Nickel characteristics

A Materials Analysis Company electron beam microprobe was used for the analysis of nickel. Characteristic radiation emitted by the nickel in the specimen was resolved by a properly positioned lithium fluoride crystal and the intensity was measured with a proportional detector. A motor-driven gear mechanism moved the sample in a step-wise fashion relative to the electron beam. Integrated counts were taken at various intervals along the radius of an oxidized nickel sphere and into the glass sufficient to give a smooth curve for the concentration as a function of distance. The electron beam diameter was 1 ji and the depth of penetration was a maximum of 3 fi. These values are small compared with the 100 // oxidized nickel particle size. The electron beam microprobe was equipped to take photographs of the X-ray image for any element from an oscilloscope. In order to minimize the... 

Density is a particularly important characteristic of alloys used in rotating machinery, because centrifugal stresses increase with density. Densities of the various metals in Table 1 range from 6.1 to 19.3 g/cm. Those of iron, nickel, and cobalt-base superaHoys fall in the range 7-8.5 g/cm. Those alloys which contain the heavier elements, ie, molybdenum, tantalum, or tungsten, have correspondingly high densities. 

The highly aHoyed austenitic stainless steels are proprietary modifications of the standard AISI 316 stainless steel. These have higher creep—mpture strengths than the standard steels, yet retain the good corrosion resistance and forming characteristics of the standard austenitic stainless steels. Nickel-Base Superalloys. 

A third group includes silver—nickel, silver—cadmium oxide, and silver—graphite combinations. These materials are characterized by low contact resistance, some resistance to arc erosion, and excellent non sticking characteristics. They can be considered intermediate in overall properties between silver alloys and silver or copper—refractory compositions. Silver—cadmium oxide compositions, the most popular of this class, have wide appHcation in aircraft relays, motor controllers, and line starters and controls. 

Many types of stainless steels are available. The type most widely used in the dairy industry is 18—8 (18% chromium, 8% nickel plus iron). Small amounts of siHcon, molybdenum, manganese, carbon, sulfur, and phosphoms maybe included to obtain characteristics desired for specific appHcations. 

The treatments used to recover nickel from its sulfide and lateritic ores differ considerably because of the differing physical characteristics of the two ore types. The sulfide ores, in which the nickel, iron, and copper occur in a physical mixture as distinct minerals, are amenable to initial concentration by mechanical methods, eg, flotation (qv) and magnetic separation (see SEPARATION,MAGNETIC). The lateritic ores are not susceptible to these physical processes of beneficiation, and chemical means must be used to extract the nickel. The nickel concentration processes that have been developed are not as effective for the lateritic ores as for the sulfide ores (see also Metallurgy, extractive Minerals recovery and processing). 

High-Temperature Characteristics of Stainless Steels, Mmerican Iron and Steel Institute, Nickel Development Institute, Toronto, Ontario, Canada, 1993. 

The available surface area of the catalyst gready affects the rate of a hydrogenation reaction. The surface area is dependent on both the amount of catalyst used and the surface characteristics of the catalyst. Generally, a large surface area is desired to minimize the amount of catalyst needed. This can be accomphshed by using either a catalyst with a small particle size or one with a porous surface. Catalysts with a small particle size, however, can be difficult to recover from the material being reduced. Therefore, larger particle size catalyst with a porous surface is often preferred. A common example of such a catalyst is Raney nickel. 

Selenium is added up to 0.1% to silicon steels (2—4% Si) used in transformer cores to enhance the development of the secondary recrystallization texture which, in turn, improves the magnetic characteristics. Selenium alloying additions to the melt may be made as elemental Se, nickel—selenium, or ferroselenium. The recovery depends on the melting practice and method of addition. Normally, it is in the range of 66%, but may be as high as 90%. 

Alloying elements such as nickel, chromium, molybdenum, and copper, which may be introduced with scrap, can increase the hardenability, although only slightly, because the concentrations are ordinarily low. However, the heat-treating characteristics may change, and for appHcations in which ductihty is important, as in low carbon steels for deep drawing, the increased hardness and lower ductiHty imparted by these elements may be harmful. 

The thermistor material is usually a metal oxide, eg, manganese oxide. Dopants, eg, nickel oxide or copper oxide, may be added to obtain a variety of resistance and slope characteristics. The material is usually skitered kito a disk or bead with kitegral or attached connecting wkes. Figure 4 shows a typical series of steps ki the production of a disk thermistor. 

Fig. 10. Power and voltage characteristics of the nickel—iron cell where the internal resistance of the cell, R, is 0.70 mQ, at various states of discharge ( )...

---