Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Methyl acetate, from oxidation

Commercial production of acetic acid has been revolutionized in the decade 1978—1988. Butane—naphtha Hquid-phase catalytic oxidation has declined precipitously as methanol [67-56-1] or methyl acetate [79-20-9] carbonylation has become the technology of choice in the world market. By-product acetic acid recovery in other hydrocarbon oxidations, eg, in xylene oxidation to terephthaUc acid and propylene conversion to acryflc acid, has also grown. Production from synthesis gas is increasing and the development of alternative raw materials is under serious consideration following widespread dislocations in the cost of raw material (see Chemurgy). [Pg.66]

Currently, almost all acetic acid produced commercially comes from acetaldehyde oxidation, methanol or methyl acetate carbonylation, or light hydrocarbon Hquid-phase oxidation. Comparatively small amounts are generated by butane Hquid-phase oxidation, direct ethanol oxidation, and synthesis gas. Large amounts of acetic acid are recycled industrially in the production of cellulose acetate, poly(vinyl alcohol), and aspirin and in a broad array of other... [Pg.66]

Ethylene oxide adds to the bis(2-hydtoxyethyl) teitiaiy amine in a random fashion where x y y = n y2. Ethoxylated amines, varying from strongly cationic to very weakly cationic in character, are available containing up to 50 mol of ethylene oxide/mol of amine. Ethyoxylated fatty amine quaternaries, cationic surfactants (both chloride from methyl chloride and acetate from acetic acid), ate also available. [Pg.219]

Nitrobenzaldehyde has been prepared from />-nitrotoluene by treatment with isoamyl nitrite in the presence of sodium methylate,1 by oxidation with chromyl chloride,2 cerium dioxide,3 or chromium trioxide in the presence of acetic anhydride.4 It can also be prepared by the oxidation of -nitrobenzyl chloride,5 7>-nitrobenzyl alcohol,6 or the esters of -nitrocinnamic acid.7... [Pg.63]

The third reason for favoring a non-radical pathway is based on studies of a mutant version of the CFeSP. This mutant was generated by changing a cysteine residue to an alanine, which converts the 4Fe-4S cluster of the CFeSP into a 3Fe-4S cluster (14). This mutation causes the redox potential of the 3Fe-4S cluster to increase by about 500 mV. The mutant is incapable of coupling the reduction of the cobalt center to the oxidation of CO by CODH. Correspondingly, it is unable to participate in acetate synthesis from CH3-H4 folate, CO, and CoA unless chemical reductants are present. If mechanism 3 (discussed earlier) is correct, then the methyl transfer from the methylated corrinoid protein to CODH should be crippled. However, this reaction occurred at equal rates with the wild-type protein and the CFeSP variant. We feel that this result rules out the possibility of a radical methyl transfer mechanics and offers strong support for mechanism 1. [Pg.324]

The removal of angular methyl groups is important in the transformation of steroids and related compounds. In these reactions, the methyl group is oxidized to the aldehyde before fission in which the carbonyl group oxygen is retained in formate (or acetate), and one oxygen atom from dioxygen... [Pg.116]

In contrast, dissimilation of acetate may take place by reversal of the pathway used by organisms snch as Clostridium thermoaceticum for the synthesis of acetate from COj. In the degradation of acetate, the pathway involves a dismutation in which the methyl group is successively oxidized via methyl THF to COj while the carbonyl group is oxidized via bound carbon monoxide. Snch THF-mediated reactions are of great importance in the anaerobic degradation of pnrines, which is discussed in Chapter 10, Part 1. [Pg.319]

Furthermore, even the ligand, necessary to stabilize the catalyst, can reduce Pd(II) to Pd(0) complexes and formation of phosphine oxides [62-64], In the preparation of [Pd(AcO)2(dppp)], from Pd(AcO)2 and dppp in MeOH, phosphine oxides have been found to form together with methyl acetate and palladium metal [65]. The reaction can be schematized as follows ... [Pg.138]

The reactions unique to the pathway for Methanosarcina thermophila are shown in Figure 11.2 and Table 11.3. In the pathway, the carbon-carbon bond of acetate is cleaved, followed by reduction of the methyl group to methane with electrons originating from oxidation of the carbonyl group to carbon dioxide thus the pathway is a true fermentation. [Pg.151]

While the direct carbonylation is well accepted by industry, the reductive and oxidative carbonylations are still in the research and development stage. Using Texaco technology (j, 7/ ) the combined synthesis of ethene and ethanol is feasible via homologation of acids according to Figure 3. Ethene can also be obtained from the reductive carbonylation of methyl acetate to ethyl acetate followed by pyrolysis (2 ). Both routes, so far, lack selectivity. [Pg.8]

