Organic compound decomposition

Animals and plants, especially roots and microorganisms, provide biochemical, bioorganic, and organic compounds to soil. These may be in the form of cellular components, such as cell walls, membranes, enzymes, and complex and simple organic compounds. Decomposition of complex cellular material and... 

The availability of contaminating organic compounds is also often described by their partition coefficient between water and a solvent, most often octanol. The more soluble a compound is in water, the more available for decomposition. By describing the solubility ratio, the relative rates of organic compound decomposition in soil can be estimated [3],... 

TGA also provides quantitative information on organic compound decompositions, and is particularly useful for studying polymers. An example is the use of TGA to determine the amount of vinyl acetate in copolymers of vinyl acetate and polyethylene. On heating, each mole of vinyl acetate present loses 1 mole of acetic acid. A TGA study of several vinyl acetate-polyethylene copolymers is presented in Fig. 16.9. 

To first-order reactions belong reaction of ion dissociation, many organic compounds decomposition reactions and radioactive decay. For them half-life is determined from a relatively simple equation... 

Scheme 3.23 General mechanisms of organic compound decomposition initiated by attack of oxyl radicals generated by GO.

Antibacterial, deodorizing and self-cleaning functions of photocatalyst derive from the organic compound decomposition ability of active oxygen, generated from photocatalytic reaction. For the purpose of improving oxidative degradation activity, it is essential to reduce the recombination of photo-excited electron-hole pair. 

The additives for improving the cetane number, called pro-cetane, are particularly unstable oxidants, the decomposition of which generates free radicals and favors auto-ignition. Two families of organic compounds have been tested the peroxides and the nitrates. The latter are practically the only ones being used, because of a better compromise between cost-effectiveness and ease of utilization. The most common are the alkyl nitrates, more specifically the 2-ethyl-hexyl nitrate. Figure 5.12 gives an example of the... 

Bromine is used in the manufacture of many important organic compounds including 1,2-dibromoethane (ethylene dibromide), added to petrol to prevent lead deposition which occurs by decomposition of the anti-knock —lead tetraethyl bromomethane (methyl bromide), a fumigating agent, and several compounds used to reduce flammability of polyester plastics and epoxide resins. Silver(I) bromide is used extensively in the photographic industry... 

The method of hydrolysis depends on the nature of the product. It is usually sufficient to add dilute sulphuric acid to the ethereal solution and to shake thoroughly, when the magnesium enters the aqueous solution, whilst the organic compound remains in the ether. Alternatively, however, the ethereal solution may be poured on to ice and water, and then treated with dilute sulphuric acid. Should the product be affected by this acid, the hydrolysis can be carried out with an aqueous solution of ammonium chloride. In the following examples the hydrolysis is usually shown as a simple double decomposition... 

A narrow wire (a) heated in the vapor of an organic compound such as benzonitrile causes decomposition of the nitrile and the formation of whiskery growths on the surface of the wire (b). The sizes of the growths are exaggerated for purposes of illustration and are, in fact, very small in relation to the diameter of the wire. 

Thus, for a successful fluorination process involving elemental fluorine, the number of coUisions must be drasticaUy reduced in the initial stages the rate of fluorination must be slow enough to aUow relaxation processes to occur and a heat sink must be provided to remove the reaction heat. Most direct fluorination reactions with organic compounds are performed at or near room temperature unless reaction rates are so fast that excessive fragmentation, charring, or decomposition occurs and a much lower temperature is desirable. 

Spent acid burning is actually a misnomer, for such acids are decomposed to SO2 and H2O at high temperatures in an endothermic reaction. Excess water in the acid is also vaporized. Acid decomposition and water vaporization require considerable heat. Any organic compounds present in the spent acid oxidize to produce some of the required heat. To supply the additional heat required, auxiUary fuels, eg, oil or gas, must be burned. When available, sulfur and H2S are excellent auxiUary fuels. 

Benzyl chloride undergoes self-condensation relatively easily at high temperatures or in the presence of trace metallic impurities. The risk of decomposition during distillation is reduced by the use of various additives including lactams (43) and amines (44,45). Lime, sodium carbonate, and triethylamine are used as stabilizers during storage and shipment. Other soluble organic compounds that are reported to function as stabilizers in low concentration include DMF (46), arylamines (47), and triphenylphosphine (48). 

Organic Solids A few organic compounds decompose before melting, mostly nitrogen compounds azides, diazo compounds, and nitramines. The processes are exothermic, classed as explosions, and may follow an autocatalytic law. Temperature ranges of decomposition are mostly 100 to 200°C (212 to 392°F). Only spotty results have been obtained, with no coherent pattern. The decomposition of malonic acid has been measured for both the solid and the supercooled liquid. The first-order specific rates at 126.3°C (259.3°F) were 0.00025/min for solid and 0.00207 for liquid, a ratio of 8 at II0.8°C (23I.4°F), the values were 0.000021 and 0.00047, a ratio of 39. The decomposition of oxalic acid (m.p. I89°C) obeyed a zero-order law at 130 to I70°C (266 to 338°F). 

Goldschmidt and Beer have examined the products formed during the thermal decomposition of diacyl peroxides of the type [COgMe —(CHziw—CHz—COO] 2, where n = 1 and 3, in the presence of a series of organic compounds including pyridine and acridine. The products and yields of the reaction with some aromatic and heterocyclic compounds are shown in Table VI. As expected, acridine and... 

Sulphates, silicates, carbonates, colloids and certain organic compounds act as inhibitors if evenly distributed, and sodium silicate has been used as such in certain media. Nitrates tend to promote corrosion, especially in acid soil waters, due to cathodic de-polarisation and to the formation of soluble nitrates. Alkaline soils can cause serious corrosion with the formation of alkali plumbites which decompose to give (red) lead monoxide. Organic acids and carbon dioxide from rotting vegetable matter or manure also have a strong corrosive action. This is probably the explanation of phenol corrosion , which is not caused by phenol, but thought to be caused by decomposition of jute or hessian in applied protective layers. ... 

There are many organic compounds with useful electronic and/or optical properties and with sufficiently high volatility to be evaporable at a temperature well below that at which decomposition occurs. Since thermal evaporation lends itself to facile multilayering, organic compounds may be selected for use in one or more function electron injection, electron transport, hole injection, hole transport, andI or emission. A complete list of materials that have been used in OLEDs is too vast to be included here. Rather, we list those that have been most extensively studied. 

Volume 4 Volume 5 Decomposition of Inorganic and Organometallic Compounds Decomposition and Isomerisation of Organic Compounds Section 3. INORGANIC REACTIONS... 

---