Metal salts, molten

An important iadustrial use of NaH involves its in situ formation ia molten NaOH or ia fused eutectic salt baths. At concentrations of 1—2% NaH, these compositions are powerful reducing systems for metal salts and oxides (5). They have been used industrially for descaling metals such as high alloy steels, titanium, zirconium, etc. 

These facts would suggest that die electrolysis of molten alkali metal salts could lead to the inuoduction of mobile elecU ons which can diffuse rapidly through a melt, and any chemical reduction process resulting from a high chemical potential of the alkali metal could occur in the body of the melt, rather than being conhned to the cathode volume. This probably explains the failure of attempts to produce tire refractoty elements, such as titanium, by elecU olysis of a molten sodium chloride-titanium chloride melt, in which a metal dust is formed in the bulk of the elecU olyte. 

Hollow carbon nanotubes (CNTs) can be used to generate nearly onedimensional nanostrutures by filling the inner cavity with selected materials. Capillarity forces can be used to introduce liquids into the nanometric systems. Here, we describe experimental studies of capillarity filling in CNTs using metal salts and oxides. The filling process involves, first a CNT-opening steps by oxidation secondly the tubes are immersed into different molten substance. The capillarity-introduced materials are subsequently transformed into metals or oxides by a thermal treatment. In particular, we have observed a size dependence of capillarity forces in CNTs. The described experiments show the present capacities and potentialities of filled CNTs for fabrication of novel nanostructured materials. 

More generally, Valez et al. have reviewed the corrosion behaviour of silicate and borate glasses in contact with alkali metals and molten salts, as well as in aqueous conditions. 

It has been established that salts can deposit or form on metals during gas-metal reactions. Molten layers could then develop at high operating temperatures. Consequently, the laboratory testing of corrosion resistance in molten salts could yield valuable results for evaluating resistance to some high-temperature gaseous environments. 

Many plastics because they are organic are flammable incorporate flame-retardants. Additives that contain chlorine, bromine, phosphorous, metallic salts, and so forth reduce the likelihood that combustion will occur or spread. Lubricants like wax or calcium stearate reduce the viscosity of molten plastic... 

Schweikhardt, R.D. "Metal-Salt Reactions in Molten Systems of Plutonium Metal and NaCl, NaCl-KCl, and NaCl-KCl-MgCl2" thesis, Univ. of Denver, August 1966. 

Research should continue on traditional separation methods. For example, there is a continuing need for more selective extraction agents for liquid-liquid and ion-exchange extractions. High-temperature processes that use liquid metals or molten salts as extraction agents should have potential in nuclear fuel reprocessing and... 

N. Q. Minh, Extraction of Metals by Molten Salt Electrolysis Chemical Fundamentals And Design Factors, J. Metals, p. 28, Jan. 1985. 

One technique used in a number of facilities that utilize molten salt for metal surface treatment prior to pickling is to take advantage of the alkaline values generated in the molten salt bath in treating other wastes generated in the plant. When the bath is determined to be spent, it is in many instances manifested, hauled off-site, and land disposed. One technique is to take the solidified spent molten salt (molten salt is sold at ambient temperatures) and circulate acidic wastes generated in the facility over the material prior to entry into the waste treatment system. This in effect neutralizes the acid wastes and eliminates the requirements of manifesting and land disposal. 

Pure aluminum is soft, light, and malleable. It is the most common metal in the Earth s crust (ca. 8 %). Small amounts of Cu or Mg additives make it hard and firm. The surface is passivated with an oxide layer. Produced by fused-salt molten flux electrolysis. Cannot be welded, but is nevertheless optimal for airplanes (in which case it is riveted), construction units (windows, frames), and utensils such as cans, foil, and tubes. Increasingly found in cars in order to minimize weight. Tiny holes are burnt into extremely thin aluminum films in data-storage units. It has no function in physiology, but Al ions in the bloodstream can be detrimental. 

The crystallinity levels in ethylene ionomers are generally low due to their high levels of branching and the clustering of the metal salts. At high temperatures, the clusters dissociate and the individual chains can move independently in the molten state, permitting them to be molded. When the ionomer is cooled dusters reform, crosslinking the chains... 

Recently, there has been considerable interest in developing molten salts that are less air and moisture sensitive. Melts such as l-methyl-3-butylimidazolium hexa-fluorophosphate [211], l-ethyl-3-methylimidazolium trifluoromethanesulfonate [212], and l-ethyl-3-methylimidazolium tetrafluoroborate [213] are reported to be hydro-phobic and stable under environmental conditions. In some cases, metal deposition from these electrolytes has been explored [214]. They possess a wide potential window and sufficient ionic conductivity to be considered for many electrochemical applications. Of course if one wishes to take advantage of their potential air stability, one loses the opportunity to work with the alkali and reactive metals. Further, since these ionic liquids are neutral and lack the adjustable Lewis acidity common to the chloroaluminates, the solubility of transition metal salts into these electrolytes may be limited. On a positive note, these electrolytes are significantly different from the chloroaluminates in that the supporting electrolyte is not intended to be electroactive. 

In addition to the reactions just described using molten pipHSCN, several reactions have been carried out at low temperature by sonicating mixtures of metal salts and pipHSCN (House, 1998). The use of ultrasound results in products of higher purity than when the molten salt is used. This is probably due to the fact that some of the products are not very stable at the temperature of the molten salt (100 °C) and mixtures result under those conditions. In carrying out the reactions, the amine hydrothiocyanate and the metal compound were suspended in dodecane and pulsed ultrasound was applied. The fol-... 

METAL POLYHALOHALOGENATES, MOLTEN SALT BATHS NITROALKANES, NON-METAL PERCHLORATES OXIDES OF NITROGEN... 

During the electrorefining of uranium metal in a molten salt eutectic, a low current density favors the formation of large single crystals. Up to 5-cm single crystals of uranium metal have resulted from the large-scale (100 kg of U) electrorefining of uranium metal in molten LiCl/KCl eutectic (17). 

Various processes separate rare earths from other metal salts. These processes also separate rare earths into specific subgroups. The methods are based on fractional precipitation, selective extraction by nonaqueous solvents, or selective ion exchange. Separation of individual rare earths is the most important step in recovery. Separation may be achieved by ion exchange and solvent extraction techniques. Also, ytterbium may be separated from a mixture of heavy rare earths by reduction with sodium amalgam. In this method, a buffered acidic solution of trivalent heavy rare earths is treated with molten sodium mercury alloy. Ybs+ is reduced and dissolved in the molten alloy. The alloy is treated with hydrochloric acid, after which ytterbium is extracted into the solution. The metal is precipitated as oxalate from solution. 

---