Recrystallization secondary

The mineralogy of CAIs is commonly described in terms of what might be called primary and secondary minerals. Although useful, these terms are relative and potentially misleading. Primary refers to a phase that apparently formed when the inclusion itself first formed, for example, by direct condensation, melt solidification, or solid-state recrystallization. Secondary is a petrographic term for any phase that texturally appears to be replacing another phase e.g., one that not only mantles... 

The melting behavior of miscible crystallizable blends (section 3.3.5) is often complex, revealing multiple DSC endotherms, which can be ascribed to several causes such as recrystallization, secondary crystallization, liquid-liquid phase separation (3.3.6), etc. 

The melting behavior of binary crystallizable blends often reveals multiple melting endotherms, that can be ascribed to recrystallization, secondary crystallization effects, phase separation, etc. 

Selenium is added up to 0.1% to silicon steels (2—4% Si) used in transformer cores to enhance the development of the secondary recrystallization texture which, in turn, improves the magnetic characteristics. Selenium alloying additions to the melt may be made as elemental Se, nickel—selenium, or ferroselenium. The recovery depends on the melting practice and method of addition. Normally, it is in the range of 66%, but may be as high as 90%. 

The nitrites aie most conveniently prepared from the corresponding alcohols by treatment with nitrosyl chloride in pyridine. The crude nitrites can be precipitated by addition of water and recrystallized from appropriate solvents. However nitrites prepared from carbinols in which the adjacent carbon is substituted by halogen, free or esterified hydroxyl or a carbonyl function are very readily hydrolyzed and must be recrystallized with great care. In general the photolysis gives higher yields if purified and dried nitrites are used which do not contain acids or pyridine, although occasionally the addition of small amounts of pyridine is recommended in order to prevent hydrolysis of the nitrite. Traces of acids do in fact catalyze the thermal decomposition of secondary nitrites to equimolar amounts of alcohol and ketone. ... 

Condensation of piperazine with 2-methoxytropone gives the addition-elimination product 12 [2]. Alkylation of the remaining secondary amino group with bromoketone 13, itself the product from acylation of dimethyl catechol, gives aminoketone 14. Reduction of the carbonyl group with sodium borohydride leads to secondaiy alcohols 15 and 16. Resolution of these two enantiomers was achieved by recrystallization of their tartrate salts to give ciladopa (16) [3],... 

P-Chirogenic diphosphine 19, which rhodium-chelate complex forms a seven-membered ring (rare case for P-stereogenic ligand), was also prepared in reasonable yield (68%) using the wide chemistry of secondary phosphine borane [37]. Deprotonation of the enantiomerically enriched ferf-butylmethylphos-phine-borane 88 (Scheme 15) followed by quenching with a,a -dichloro-o-xylene and recrystallization afforded optically active diphosphine-borane 89 (precursor of free phosphine 19). 

Figure 3.4 Schematic representation of the most commonly employed secondary reference, the saturated calomel electrode, (SCE). Care is needed when using this electrode to ensure that the sinter does not become blocked with recrystallized KCl - a common problem.

Site of the. acidic surface oxides. The question whether the acidic surface oxides are bound to the periphery of the carbon layei-s or to the basal planes of the crystallites could be resolved by oxidation of a graphitized carbon black (46). The particles of carbon black are, at first approximation, spherical. The graphite-like crystallites show such preferential orientation that their c axis are aligned in a radial direction (64, 65). A schematic representation of this secondary structure is given in Fig. 1. On recrystallization between 2000 and 3000°, many small... 

---