Barrier properties nanocomposites

The arrangement of the layers themselves also has an impact. The self-extinguishing properties of these materials, for instance, have been described qualitatively. A protective char layer forms and acts as a diffusion barrier to further combustion. Likewise, before the advents of nanocomposites, models of the barrier properties of glass-ribbon reinforced composites foreshadowed the increased tortuosity arguments often heard with regard to nanocomposite barrier properties. Improvements on these first approximations of bar-... 

Comparison of experimental observations with barrier model predictions clearly indicated that increase of clay content has an impact on effective clay aspect ratio and alignment, which in turn affect the nanocomposite barrier properties. At the same time, the barrier models could serve as indirect tools for quantification of the degree of exfo-liation/intercalation/aggregation in the production nanocomposite prodncts. 

Dunkerley Erik J, Schmidt Daniel F. Expanding the range of nanocomposite barrier properties measurement and modeling. In MRS fall meeting exhibit, November 28-December 2, 2011, Boston, Massachusetts 2011. 

Nanocomposite based on polyurethane (PU) is prepared using silica, clay, and Polyhedral Oligomeric Silsesquioxane (POSS). Preparation, characterization, mechanical and barrier properties, morphology, and effect of processing conditions have been reported on polyurethane-based nanocomposites [72,73]. 

Nanocomposites have been prepared with this polymer and mechanical and barrier properties and ffacmre behavior have been studied [74—76]. The latex of this mbber has also been used for the same [77]. Sadhu and Bhowmick [78-81] have studied the preparation, stmcmre, and various... 

This is a highly polar polymer and crystalline due to the presence of amide linkages. To achieve effective intercalation and exfoliation, the nanoclay has to be modified with some functional polar group. Most commonly, amino acid treatment is done for the nanoclays. Nanocomposites have been prepared using in situ polymerization [85] and melt-intercalation methods [113-117]. Crystallization behavior [118-122], mechanical [123,124], thermal, and barrier properties, and kinetic study [125,126] have been carried out. Nylon-based nanocomposites are now being produced commercially. 

PP is probably the most thoroughly investigated system in the nanocomposite field next to nylon [127-132]. In most of the cases isotactic/syndiotactic-PP-based nanocomposites have been prepared with various clays using maleic anhydride as the compatibilizer. Sometimes maleic anhydride-grafted PP has also been used [127]. Nanocomposites have shown dramatic improvement over the pristine polymer in mechanical, rheological, thermal, and barrier properties [132-138]. Crystallization [139,140], thermodynamic behavior, and kinetic study [141] have also been done. 

Owing to the good barrier property, the EVA-based clay nanocomposites are used for packaging, bottle-making, etc. [168]. 

It is likely that excellent gas barrier properties exhibited by nanocomposite polymer systems will result in their substantial use as packaging materials in fumre years. 

Rubber-clay nanocomposites are particularly attractive for potential applications where enhanced barrier properties are desired. Organoclays for rubber intercalation were prepared... 

Polyimide-clay nanocomposites constitute another example of the synthesis of nanocomposite from polymer solution [70-76]. Polyimide-clay nanocomposite films were produced via polymerization of 4,4 -diaminodiphenyl ether and pyromellitic dianhydride in dimethylacetamide (DMAC) solvent, followed by mixing of the poly(amic acid) solution with organoclay dispersed in DMAC. Synthetic mica and MMT produced primarily exfoliated nanocomposites, while saponite and hectorite led to only monolayer intercalation in the clay galleries [71]. Dramatic improvements in barrier properties, thermal stability, and modulus were observed for these nanocomposites. Polyimide-clay nanocomposites containing only a small fraction of clay exhibited a several-fold reduction in the... 

Above we have shown the attractiveness of the so-called green nanocomposites, although the research on these materials can still be considered to be in an embryonic phase. It can be expected that diverse nano- or micro-particles of silica, silicates, LDHs and carbonates could be used as ecological and low cost nanofillers that can be assembled with polysaccharides and other biopolymers. The controlled modification of natural polymers can alter the nature of the interactions between components, affording new formulations that could lead to bioplastics with improved mechanical and barrier properties. 

Most nanocomposite researchers obdurately believe that the preparation of a completely exfoliated structure is the ultimate target for better overall properties. However, these significant improvements are not observed in every nanocomposite system, including systems where the silicate layers are near to exfoliated [29]. While, from the barrier property standpoint, the development of exfoliated nanocomposites is always preferred, Nylon 6-based nanocomposite systems are completely different from other nanocomposite systems, as discussed [3,8]. 

In 2002, Lee et al. [51] reported the biodegradation of aliphatic polyester-based nanocomposites under compost. Figure 9.13(A, B) represent the clay content dependence of biodegradation of APES-based nanocomposites prepared with two different types of MMT clays. They assumed that the retardation of biodegradation was due to the improvement of the barrier properties of the aliphatic APSE after nanocomposite preparation with clay. However, there are no data about permeability. 

I, H. Tseng, Y. F. Liao, J. C. Chiang, M. H. Tsai, Transparent polyimide/graphene oxide nanocomposite with improved moisture barrier property., Materials Chemistry and Physics, vol. 136, pp. 247-253, 2012. 

Pol Tner Nanocomposites are novel plastic compounds with a filler having dimensions between 1 and 100 nm. They have attracted much attention in the past because nanocomposites exhibit markedly improved properties like stiffness, thermal flammability, improved barrier properties and others compared to the unfilled matrices [3], Among all potential fillers, those based on easily available clay and layered silicates have been more widely investigated for some time now. 

Nevertheless the euphoric optimism where these materials were allowed a huge potential in material applications has given way to a more realistic view. Nanocomposites are not a universal solution for reinforced materials. Their full potential can only be realised if every step in the added value chain is taken into account during the whole development process. From todays perspective nanocomposite materials with an improved thermal flammability resistance or improved barrier properties have the best chances to fulfil these requirements. 

Polymer-clay nanocomposites (PCN) are a class of hybrid materials composed of organic polymer matrices and organophilic clay fillers, introduced in late 1980s by the researchers of Toyota (Kawasumi, 2004). They observed an increase in mechanical and thermal properties of nylons with the addition of a small amount of nano-sized clays. This new and emerging class of pol miers has found several applications in the food and non-food sectors, such as in constmction, automobiles, aerospace, military, electronics, food packaging and coatings, because of its superior mechanical strength, heat and flame resistance and improved barrier properties (Ray et al., 2006). 

Park, H.W., Lee, W. K.,Park, C. Y.,Cho, W. J., Ha, C. S. (2003). Environmentally friendly polymer hybrids Parti. Meehanical, thermal, and barrier properties of thermoplastie stareh/elay nanocomposites. Journal of Materials Science, 38, 909-915. 

The most important materials developed are nanocomposites and nanotubes. Fabrication of the first nanocomposites was inspired by nature (biomineralisation). Nanocomposites based on nanoclays and plastics are seen as ideal materials for improved barrier properties against oxygen, water, carbon dioxide and volatiles [37]. This makes them in particular suitable for retaining flavours in foods. The technology is rather straightforward using commercially available nanoclays and extrusion processing. 

From a morphological point of view, there are four fundamental parameters that can be adjusted to maximize the barrier properties of clay nanocomposites. 

Furthermore, another advantage of nanofillers is not only to reinforce the rubber matrix but also to impart a number of other properties such as barrier properties, flammability resistance, electrical/electronic and membrane properties, and polymer blend compatibility. In spite of tremendous research activities in the field of polymer nanocomposites during the last two decades, elastomeric nanocomposites... 

---