Nitroxide-mediated Polymerization NMP

The ability of stable nitroxide radicals to react with carbon-centered radicals and to act as radical inhibitors was already known at the beginning of the 1980s [54], when Solomon and co-workers showed that the reversible reaction of nitroxides with growing polymer chains can be used to produce low-DP polymers [55]. But it is only in the 1990s with the work of Georges and co-workers [56, 57] that this novel polymerization technique, and in general LRP, received the attention they deserved. 

This living mechanism [Eq. (a)] consists of the reversible combination of the growing radical chains, and the so-called persistent radical species , X (the nitroxide radical group), to form dormant polymer chains, J X  

many different routes are known which use different persistent radicals [54-58]. Among these, TEMPO is by far the most widely used, even though it suffers very limited applicability to monomers unlike styrene, and requires high operating temperatures (about 120-140°C). More recent studies were aimed to reduce the operating temperature and to broaden the monomer applicability so as to enlarge the spectrum of block copolymers accessible by this technique [58]. Despite these efforts, the range of application remains quite limited. 

---

The first steps towards living radical polymerization were laken by Otsu and colleagues283 in 1982. In 1985, this was taken one step further with the development by Solomon et al.l0 of nitroxide-mediated polymerization (NMP). This work was first reported in the patent literature30 and in conference papers but was not widely recognized until 1993 when Georges et aL, applied the method in... 

The literature on Nitroxide-Mediated Polymerization (NMP) through 2001 was reviewed by Hawker el al. vu 7 More recently the subject has been reviewed by Sluder and Schulte10 and Solomon.109 NMP is also discussed by Fischer110 and Goto and Fukuda" in their reviews of the kinetics of living radical polymerization and is mentioned in most reviews on living radical polymerization. A simplified mechanism of NMP is shown in Scheme 9.17. 

The tendency of nitrones to react with radicals has been widely used in new synthetic routes to well-defined polymers with low polydispersity. The recent progress in controlled radical polymerization (CRP), mainly nitroxide-mediated polymerization (NMP) (695), is based on the direct transformation of nitrones to nitroxides and alkoxyamines in the polymerization medium (696, 697). In polymer chemistry, NMP has become popular as a method for preparing living polymers (698) under mild, chemoselective conditions with good control over both, the polydispersity and molecular weight. 

Scheme 3 Schematic representation of the nitroxide mediated polymerization (NMP) of styrene (St)...

Various stable radicals such as nitroxide, triazolinyl, trityl, and dithiocarbamate have been used as the mediating or persistent radical (deactivator) for SFRP. Nitroxides are generally more efficient than the others. Cyclic nitroxide radicals such as 2,2,6,6-tetramethyl-l-piper-idinoxyl (TEMPO) have been extensively studied. SFRP with nitroxides is called nitroxide-mediated polymerization (NMP). Polymerization is carried out by two methods that parallel those used in ATRP [Bertin et al., 1998 Georges, 1993 Flawker, 1997 Flawker et al., 2001], One method involves the thermal decomposition of an alkoxyamine such as... 

Nitroxide mediated polymerization (NMP) [56, 57]. This consists in a thermally reversible termination reaction by a homolytic cleavage of a C-ON bond of an alkoxyamine, giving rise to an initiating alkyl radical (active species) and a nitroxyl radical, which brings control to the reaction [58]. 

Nitroxide mediated polymerization (NMP) is another type of controlled radical polymerization technique used to synthesize polymer hybrids. It relies on the reversible trapping of growing macro-radicals by nitroxide to form dormant species in which the C-ON covalent bond is thermally cleavaged (Fig. 19). At a polymerization temperature, the equilibrium between dormant and active species is strongly shifted to the dormant side, which Emits the irreversible chain termination reaction. 

The controlled emulsion polymerization of styrene using nitroxide-mediated polymerization (NMP), reversible addition-fragmentation transfer polymerization (RAFT), stable free radical polymerization (SFR), and atom transfer radical polymerization (ATRP) methods is described. The chain transfer agent associated with each process was phenyl-t-butylnitrone, nitric oxide, dibenzyl trithiocarbonate, 1,1-diphenylethylene, and ethyl 2-bromo-isobutyrate, respectively. Polydispersities between 1.17 and 1.80 were observed. 

The fifty chapters submitted for publication in the ACS Symposium series could not fit into one volume and therefore we decided to split them into two volumes. In order to balance the size of each volume we did not divide the chapters into volumes related to mechanisms and materials but rather to those related to atom transfer radical polymerization (ATRP) and to other controlled/living radical polymerization methods reversible-addition fragmentation transfer (RAFT) and other degenerative transfer techniques, as well as stable free radical pol5mierizations (SFRP) including nitroxide mediated polymerization (NMP) and organometallic mediated radical polymerization (OMRP). 

Controlled/ Living radical polymerization (CRP) of vinyl acetate (VAc) via nitroxide-mediated polymerization (NMP), organocobalt-mediated polymerization, iodine degenerative transfer polymerization (DT), reversible radical addition-fragmentation chain transfer polymerization (RAFT), and atom transfer radical polymerization (ATRP) is summarized and compared with the ATRP of VAc catalyzed by copper halide/2,2 6 ,2 -terpyridine. The new copper catalyst provides the first example of ATRP of VAc with clear mechanism and the facile synthesis of poly(vinyl acetate) and its block copolymers. 

Controlled Radical Polymerization (CRP) is the most recently developed polymerization technology for the preparation of well defined functional materials. Three recently developed CRP processes are based upon forming a dynamic equilibrium between active and dormant species that provides a slower more controlled chain growth than conventional radical polymerization. Nitroxide Mediated Polymerization (NMP), Atom Transfer Radical Polymerization (ATRP) and Reversible Addition Fragmentation Transfer (RAFT) have been developed, and improved, over the past two decades, to provide control over radical polymerization processes. This chapter discusses the patents issued on ATRP initiation procedures, new functional materials prepared by CRP, and discusses recent improvements in all three CRP processes. However the ultimate measure of success for any CRP system is the preparation of conunercially viable products using acceptable economical manufacturing procedures. 

The literature on Nitroxide-Mediated Polymerization (NMP) through 2001 was reviewed by Hawker et More recently the subject has been reviewed... 

Attaching initiators onto the silica surfaces allows controlled radical polymerization, either nitroxide mediated polymerization (NMP) [109] or ATRP [110] resulting in core-shell particles. 

Besides the ATRP method, other controlled radical polymerization techniques such as reversible addition/fragmentation chain transfer polymerization (RAFT) (Zhang et al., 2007) and nitroxide-mediated polymerization (NMP) (Yoshida and Ohta, 2005), have also been explored to synthesize azo BCs. 

---