Reductive elimination metal

Common reactivity patterns for palladium complexes are also relevant to the chemistry of palladacyclobutane complexes. The arene nrtfej-metallation/reductive elimination cascade observed for palladacyclobutanone complex 129 provide one illustration (Equation 42), hinting at the potential for developing other oxidative transformations of proximal arene functionality <19980M5887>. 

Various aromatic dibromides have been cross-coupled with difunctional tributyltin aromatic compounds in the presence of palladium-based catalysts to yield poly(arylene)s [scheme (12)] [149-151]. The mechanistic pathway of this coupling, known as Stille coupling [152], follows an oxidative addition-trans-metallation-reductive elimination sequence. 

These reactions involve a decrease in the oxidation number of the metal (in this case Ir to Ir ), and a decrease in coordination number for the metal. Reductive elimination reactions are very important in catalysis as the product-removing step. Frequently, the reductive elimination reactions are rapid, making detailed study difficult. 

As mentioned earlier, reductive elimination reactions are commonly observed processes that involve M-Si bond cleavage. Usually the transition-metal reductive elimination product is trapped by an added reagent such as a silane (equation 63)204, a germane (equation 64)205, a phosphine (equation 65)167 or hydrogen (equation 66, dppe = Ph2PCH2CH2PPh2)206. The latter reaction with hydrogen probably proceeds via initial oxidative addition of H2 to form a Pt(IV) intermediate. In the case of chiral complex ds-(SX-)-[(l-Naph)PhMeSi]PtH(PPh3)2, elimination of the silane upon addi-... 

Reductive eliminations tend to be faster from complexes of first-row metals than from complexes of second-row metals, which in turn tend to be faster than those from complexes of third-row metals. Reductive eliminations from complexes of second-row metals are more favorable thermodynamically than reductive eliminations from third-row metals because the metal-ligand bonds in the second-row reactant are weaker. 

Several other mechanistically distinct metal-catalyzed dearomatization procedures have been reported, and almost all involve phenol or naphthol derivatives undergoing dearomatization via intramolecular transformations. Intramolecular Pd- and Rh-catalyzed C4-arylation and alkylation of /)ara-substituted phenols has been used to construct compounds of general structure 82 (Fig. 15.1) [86]. These reactions rely on generation of electrophilic aryl or alkyl o-metal complex intermediates that participate in tandem C4 metalation-reductive elimination with an attached phenol. Ruthenium- and Pt-catalyzed reactions of naphthalenes and alkynes deliver spirocyclic products such as 83 [87, 88]. An asymmetric intramolecular naphthalene dearomatization catalyzed by Pd(0)-phosphine complexes has been used to prepare carbazole derivatives 84 in good enantiomeric excess from l-(AI-2-bromophenyl)aminonaphthalene precursors [89]. 

The insertion of a metal between two atoms is called oxidative addition—two new groups are added to the metal. Reductive elimination eliminates two groups from the metal. Thus, the first step in a Suzuki reaction is an oxidative addition, and the last step is a reductive elimination. 

Abstract The application of modem density functional theory techniques to the computational study of paUadium-catalyzed C-C formation reactions has led to a better mechanistic understanding of these processes of fundamental interest in organic chemistry. This chapter reviews the main contributions to the topic, analyzing the current knowledge on the different reaction steps oxidative addition, transmetalation, metalation, reductive elimination and isomerization. A special emphasis is placed on the metalation step, which is specific of C-C bond formation processes. 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

A trialkylsilyl group can be introduced into aryl or alkenyl groups using hexaalkyidisilanes. The Si—Si bond is cleaved with a Pd catalyst, and trans-metallation and reductive elimination afford the silylated products. In this way, 1,2-bis-silylethylene 761 is prepared from 1,2-dichloroethylene (760)[625,626], The facile reaction of (Me3Si)2 to give 762 proceeds at room temperature in the presence of fluoride anion[627]. Alkenyl- and arylsilanes are prepared by the reaction of (Me3Si)3Al (763)[628],... 

Silyl enol ethers are other ketone or aldehyde enolate equivalents and react with allyl carbonate to give allyl ketones or aldehydes 13,300. The transme-tallation of the 7r-allylpalladium methoxide, formed from allyl alkyl carbonate, with the silyl enol ether 464 forms the palladium enolate 465, which undergoes reductive elimination to afford the allyl ketone or aldehyde 466. For this reaction, neither fluoride anion nor a Lewis acid is necessary for the activation of silyl enol ethers. The reaction also proceed.s with metallic Pd supported on silica by a special method[301j. The ketene silyl acetal 467 derived from esters or lactones also reacts with allyl carbonates, affording allylated esters or lactones by using dppe as a ligand[302]... 

