Olefins catalysts for

Use Catalyst for polymerization of olefins, catalyst for hydrogenation of aromatics. 

Acid—Base Chemistry. Acetic acid dissociates in water, pK = 4.76 at 25°C. It is a mild acid which can be used for analysis of bases too weak to detect in water (26). It readily neutralizes the ordinary hydroxides of the alkaU metals and the alkaline earths to form the corresponding acetates. When the cmde material pyroligneous acid is neutralized with limestone or magnesia the commercial acetate of lime or acetate of magnesia is obtained (7). Acetic acid accepts protons only from the strongest acids such as nitric acid and sulfuric acid. Other acids exhibit very powerful, superacid properties in acetic acid solutions and are thus useful catalysts for esterifications of olefins and alcohols (27). Nitrations conducted in acetic acid solvent are effected because of the formation of the nitronium ion, NO Hexamethylenetetramine [100-97-0] may be nitrated in acetic acid solvent to yield the explosive cycl o trim ethyl en etrin itram in e [121 -82-4] also known as cyclonit or RDX. 

The addition of alcohols to form the 3-alkoxypropionates is readily carried out with strongly basic catalyst (25). If the alcohol groups are different, ester interchange gives a mixture of products. Anionic polymerization to oligomeric acrylate esters can be obtained with appropriate control of reaction conditions. The 3-aIkoxypropionates can be cleaved in the presence of acid catalysts to generate acrylates (26). Development of transition-metal catalysts for carbonylation of olefins provides routes to both 3-aIkoxypropionates and 3-acryl-oxypropionates (27,28). Hence these are potential intermediates to acrylates from ethylene and carbon monoxide. 

Rhodium Ca.ta.lysts. Rhodium carbonyl catalysts for olefin hydroformylation are more active than cobalt carbonyls and can be appHed at lower temperatures and pressures (14). Rhodium hydrocarbonyl [75506-18-2] HRh(CO)4, results in lower -butyraldehyde [123-72-8] to isobutyraldehyde [78-84-2] ratios from propylene [115-07-17, C H, than does cobalt hydrocarbonyl, ie, 50/50 vs 80/20. Ligand-modified rhodium catalysts, HRh(CO)2L2 or HRh(CO)L2, afford /iso-ratios as high as 92/8 the ligand is generally a tertiary phosphine. The rhodium catalyst process was developed joindy by Union Carbide Chemicals, Johnson-Matthey, and Davy Powergas and has been Hcensed to several companies. It is particulady suited to propylene conversion to -butyraldehyde for 2-ethylhexanol production in that by-product isobutyraldehyde is minimized. 

Other applications of zirconium tetrafluoride are in molten salt reactor experiments as a catalyst for the fluorination of chloroacetone to chlorofluoroacetone (17,18) as a catalyst for olefin polymerization (19) as a catalyst for the conversion of a mixture of formaldehyde, acetaldehyde, and ammonia (in the ratio of 1 1 3 3) to pyridine (20) as an inhibitor for the combustion of NH CIO (21) in rechargeable electrochemical cells (22) and in dental applications (23) (see Dentalmaterials). 

W. Kaminsky and co-workers, iu W. Kaminsky and H. Sinn, eds.. International Symposium of Transition Metals and Organometallics as Catalysts for Olefin Polymeri tion, Sponger Press, Berlin, 1988, p. 291. 

Future Trends. In addition to the commercialization of newer extraction/ decantation product/catalyst separations technology, there have been advances in the development of high reactivity 0x0 catalysts for the conversion of low reactivity feedstocks such as internal and a-alkyl substituted a-olefins. These catalysts contain (as ligands) ortho-/-butyl or similarly substituted arylphosphites, which combine high reactivity, vastiy improved hydrolytic stabiUty, and resistance to degradation by product aldehyde, which were deficiencies of eadier, unsubstituted phosphites. Diorganophosphites (28), such as stmcture (6), have enhanced stabiUty over similarly substituted triorganophosphites. 

High enantioselectivities and regioselectivities have been obtained using both mono- and 1,2-disubstituted prochinal olefins employing chiral phosphine phosphite (33,34) modified rhodium catalysts. For example, i7j -2-butene ia the presence of rhodium and (12) (33) gave (3)-2-meth5ibutanal ia an optical yield of 82% at a turnover number of 9.84. ... 

All lation of Aromatic Amines and Pyridines. Commercially important aromatic amines are aniline [62-53-3] toluidine [26915-12-8], phenylenediamines [25265-76-3], and toluenediamines [25376-45-8] (see Amines, aromatic). The ortho alkylation of these aromatic amines with olefins, alcohols, and dienes to produce more valuable derivatives can be achieved with soHd acid catalysts. For instance, 5-/ f2 butyl-2,4-toluenediamine (C H gN2), which is used for performance polymer appHcations, is produced at 85% selectivity and 84% 2,4-toluenediamine [95-80-7] (2,4-4L)A)... 

