Nucleophilic displacement aromatic compounds

The Pd—C cr-bond can be prepared from simple, unoxidized alkenes and aromatic compounds by the reaction of Pd(II) compounds. The following are typical examples. The first step of the reaction of a simple alkene with Pd(ll) and a nucleophile X or Y to form 19 is called palladation. Depending on the nucleophile, it is called oxypalladation, aminopalladation, carbopalladation, etc. The subsequent elimination of b-hydrogen produces the nucleophilic substitution product 20. The displacement of Pd with another nucleophile (X) affords the nucleophilic addition product 21 (see Chapter 3, Section 2). As an example, the oxypalladation of 4-pentenol with PdXi to afford furan 22 or 23 is shown. 

I itro-DisplacementPolymerization. The facile nucleophilic displacement of a nitro group on a phthalimide by an oxyanion has been used to prepare polyetherimides by heating bisphenoxides with bisnitrophthalimides (91). For example with 4,4 -dinitro monomers, a polymer with the Ultem backbone is prepared as follows (92). Because of the high reactivity of the nitro phthalimides, the polymerkation can be carried out at temperatures below 75°C. Relative reactivities are nitro compounds over halogens, Ai-aryl imides over A/-alkyl imides, and 3-substituents over 4-substituents. Solvents are usually dipolar aprotic Hquids such as dimethyl sulfoxide, and sometimes an aromatic Hquid is used, in addition. 

It resembles tetracyanoethylene in that it adds reagents such as hydrogen (31), sulfurous acid (31), and tetrahydrofuran (32) to the ends of the conjugated system of carbon atoms suffers displacement of one or two cyano groups by nucleophilic reagents such as amines (33) or sodiomalononittile (34) forms TT-complexes with aromatic compounds (35) and takes an electron from iodide ion, copper, or tertiary amines to form an anion radical (35,36). The anion radical has been isolated as salts of the formula (TCNQ) where is a metal or ammonium cation, and n = 1, 1.5, or 2. Some of these salts have... 

The photolysis of chlorinated aromatic compounds occurs by several processes which follow predictable routes 13). They frequently undergo photochemical loss of chlorine by dissociation of the excited molecule to free radicals or, alternatively, through a nucleophilic displacement reaction with a solvent or substrate molecule. Either mechanism is plausible, and the operation of one or the other may be influenced by the reaction medium and the presence of other reagents. 

Further new competitive AMPA antagonists include the imidazo-fused 23-benzodiazepine derivative 103. This compound showed excellent anticonvulsant activity and other activities indicative of possible therapeutic significance in human stroke and Parkinson k disease <00BMC2127>. An efficient synthesis of fluorine-containing H-1,4-diazepino[6,5-/t]quinolines has been described based on iV,/V-dimethyl-5,7-bis(trifluoroacetyl)-8-quinolylamine and an aromatic nucleophilic displacement with 1,2-ethylenediamine, followed by cyclocondensation <00S1822>. 

Nucleophilic substitution is the widely accepted reaction route for the photosubstitution of aromatic nitro compounds. There are three possible mechanisms11,12, namely (i) direct displacement (S/v2Ar ) (equation 9), (ii) electron transfer from the nucleophile to the excited aromatic substrate (SR wlAr ) (equation 10) and (iii) electron transfer from the excited aromatic compound to an appropriate electron acceptor, followed by attack of the nucleophile on the resultant aromatic radical cation (SRi w 1 Ar ) (equation 11). Substituent effects are important criteria for probing the reaction mechanisms. While the SR wlAr mechanism, which requires no substituent activation, is insensitive to substituent effects, both the S/v2Ar and the Sr+n lAr mechanisms show strong and opposite substituent effects. 

Okamoto and co-workers noted that N-phenylhydroxylamine gave predominately diphenylamine on treatment with benzene in TFA but mostly 4-aminobiphenyl and 2-aminobiphenyl in the stronger acid trifluoromethane-sulfonic acid (TFSA). Similar results were obtained if benzene was replaced by toluene or anisole. The authors suggested that the reaction in TFA proceeded through O-protonated hydroxylamine either via a direct Sn2 displacement on N by the aromatic nucleophile or via attack of the aromatic compound on the N of a nitrenium ion. In TFSA they favored a mechanism in which the diprotonated hydroxylamine lost water to generate an iminium-benzenium dication (11, Scheme 5), a protonated nitrenium ion. " This... 

