Optical properties complexes

In our further considerations we start from the assumption that the geometrical and physical parameters of the photodetector are already defined. Geometrical parameters include the area and the thickness of the active region, i.e., its total volume. Physical parameters are the detector material properties. These include optical properties (complex refractive index, determined by the material type and composition), and electrical ones (donor and acceptor concentration, i.e., the concentrations of majority and minority carriers at a given temperature). 

As an indication of the types of infonnation gleaned from all-electron methods, we focus on one recent approach, the FLAPW method. It has been used to detennine the band stmcture and optical properties over a wide energy range for a variety of crystal stmctures and chemical compositions ranging from elementary metals [ ] to complex oxides [M], layered dichalcogenides [, and nanoporous semiconductors The k p fonnulation has also enabled calculation of the complex band stmcture of the A1 (100) surface... 

Finally, the nature of the crystalline microstmcture, ie, crystal size and morphology and the textural relationship among the crystals and glass, is the key to many mechanical and optical properties, including transparency/opacity, strength and fracture toughness, and machinabiUty. These microstmctures can be quite complex and often are distinct from conventional ceramic microstmctures (6). 

As mentioned earlier, CL is a powerful tool for the characterization of optical properties of wide band-gap materials, such as diamond, for which optical excitation sources are not readily available. In addition, electron-beam excitation of solids may produce much greater carrier generation rates than typical optical excitation. In such cases, CL microscopy and spectroscopy are valuable methods in identifying various impurities, defects, and their complexes, and in providing a powerful means for the analysis of their distribution, with spatial resolution on the order of 1 pm and less. ... 

It should be noted that low-loss spectra are basically connected to optical properties of materials. This is because for small scattering angles the energy-differential cross-section dfj/dF, in other words the intensity of the EEL spectrum measured, is directly proportional to Im -l/ (E,q) [2.171]. Here e = ei + iez is the complex dielectric function, E the energy loss, and q the momentum vector. Owing to the comparison to optics (jqj = 0) the above quoted proportionality is fulfilled if the spectrum has been recorded with a reasonably small collection aperture. When Im -l/ is gathered its real part can be determined, by the Kramers-Kronig transformation, and subsequently such optical quantities as refraction index, absorption coefficient, and reflectivity. 

As shown in Fig. 7, a large increase in optical absorption occurs at higher photon energies above the HOMO-LUMO gap where electric dipole transitions become allowed. Transmission spectra taken in this range (see Fig. 7) confirm the similarity of the optical spectra for solid Ceo and Ceo in solution (decalin) [78], as well as a similarity to electron energy loss spectra shown as the inset to this figure. The optical properties of solid Ceo and C70 have been studied over a wide frequency range [78, 79, 80] and yield the complex refractive index n(cj) = n(cj) + and the optical dielectric function... 

Tantalum and niobium are added, in the form of carbides, to cemented carbide compositions used in the production of cutting tools. Pure oxides are widely used in the optical industiy as additives and deposits, and in organic synthesis processes as catalysts and promoters [12, 13]. Binary and more complex oxide compounds based on tantalum and niobium form a huge family of ferroelectric materials that have high Curie temperatures, high dielectric permittivity, and piezoelectric, pyroelectric and non-linear optical properties [14-17]. Compounds of this class are used in the production of energy transformers, quantum electronics, piezoelectrics, acoustics, and so on. Two of... 

Within the limitations on the physical properties which generally restrict plastics to low precision optics, plastics materials have found wide applications in optical products that range from lights to binders for electroluminescent phosphors to fiber optics and lasers. They represent an easily worked material with a wide range of desirable optical properties in simple to complex shapes. In this review the discussion has been limited to the differences between plastics and optical glass materials and to some of the unique design possibilities that are especially important for plastics. Using the optical arts and the... 

The pace of development has increased with the commercialization of more engineering plastics and high performance plastics that were developed for load-bearing applications, functional products, and products with tailored property distributions. Polycarbonate compact discs, for example, are molded into a very simple shape, but upon characterization reveal a distribution of highly complex optical properties requiring extremely tight dimension and tolerance controls (3,223). 

That magnetic measurements often raise more problems than they solve, is demonstrated for the indicated compound. We prepared a series of [ (C2H5N] i,An(NSC) e compounds (An = Th, U, Np, Pu) with cubic coordination of the actinide ion. We derived a consistent interpretation of the magnetic and optical properties of the uranium and the neptunium compounds (6 ). In the case of Pu we expect an isolated T1 ground state and a first excited state at about 728 cm-1. To our surprise we found a magnetic ground state much more pronounced than in the case of the hexachloro-complex, Fig. 4. 

Schultz H, Lehmann H, Rein M, Hanack M (1991) Phthalocyaninatometal and Related Complexes with Special Electrical and Optical Properties. 74 41-146 Schutte CJH (1971) The Ab-Initio Calculation of Molecular Vibrational Frequencies and Force Constants. 9 213-263... 

The localized-valence halogen-bridged platinum(II)/platinum(IV) complexes (175) are of interest because of their highly anisotropic electrical and optical properties. The complexes are characterized by broad and intense intervalence bands in their electronic spectra.542 Partial oxidation of [PtCl(dien)]Cl with iodine yields the mixed valence species [PtI(dien)][PtI3(dien)]I2,543 but when 4Me-dien is used, the mixed valence compound is only obtained if it is trapped quickly, before isomerization of the meridional platinum(IV) complex to a facial form.544 Although these species nominally have localized valences, the extent of delocalization increases as the bridging halide... 

Many gold(I) complexes are susceptible of having optical properties and consequently in the last few years several reports have dealt with luminescence in gold complexes.34,42,43 It has been shown... 

Again a distorted tetrahedral coordination of Hg is achieved in the l,l-bis(diphenylphos-phino)ferrocene (dppf) complex with Hgl2. Both Hg—P in the dppf chelate ring and terminal Hg—I bonds (averages 256.5 pm and 277.6 pm, respectively) are clearly longer than in the previous examples all angles around Hg are close to the value for a tetrahedron. Nonlinear optical properties of the material have been studied.241... 

Ke B, Green M, Vernon LP, and Garcia AF. 1968. Some optical properties of a carotenoid complex derived from Rhodospirillum Rubrum. Biochimica et Biophysica Acta 162(3) 467 469. 

---