Conventional triorganophosphite ligands, such as triphenylphosphite, form highly active hydroformylation catalysts (95—99) however, they suffer from poor durabiUty because of decomposition. Diorganophosphite-modified rhodium catalysts (94,100,101), have overcome this stabiUty deficiency and provide a low pressure, rhodium catalyzed process for the hydroformylation of low reactivity olefins, thus making lower cost amyl alcohols from butenes readily accessible. The new diorganophosphite-modified rhodium catalysts increase hydroformylation rates by more than 100 times and provide selectivities not available with standard phosphine catalysts. For example, hydroformylation of 2-butene with l,l -biphenyl-2,2 -diyl... 

Uses. The main use for tetraorganotin compounds is as (usually captive) intermediates for the tri-, di-, and monoorganotins. Although there have been reports in the patent Hterature of the use of tetraorganotins as components of Ziegler-Natta-type catalysts for the polymeri2ation of olefins, there is no evidence that such catalysts ate used commercially. 

Titanium Trichloride. Titanium trichloride [7705-07-9] exists in four different soHd polymorphs that have been much studied because of the importance of TiCl as a catalyst for the stereospecific polymerization of olefins (120,124). The a-, y-, and 5-forms are all violet and have close-packed layers of chlorines. The titaniums occupy the octahedral interstices between the layers. The three forms differ in the arrangement of the titaniums among the available octahedral sites. In a-TiCl, the chlorine sheets are hexagonaHy close-packed in y-TiCl, they are cubic close-packed. The brown P-form does not have a layer stmcture but, instead, consists of linear strands of titaniums, where each titanium is coordinated by three chlorines that act as a bridge to the next Ti The stmctural parameters are as follows ... 

The primary use of TiCl is as a catalyst for the polymerisa tion of hydrocarbons (125—129). In particular, the Ziegler-Natta catalysts used to produce stereoregular polymers of several olefins and dienes, eg, polypropylene, are based on a-TiCl and A1(C2H3)3. The mechanism of this reaction has been described (130). SuppHers of titanium trichloride iaclude Akso America and Phillips Petroleum ia the United States, and Mitsubishi ia Japan. 

Titanium—Vanadium Mixed Metal Alkoxides. Titanium—vanadium mixed metal alkoxides, VO(OTi(OR)2)2, are prepared by reaction of titanates, eg, TYZOR TBT, with vanadium acetate ia a high boiling hydrocarbon solvent. The by-product butyl acetate is distilled off to yield a product useful as a catalyst for polymeri2iag olefins, dienes, styrenics, vinyl chloride, acrylate esters, and epoxides (159,160). 

CsH5)2Ti [1271-29-0] Ti(II) Cpj dark green 200 pyrophoric catalyst for polymeti-zation of olefins and acetylenes... 

The exopolyhedral metaHacarborane complex Ti(C2B2QH22)4, which is prepared by the reaction of TiCl and 1-Li-1,2-C2B2QH22, has also been reported to be an active heterogeneous catalyst for the polymerization of olefins when supported on alumina and in the presence of (C2H3)2A1C1 co-catalyst (230). 

Titanium bromide [7789-68-6] TiBr, is claimed as a catalyst for olefin polymerizations (18). Chromous bromide [10049-25-9] CrBr2, is used in chromizing. Chromic bromide [10031-25-1], CrBr, and tungsten bromide [13701 -86-5], are catalysts for polymerizing olefins (19). Manganese... 

A selective poison is one that binds to the catalyst surface in such a way that it blocks the catalytic sites for one kind of reaction but not those for another. Selective poisons are used to control the selectivity of a catalyst. For example, nickel catalysts supported on alumina are used for selective removal of acetjiene impurities in olefin streams (58). The catalyst is treated with a continuous feed stream containing sulfur to poison it to an exacdy controlled degree that does not affect the activity for conversion of acetylene to ethylene but does poison the activity for ethylene hydrogenation to ethane. Thus the acetylene is removed and the valuable olefin is not converted. 

Polymer-supported catalysts incorporating organometaUic complexes also behave in much the same way as their soluble analogues (28). Extensive research has been done in attempts to develop supported rhodium complex catalysts for olefin hydroformylation and methanol carbonylation, but the effort has not been commercially successful. The difficulty is that the polymer-supported catalysts are not sufftciendy stable the valuable metal is continuously leached into the product stream (28). Consequendy, the soHd catalysts fail to eliminate the problems of corrosion and catalyst recovery and recycle that are characteristic of solution catalysis. 

This is an ion-exchanger like the sulfonated polymer. The siUca surface can also be functionalized with phosphine complexes when combined with rhodium, these give anchored complexes that behave like their soluble and polymer-supported analogues as catalysts for olefin hydrogenation and other reactions ... 

These siUca-supported catalysts demonstrate the close connections between catalysis in solutions and catalysis on surfaces, but they are not industrial catalysts. However, siUca is used as a support for chromium complexes, formed either from chromocene or chromium salts, that are industrial catalysts for polymerization of a-olefins (64,65). Supported chromium complex catalysts are used on an enormous scale in the manufacture of linear polyethylene in the Unipol and Phillips processes (see Olefin polymers). The exact stmctures of the surface species are still not known, but it is evident that there is a close analogy linking soluble and supported metal complex catalysts for olefin polymerization. 

---