Methyl iodide is likely generated from methyl acetate and HI (equation 7) a portion of the iodide species in the reaction mixture certainly exists in the form of hydrogen iodide (equations 11, 12). Iodide ion tends to attack the -carbon of the alkyl portion of unhindered esters ( 7). Thus, methyl acetate, which would be in general inert to the metal complexes used, is converted to a reactive species which can readily oxidatively add to a palladium(0) complex. An... [Pg.139]

Oxidation of Elaidic Acid Ozonization Products. Aliquots of the unseparated ozonization products from elaidic acid were autoxidized at 95 °C. uncatalyzed and in acetone over reduced platinum oxide as before. Total yields of acids and esters were determined by titration and were found to be 74.6 and 19.2%, respectively, in the catalyzed reaction with uptake of 63% of the theoretical volume of oxygen. Time required for uptake of half this volume was 4 hours at 21 °C. Uncatalyzed oxidation at 95°C. of the other fraction gave 27.4% yield of esters and 74.5% yield of acids, calculated on the assumption that one original olefinic linkage can produce one ester function or two acid functions. When elaidic acid was ozonized in methyl acetate and the catalyzed oxidation performed in the same solvent, acid yield was 80.8%, and ester yield was 7.3% with a half-uptake time of 5.6 hours and 88% of the theoretical quantity of... [Pg.261]

The reduced basicity of phenothiazine nitrogen requires that even acylation proceed via the anion. The amide (34-2) from the methyl thioether (34-1) can be prepared, for example, by sequential reaction with sodium amide and acetic anhydride. Oxidation of that intermediate with peracid proceeds preferentially on the more electron-rich alkyl thioether to give the sulfone this affords the phenothiazine (34-3) on hydrolysis of the amide. Complex side chains are most conveniently incorporated in a stepwise fashion. The first step in the present sequence involves reaction of (34-3) as its anion with l-bromo-3-chloropropane to give (34-4). The use of that halide with alkylate piperidine-4-carboxamide (34-5) affords the antipsychotic agent metopimazine (34-6) [35]. [Pg.535]

Methyl iodide for oxidative addition to the rhodium complex is generated from the reaction of methyl acetate and lithium iodide ... [Pg.369]

Tb a solution of 7 (458 mg, 1.7 mmol) and /V-methyl morpholine /7-oxide (244 mg) in r-butanol (1 mL), a few crystals of osmium tetraoxide dissolved in THF (1.5 mL) were added. After 3 days 40% aqueous solution of NaHS03 (3 mL) was added, the mixture was stirred for additional 30 min, and extracted with ethyl acetate (3 x 20 mL). The extracts were dried (MgS()4) and concentrated to dryness. The residue was purified by chromatography on a silica gel column with light petroleum-ether-methanol (4 5 0.5) to yield 9 (371 mg, 72%) mp 89.5° (from a mixture of hexane and ethyl acetate), [a]D + 52° (c 1.0, CHClj). [Pg.632]

The only claim for the production of a metallocarboxylic acid from the insertion of C02 into a metal-hydrogen bond in the opposite sense is based on the reaction of C02 with [HCo(N2)(PPh3)3] (108, 136). The metallocarboxylic acid is said to be implicated since treatment of the product in benzene solution with Mel followed by methanolic BF3 yielded a considerable amount of methyl acetate as well as methyl formate derived from the cobalt formate complex. Metallocarboxylic acid species formed by attack of H20 or OH- on a coordinated carbonyl are considered in the section on CO oxidation. [Pg.131]


See other pages where Methyl acetate, from oxidation is mentioned: [Pg.69]    [Pg.514]    [Pg.19]    [Pg.289]    [Pg.284]    [Pg.729]    [Pg.152]    [Pg.109]    [Pg.178]    [Pg.10]    [Pg.323]    [Pg.486]    [Pg.109]    [Pg.302]    [Pg.163]    [Pg.238]    [Pg.87]    [Pg.143]    [Pg.197]    [Pg.385]    [Pg.289]    [Pg.260]    [Pg.260]    [Pg.289]    [Pg.19]    [Pg.330]    [Pg.645]    [Pg.514]    [Pg.521]    [Pg.240]    [Pg.662]   


SEARCH



Acetal from

Acetalization-oxidation

Acetals methylation

Acetals oxidation

Acetate oxidation

Acetates methylated

Acetic from oxidation

Acetic oxide

Methyl 3-oxid

Methyl acetals

Methyl acetate

Methyl acetate, oxidation

Methyl from oxidation

Methyl oxide

Methyl, oxidation

© 2024 chempedia.info