Methanol fuel cell technology using

MTI Micro introduced in 2004 the integrated direct methanol fuel cell technology Mobion , and in 2007 the Mobion Chip . This small device, with a volume of only 9 cm, is fed with pure methanol to produce 84 mW.cm. These prototypes are passive DMFC and their design include a fuel conditioning system which allows operate in a temperature range of 0 0 °C, independent of the humidity and cell position, which is particularly useful in portable applications, such as mobile phones [40]. 

The electrocatalytic oxidation of methanol has been widely investigated for exploitation in the so-called direct methanol fuel cell (DMFC). The most likely type of DMFC to be commercialized in the near future seems to be the polymer electrolyte membrane DMFC using proton exchange membrane, a special form of low-temperature fuel cell based on PEM technology. In this cell, methanol (a liquid fuel available at low cost, easily handled, stored, and transported) is dissolved in an acid electrolyte and burned directly by air to carbon dioxide. The prominence of the DMFCs with respect to safety, simple device fabrication, and low cost has rendered them promising candidates for applications ranging from portable power sources to secondary cells for prospective electric vehicles. Notwithstanding, DMFCs were... 

In addition to these smaller applications, fuel cells can be used in portable generators, such as those used to provide electricity for portable equipment. Thousands of portable fuel cell systems have been developed and operated worldwide, ranging from 1 watt to 1.5 kilowatts in power. The two primary technologies for portable applications are polymer electrolyte membrane (PEM) and direct methanol fuel cell (DMFC) designs. 

All fuel cells for use in vehicles are based on proton-exchange-membrane fuel cell (PEMFC) technology. The methanol fuel-processor fuel cell (FPFC) vehicle comprises an on-board fuel processor with downstream PEMFC. On-board methanol reforming was a development focus of industry for a number of years until around 2002. Direct-methanol fuel cells (DMFC) are no longer considered for the propulsion of commercial vehicles in the industry (see also Chapter 13). 

Given these requirements, hybrid and nonhybrid PEMFC systems are the leading contenders for automotive fuel cell power, with additional attention focusing on the direct-methanol fuel cell (DMFC) version of the technology and the possibility of using solid oxide fuel cell (SOFC) systems as auxiliary power units for cars and trucks. 

Fuel cells are classified primarily according to the nature of the electrolyte. Moreover, the nature of the electrolyte governs the choices of the electrodes and the operation temperatures. Shown in table 10.1 are the fuel cell technologies currently under development. "" Technologies attracting attention toward development and commercialization include direct methanol (DMFC), polymer electrolyte membrane (PEMFC), solid-acid (SAFC), phosphoric acid (PAFC), alkaline (AFC), molten carbonate (MCFC), and solid-oxide (SOFC) fuel cells. This chapter is aimed at the solid-oxide fuel cells (SOFCs) and related electrolytes used for the fabrication of cells. 

---