Nucleophiles thiophene

A second example of the synthetic utility of this chemistry is the enantiose-lective synthesis of (+)-cetidil (16) described in Eq. (7) [20]. The key C-H insertion step between the thienyldiazoacetate 14 and 1,4-cyclohexadiene to form 15 demonstrates the potentially wide scope of this chemistry because it is compatible with an alkyl halide functionality and a nucleophilic thiophene ring. 

Several tricyclic monomers required for oxidative (electrochemical or chemical) polymerization have been prepared by coupling reactions. Thus, l,4-diiodo-2,5-dimethylbenzene was coupled with 2-thienylmagnesium bromide in the presence of nickel(II) bis(diphenylphosphino)propane dibromide (NidpppBr2). However when methoxy groups were present in the benzene ring ortho to the site of coupling, the decreased electrophilicity necessitated the use of a more nucleophilic thiophene derivative, 2-thienylcopper (Equation (60)). 

A comparison between pivalate-mediated conditions and silver conditions revealed the preference of nucleophilic thiophenes for silver conditions, whereas acidic thiophenes favored pivalate conditions (eq 17). 

Pyrrole, furan or thiophene do not react with nucleophilic reagents by substitution or addition but only by proton transfer. However, it should be noted that protonated pyrroles are susceptible to nucleophilic attack (see Section 3.02.2.4.5). 

In many cases, substituents linked to a pyrrole, furan or thiophene ring show similar reactivity to those linked to a benzenoid nucleus. This generalization is not true for amino or hydroxyl groups. Hydroxy compounds exist largely, or entirely, in an alternative nonaromatic tautomeric form. Derivatives of this type show little resemblance in their reactions to anilines or phenols. Thienyl- and especially pyrryl- and furyl-methyl halides show enhanced reactivity compared with benzyl halides because the halogen is made more labile by electron release of the type shown below. Hydroxymethyl and aminomethyl groups on heteroaromatic nuclei are activated to nucleophilic attack by a similar effect. 

The dianions derived from furan- and thiophene-carboxylic acids by deprotonation with LDA have been reacted with various electrophiles (Scheme 64). The oxygen dianions reacted efficiently with aldehydes and ketones but not so efficiently with alkyl halides or epoxides. The sulfur dianions reacted with allyl bromide, a reaction which failed in the case of the dianions derived from furancarboxylic acids, and are therefore judged to be the softer nucleophiles (81JCS(Pl)1125,80TL505l). 

Rates of debromination of bromonitro-thiophenes and -selenophenes with sodium thio-phenoxide and sodium selenophenoxide have been studied. Selenophene compounds were about four times more reactive than the corresponding thiophene derivatives. The rate ratio was not significantly different whether attack was occurring at the a- or /3-position. As in benzenoid chemistry, numerous nucleophilic displacement reactions are found to be copper catalyzed. Illustrative of these reactions is the displacement of bromide from 3-bromothiophene-2-carboxylic acid and 3-bromothiophene-4-carboxylic acid by active methylene compounds (e.g. AcCH2C02Et) in the presence of copper and sodium ethoxide (Scheme 77) (75JCS(P1)1390). 

The rearrangement of thiophenes to the isomeric pyrroles has proven synthetically useful (Schemes 98a and 98b). In the absence of a suitable internal nucleophilic nitrogen, so-called degenerate ring transformations may occur (Schemes 98c and 98d). 

Isothiazoles and isothiazolium cations are attacked by carbanions at sulfur and on recyclization can give thiophenes, illustrated by (147) -> (148). 2-Alkyl-3-isothiazolinones e.g. 149) are also vulnerable to nucleophilic attack at sulfur (72AHC 14)1). 

Phenanthro[l,2-d][l,2,3]selenadiazole, 10,11 dihydro- H NMR, 6, 348 synthesis, 6, 353 Phenanthro[b]thiophenes synthesis, 4, 914 Phenanthro[4,5-bcd]thiophenes synthesis, 4, 883, 907, 914 Phenanthro[9,10-ej[l, 2,4]triazines synthesis, 3, 434 Phenarsazin synthesis, 1, 561 Phenazine dyes, 3, 196-197 nitration, 3, 177 UV Spectra, 2, 127 Phenazine, 3-amino-2-hydroxy-in colour photography, 1, 374 Phenazine, 1-chloro-nucleophilic substitution, 3, 164-165 5-oxide... 

The Paal synthesis of thiophenes from 1,4-diketones, 4-ketoaldehydes and 1,4-dialdehydes has found great use in the synthesis of medicinally active compounds, polymers, liquid crystals and other important materials. Furthermore, the discovery of the catalyzed nucleophilic 1,4-conjugate addition of aldehydes, known as the Stetter reaction (Eq. 5.4.1), has enabled widespread use of the Paal thiophene synthesis, by providing 1,4-diketones from readily available starting materials. ... 

An interesting application of the Paal thiophene synthesis was documented for the synthesis of a polystyrene-oligothiophene-polystyrene copolymer. In the Stetter reaction of aldehyde 13 and P-dimethylaminoketone 14, in situ generation of the a,p-unsaturated ketone preceded nucleophilic 1,4-conjugate addition by the acyl anion... 

The mechanism for the redistribution in oxidation states begins similarly to that of the Paal thiophene synthesis. However, upon formation of dithione 38, nucleophilic addition of one thiocarbonyl into the other produces the intermediate zwitterion 39. A 1,3-tautomerization of hydrogen then gives... 

