Heterogeneous nucleation method

Three types of rate equations are shown here. These rate equations ean be used for quite complieated reactions, but a specific method or measurement approach is needed. How we do this is critical to determining accurate estimation of the progress of a solid state reaction. We will discuss suitable methods in another chapter. We now return to the subject of nucleation so that we can apply the rate equations given above to specific cases. First, we examine heterogeneous processes. 

Generally speaking, homogeneous nucleation needs the supersaturation level higher than heterogeneous one. In the system consisting of support solid and metal salt solution, the nucleation occurs on the surfaces of the solid. The selective reductive deposition is performed by the adsorption of metal ion or complexes on the surfaces and hereby the reduction. Namely, the initial adsorption of metal ions or complexes is the key point of this technique. Hence, key points of this method are... 

Confinement effects may also be employed to characterize the nucleation and growth of porous materials [211]. The underlying mechanisms of self-assembly and crystallization of these complex heterogeneous systems may be traced by solid state NMR methods well before their detection by diffraction methods. 

The data for the isothermal crystallization of [IX-Cg] from the glassy state were analyzed by the same method as that for the polyethers. Avrami s index obtained was between 2.1 and 2.2, i.e., n = ca. 2. This value, n = 2, suggests that the crystals grow two-dimensionally, if the nucleation process is heterogeneous and the growth process is diffusion-controlled. 

The class of methods used for preparing colloidal dispersions in which precipitation from either solution or chemical reaction is used to create colloidal species. The colloidal species are built up by deposition on nuclei that may be of the same or different chemical species. If the nuclei are of the same chemical species, the process is referred to as homogeneous nucleation if the nuclei are of different chemical species, the process is referred to as heterogeneous nucleation. See also Dispersion Methods. An empirical or qualitative term referring to the relative ease with which a material can be deformed or made to flow. It is a reflection of the cohesive and adhesive forces in a mixture or dispersion. See also Atterberg Limits. 

Formation of metal clusters by gas aggregation, in which metal atoms are evaporated or sputtered into a cooled inert gas flow at relatively high pressure, has been well established in last decade. By repeated collisions with the carrier gas, the supersaturated metal vapor nucleates and forms clusters. The mechanism of cluster formation can be explained with homogeneous and heterogeneous nucleation theories. The gas aggregation methods have been applied extensively to produce small clusters of metals such as zinc, copper, silver etc. [23-26]. In some cases this method was used in combination with a mass filter such as a quadruple or a time-of-flight spectrometer [27, 28], The metal vapor for cluster source can be produced by either thermal evaporation [23-28] or sputter discharge [22, 29]. 

A popular method for the synthesis of metal nanowires is the use of the polyol process,lal wherein the metal salt Is reduced in the presence of PVP to yield nanowires of the desired metal. For example, Ag nanowires have been rapidly synthesized using a microwave-assisted polyol method.161 CoNi nanowires are obtained by heterogeneous nucleation in liquid polyol.162 While Bi nanowires have been prepared employing NaBiO, as the bismuth source.161 Pd nanobars are synthesized by varying the type and concentration of reducing agent as well as reaction temperature.1 ... 

The various latexes were characterized with respect to particle size and size distribution, surface charge and functional group density, and electrophoretic mobility behavior. As observed by transmission electron microscopy all latexes were found highly monodisperse with a uniformity ratio between 1.001 and 1.010, a property due to the short duration of the nucleation period involved in the various radical-initiated heterogeneous polymerization processes. The surface charge density was determined by a colorimetric titration method reported elsewhere [13]. 

---