Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Optimum safety

Optimum safety and health are required to prevent personal injury to chemical surety agents. Facility System Safety is one avenue used to achieve optimum safety and health in operations that deal with these agents. [Pg.212]

Division 2/Zone 2, will provide increased design flexibility, lower cost to build, simpler maintenance, optimum safety and suitability for the widest range of applications and requirements. Division 1 (Zone 1) will allow the use of analyzer optical windows, as well as dynamic and static elastomer seals, without the need for additional electrical protechon methods such as purging, continuous dUuhon or pressurization. [Pg.342]

For the packaging materials, in general the contents (protection and safety of the contents inside the package), and the environment, are both important for protection, and any packaging material is supposed to provide optimum safety both to the goods inside the package and to the environment outside. [Pg.110]

Ce lie Ck)8s Reactor Design Analysis, prepared a study document (Ki(-75 3J - attached) to determine the optimum safety circuit logic Ohis document has been used as the basis for the overall program presented in Section V ... [Pg.82]

ABSTRACT The critical infrastructure is a set of mutually interconnected networks, i.e. the systems of various sectors of hiunan system. An interconnection of systems means the mumal dependence. Therefore, in linkage with the safe critical infrastructure and with sustainable development potential there is necessary to solve several problems, namely safety of partial infrastructures and safety of a set of mutually dependent infrastructures. With regard to a present knowledge we know that the optimum safety of the set of infrastructures there is not the set of optimum safeties of partial infrastructures, and therefore, we must search for solution by other way. The work indicates a possible approach for solution acquisition. [Pg.1775]

As safe as is practical may be expressed as the best degree of safety, optimum safety, or optimum risk management within constraints (operational effectiveness, cost, and time). [Pg.15]

Explain the gap between compliance safety and optimum safety, and discuss its significance to future safety efforts. [Pg.56]

Safety engineering is concerned with the planning, development, improvement, coordination, and evaluation of the safety component of integrated systems of individuals, materials, equipment, and environments to achieve optimum safety effectiveness in terms of both protection of people and protection of property. [Pg.259]

Obviously, the need to ensure optimum safety in a given system, industry, or process is absolutely essential. In fact, with certain critical functions of a system, there is no room for error or failure, as is evidenced in some of the examples listed above. Thus, sc ety becomes a function of the situation in which it is measured (Leveson 1986). [Pg.10]

Collaboration with the planning department and the supplying firms (suppliers of machinery, etc.) with a view to achieving optimum safety conditions both in the normal running and in the maintenance and repair of plant. [Pg.355]

Ralox 46 is a tried and tested antioxidant for natural and synthetic latices which by long-term experience has shown to provide optimum safety with respect to stabilization. [Pg.105]

Safety relies both on adequate measures to avoid or tolerate faults (as safeguards against systematic failme) and on adequate measures to control random failures. Measures against both causes of failure are balaneed in order to aehieve the optimum safety performanee of the vehicle. To achieve this, the eoneept of Safety Integrity Levels (SIL) is used. Safety integrity can be viewed as a eombina-... [Pg.117]

Good design and a high manufacturing quahty of radiation sources are essential for optimum safety. The BSS [17] state the following in Appendix IV ... [Pg.20]

Optimum safety The associated risks that have been identified have been accepted provided that all identified controls are implemented and enforced. [Pg.329]

For the flame to be effective, it must be oxidizing (represented by a blue flame). Correct flame control is very important. A basic flamer will complete simple work specially designed flame control systems are recommended for routine operations and long production runs. These systems are fitted with gas and air control valves to compensate for pressure fluctuations, ensuring that the mixture is always at its optimum. Safety devices, such as flame failure shutdown, are fitted as standard. Automatic ignition is also standard. Hame nozzle design is important for these normally single or double row... [Pg.56]


See other pages where Optimum safety is mentioned: [Pg.54]    [Pg.93]    [Pg.605]    [Pg.313]    [Pg.16]    [Pg.17]    [Pg.51]    [Pg.5]    [Pg.11]    [Pg.18]    [Pg.19]    [Pg.53]    [Pg.165]    [Pg.166]    [Pg.252]    [Pg.83]    [Pg.13]    [Pg.38]    [Pg.266]    [Pg.50]    [Pg.63]    [Pg.342]   
See also in sourсe #XX -- [ Pg.329 ]




SEARCH



© 2024 chempedia.info