definite direction e.g. Fe3+ can be reduced by Sn2+, but the opposite process, the oxidation of Fe2+ by Sn4+ will not take place. That is why the single arrow was used in all the reactions, including the half-cell processes as well. If however we examine one half-cell reaction on its own, we can say that normally it is reversible. Thus, while Fe3+ can be reduced (e.g. by Sn2+) to Fe2+, it is also true that with a suitable agent (e.g. MnO ) Fe2+ can be oxidized to Fe3+. It is quite logical to express these half-cell reactions as chemical equilibria, which also involve electrons, as... 

Definitions of oxidation and reduction based solely on the transfer of O atoms are too restrictive. By using broader definitions, many reactions can be described as oxidation-reduction reactions, even when no oxygen is involved. 

The last definition has widespread use in the volumetric analysis of solutions. If a fixed amount of reagent is present in a solution, it can be diluted to any desired normality by application of the general dilution formula V,N, = V N. Here, subscripts 1 and 2 refer to the initial solution and the final (diluted) solution, respectively V denotes the solution volume (in milliliters) and N the solution normality. The product VjN, expresses the amount of the reagent in gram-milliequivalents present in a volume V, ml of a solution of normality N,. Numerically, it represents the volume of a one normal (IN) solution chemically equivalent to the original solution of volume V, and of normality N,. The same equation V N, = V N is also applicable in a different context, in problems involving acid-base neutralization, oxidation-reduction, precipitation, or other types of titration reactions. The justification for this formula relies on the fact that substances always react in titrations, in chemically equivalent amounts. 

In certain cases, these rules, and most other definitions of oxidation and reduction, give counter-intuitive or contradictory results (12). For this reason, in part, few general works on organic reactivity place significant emphasis on reactions classified as oxidations or reductions (major exceptions are 13-17). Environmental chemists, on the other hand, still find it useful to classify organic transformations as oxidations or reductions (e.g., 2, 9,11, 18,19) because the environments in which they occur are often distinctive in this regard. The major (abiotic, non-photochemical) oxidation and reduction reactions that influence the environmental fate of organic contaminants are summarized in the two sections that follow. 

There is nothing in the foregoing discussion that restricts it to reactions at the cathode or to ions it holds, in fact, for any electrode process, either anodic, i.e., oxidation, or cathodic, i.e., reduction, using the terms oxidation and reduction in their most general sense, in which the concentration of the reactant is decreased by the electrode process, provided the potential-determining equilibrium is attained rapidly. The fundamental equation (10) is applicable, for example, to cases of reversible oxidation of ions, e.g., ferrous to ferric, ferrocyanide to ferricyanide, iodide to iodine, as well as to their reduction, and also to the oxidation and reduction of non-ionized substances, such as hydroquinone and qui-none, respectively, that give definite oxidation-reduction potentials. 

Oxidation originally meant combination with oxygen and reduction removal of oxygen . These definitions have been greatly expanded. Oxidation implies combination with a more electronegative element, the removal of a less electronegative one, or simply the removal of electrons. Reduction is the reverse of oxidation and in general implies addition of electrons. In any reaction where one species is oxidized, another must be reduced the term redox reaction is used to express this. 

Oxidation and Reduction Some Definitions 578 16.5 The Activity Series Predicting Spontaneous Redox Reactions 589 16.7 Electrolysis Using Electricity to Do Chemistry 597... 

These definitions of oxidation and reduction are useful because they show the origin of the term oxidation, and they allow us to quickly identify reactions involving elemental oxygen as oxidation and reduction reactions. However, as you will see, these definitions are not the most fundamental. 

---