An alternate and more controlled approach to the synthesis of phenothiazines involves sequential aromatic nucleophilic displacement reactions. This alternate scheme avoids the formation of the isomeric products that are sometimes observed to form from the sulfuration reaction when using substituted aryl rings. The first step in this sequence consists of the displacement of the activated chlorine in nitrobenzene (30-1) by the salt from orf/io-bromothiophenol (30-2) to give the thioether (30-3). The nitro group is then reduced to form aniline (30-4). Heating that compound in a solvent such as DMF leads to the internal displacement of bromine by amino nitrogen and the formation of the chlorophenothiazine (30-4). Alkylation of the anion from that intermediate with 3-chloro-l-dimethylaminopropane affords chlorpromazine (30-5) [31]. 

Nucleophilic substitutions of simple aromatic compounds which formally involve a hydride displacement are difficult to achieve because of the poor leaving group and the high electron density of the aromatic nucleus which repels approach of a nucleophile. However, rc-electron deficient aromatic compounds such as metal carbonyl complexes are susceptible to attack by certain carbon nucleophiles. Studies of this chemistry have shown [16] an opposite jegioselectivity to the corresponding electrophilic substitutions, in agreement with the polarity alternation rule. 

The first report of the successful synthesis of high molecular weight PAEH by aromatic nucleophilic displacement reaction appears to be from the reaction of 2,5-di(4-fluorophenyl)-l,3,4-oxadiazole and 2,2-di(4-hydroxyphenyl)propane (bisphenol A) [1]. A polymer with a relative viscosity of 0.50 dL/g and a Tg of 180°C was obtained. The 1,3,4-oxadiazole unit activates the fluoro group sufficiently to allow displacement by the bisphenolate. The corresponding dichloro compound gave low molecular weight polymer. Another PAEH with a Tg of 180 °C and a crystalline melt temperature (Tm) of 250 °C was prepared from the reaction of 3,6-dichloropyridazine with bisphenol A [1]. 

The reaction of bis(4-hydroxyphenyl)pyrazoles with activated aromatic difluoro and dichloro compounds under aromatic nucleophilic displacement conditions... 

The nucleophilic displacement of halogens in aromatic compounds by fluorine is aided by utilizing an appropriate catalyst. Polymer-supported aminopyridinium salts have been found to be versatile catalysts for the synthesis of aryl fluorides. The advantage of the catalyst is that it can be recycled and used again. l-Chloro-4-nitrobenzene (3) is converted to l-fluoro-4-nitrobenzene (4) in 71 % isolated yield using this method. The catalyst used has the structure 5.91... 

Analogous to aromatic halides, heterocyclic halides can be transformed to the corresponding fluorides by nucleophilic displacement with fluoride ions. Fluorinated heterocyclic compounds are also biologically interesting and several technical applications are also known.116... 

The facile nucleophilic displacement of a 4-methoxy group from pyrylium salts provides syntheses of 4-substituted pyrans. In the presence of triethylamine, 4-methoxypyrylium salts react with aromatic nitro compounds to give 4-benzylidene-4//-pyrans (73JOC2834). 

As a variation on the base-catalyzed nucleophilic displacement chemistry described, polysulfones and other polyarylethers have been prepared by cuprous chloride-catalyzed polycondensation of aromatic dihydroxy compounds with aromatic dibromo compounds. The advantage of this route is that it does not require that the aromatic dibromo compound be activated by an electron-withdrawing group such as the sulfone group. Details of this polymerization method, known as the UUmann synthesis, have been described (8). 

A nucleophilic mechanism can be applied in reductions with complex hydrides of highly fluori-nated aliphatic and alicyclic fluoroalkenes with electron-deficient C = C bonds the hydride anion adds as a strong nucleophilic agent to the more electrophilic carbon atom the intermediate anion can then lose a fluoride ion either from the original C = C bond, or from the allylic position finishing an SN2 displacement of the fluorine. Thus, the reductions of vinylic C-F bonds with hydrides proceed by a nucleophilic addition-elimination mechanism. Displacement of fluorine in highly fluorinated aromatic compounds proceeds by the same mechanism ... 

The selective nucleophilic displacement of one ortho nitro group from 2,4,6-trinitrotoluene by esters of mercap-toacetic acid followed by oxidation leads to 2-(alkoxycarbonyl)methylsulfonyl compounds. These sulfones react with aromatic aldehydes under Knoevenagel conditions to produce thiochroman 1,1-dioxides 477, probably via a stilbene and a subsequent intramolecular Michael addition. Activating groups other than nitro are compatible with the route (Scheme 167) <2003RJ0397>. 

---