Campaigne et al. have used 3-thenyl bromide obtained by benzoyl peroxide-catalyzed, side-chain bromination of 3-methylthiophene with A -bromosuccinimide, as a starting material for 3-substituted thiophenes. - 22 3-Methylthiophene is now prepared commercially from itaconic acid. The reactive halogen in 3-thenyl bromide could be directly reacted with a variety of nucleophiles, such as cyanide, or malonate, to give more complex 3-substituted compounds. 3-Thenyl bromide was converted by the Sommelet reaction to 3-thio-phenealdehyde which, with silver oxide, was oxidized to 3-thio-... 

The halogens of halothiophenes are more labile than those of the corresponding benzenes in accordance with theoretical considera-tions which indicate that thiophenes should also undergo nucleophilic substitutions more rapidly than benzenes. Hurd and Kreuz" found that in qualitative experiments 3,5-dinitro-2-chlorothiophene was more reactive toward piperidine and methanolic potassium hydroxide than 2,4-dinitrochlorobenzene. A quantitative study on the reaction of the six isomeric bromonitrothiophenes with piperidine (Table V) shows that the thiophenes react about one thousand times... 

Nucleophilic substitution has been used for the preparation of many thiophenes. For instance, 2-phenylthio-3,4-dinitro-5-piperidino-thiophene (155) has been prepared " through stepwise reaction of (150) with different nucleophiles. Nitrothienols and derivatives of them have been obtained from halogenated nitrothiophenes. " Allyl ethers have been prepared by the reaction of 5-chJoro-4-nitro-2-acetylthiophene, 3-nitro-2-chlorothiophene, and 2-nitro-3-bromothio-... 

Metalation of Thiophenes with Organolithium Compounds (Nucleophilic Substitution on Hydrogen)... 

The most favorable coordination sites in thiophenes are the C2C3 and C4C5 double bonds ( -coordination, 38). This type of coordination greatly enhances the nucleophilic power of the sulfur atom, which then gives rise to two new modes of binding the metal atoms, as in the V, S-p.2-, 42, and V, S-p.3-species, 43. 

Complexes 79 show several types of chemical reactions (87CCR229). Nucleophilic addition may proceed at the C2 and S atoms. In excess potassium cyanide, 79 (R = R = R" = R = H) forms mainly the allyl sulfide complex 82 (R = H, Nu = CN) (84JA2901). The reaction of sodium methylate, phenyl-, and 2-thienyllithium with 79 (R = R = r" = R = H) follows the same route. The fragment consisting of three coplanar carbon atoms is described as the allyl system over which the Tr-electron density is delocalized. The sulfur atom may participate in delocalization to some extent. Complex 82 (R = H, Nu = CN) may be proto-nated by hydrochloric acid to yield the product where the 2-cyanothiophene has been converted into 2,3-dihydro-2-cyanothiophene. The initial thiophene complex 79 (R = R = r" = R = H) reacts reversibly with tri-n-butylphosphine followed by the formation of 82 [R = H, Nu = P(n-Bu)3]. Less basic phosphines, such as methyldiphenylphosphine, add with much greater difficulty. The reaction of 79 (r2 = r3 = r4 = r5 = h) with the hydride anion [BH4, HFe(CO)4, HW(CO)J] followed by the formation of 82 (R = Nu, H) has also been studied in detail. When the hydride anion originates from HFe(CO)4, the process is complicated by the formation of side products 83 and 84. The 2-methylthiophene complex 79... 

R" = H, R = H) gives similar butadienethiolate complexes. Tr-Complexation of thiophene in compounds of the type 123 activates the heterocycle relative toward other nucleophiles, such as OMe , SMe , SEt , S(i-Pr) , andCH(COOMe)2. The products 127 include the ring-opened butadiene-thiolate framework. 

Cases of the S-coordinated rhodium and iridium are quite scarce. To complete the picture, we next consider the possibilities of S-coordination using complicated derivatives of thiophene. 2,5-[Bis(2-diphenylphosphino)ethyl]thiophene is known to contain three potential donor sites, two phosphorus atoms and the sulfur heteroatom, the latter being a rather nucleophilic center (93IC5652). A more typical situation is coordination via the phosphorus sites. It is also observed in the product of the reaction of 2,5-bis[3-(diphenylphosphino)propyl]thiophene (L) with the species obtained after treatment of [(cod)Rh(acac)] with perchloric acid (95IC365). Carbonylation of [Rh(cod)L][C104]) thus prepared yields 237. Decarbonylation of 237 gives a mixture of 238 and the S-coordinated species 239. Complete decarbonylation gives 240, where the heterocycle is -coordinated. The cycle of carbonylation decarbonylation is reversible. 

Friedel-Crafts acylation of fluorobenzene with thiophene-l-carboxylic acid gives the ketone 7. Nitration proceeds ortho to the fluoro group to give the intermediate Nucleophilic displacement by means of... 

Millan and coworkers (99-101) also studied the effect of tacticity on the nucleophilic substitution reactions of PVC. Sodium thiophenate and phenol were used for these reactions. The central chlorine in isotactic triads and, to a lesser extent, in heterotactic triads was found to be most reactive. It was concluded that initiation of degradation may occur by normal structures, and polyene build-up may be favored by syndiotic sequence. This... 

---