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. 

Ca.ta.lysis, Iridium compounds do not have industrial appHcations as catalysts. However, these compounds have been studied to model fundamental catalytic steps (174), such as substrate binding of unsaturated molecules and dioxygen oxidative addition of hydrogen, alkyl haHdes, and the carbon—hydrogen bond reductive elimination and important metal-centered transformations such as carbonylation, -elimination, CO reduction, and... 

Dehalogenation of monochlorotoluenes can be readily effected with hydrogen and noble metal catalysts (34). Conversion of -chlorotoluene to Ncyanotoluene is accompHshed by reaction with tetraethyl ammonium cyanide and zero-valent Group (VIII) metal complexes, such as those of nickel or palladium (35). The reaction proceeds by initial oxidative addition of the aryl haHde to the zerovalent metal complex, followed by attack of cyanide ion on the metal and reductive elimination of the aryl cyanide. Methylstyrene is prepared from -chlorotoluene by a vinylation reaction using ethylene as the reagent and a catalyst derived from zinc, a triarylphosphine, and a nickel salt (36). 

The acetates of vicinal diols undergo reductive elimination on treatment with metal-ammonia yields of olefin are only significant if one ester is tertiary and the arrangement is tran -diaxial. ... 

C-C bonds can be formed by reaction with alkyl iodides or more usefully by reaction with metal carbonyls to give aldehydes and ketones e.g. Ni(CO)4 reacts with LiR to form an unstable acyl nickel carbonyl complex which can be attacked by electrophiles such as H+ or R Br to give aldehydes or ketones by solvent-induced reductive elimination ... 

Another means of in situ metal-carbene complex formation in an ionic liquid is the direct oxidative addition of the imidazolium cation to a metal center in a low oxidation state (see Scheme 5.2-2, route b)). Cavell and co-workers have observed oxidative addition on heating 1,3-dimethylimidazolium tetrafluoroborate with Pt(PPli3)4 in refluxing THF [32]. The Pt-carbene complex formed can decompose by reductive elimination. Winterton et al. have also described the formation of a Pt-car-bene complex by oxidative addition of the [EMIM] cation to PtCl2 in a basic [EMIM]C1/A1C13 system (free CP ions present) under ethylene pressure [33]. The formation of a Pt-carbene complex by oxidative addition of the imidazolium cation is displayed in Scheme 5.2-4. 

Incorporation of a chiral phosphane allowed resolution of the complex 6 which was obtained in enantiomerically pure form. Reaction of 6 with 2,2-dimethylpropanal provided the adduct 7 as the sole observable aldol product13. Oxidation of the metal center of 7 with ferric chloride induced decomplexation via reductive elimination, to provide the enantiomerically pure cy-clobutanone 8. 

The oxidative addition of silanes (with silicon-hydrogen bonds) to coordinatively unsaturated metal complexes is one of the most elegant methods for the formation of metal-silicon bonds. Under this heading normally reactions are considered which yield stable silyl metal hydrides. However, in some cases the oxidative addition is accompanied by a subsequent reductive elimination of, e.g., hydrogen, and only the products of the elimination step can be isolated. Such reactions are considered in this section as well. 

Remarkable solvent effects on the selective bond cleavage are observed in the reductive elimination of cis-stilbene episulfone by complex metal hydrides. When diethyl ether or [bis(2-methoxyethyl)]ether is used as the solvent, dibenzyl sulfone is formed along with cis-stilbene. However, no dibenzyl sulfone is produced when cis-stilbene episulfone is treated with lithium aluminum hydride in tetrahydrofuran at room temperature (equation 42). Elimination of phenylsulfonyl group by tri-n-butyltin hydride proceeds by a radical chain mechanism (equations 43 and 44). 

Coupling of alkenylcarbene complexes and siloxy-substituted 1,3-dienes affords vinylcyclopentene derivatives through a formal [3C+2S] cycloaddition process. This unusual reaction is explained by an initial [4C+2S] cycloaddition of the electron-poor chromadiene system as the 471 component and the terminal double bond of the siloxydiene as the dienophile. The chromacyclohexene intermediate evolves by a reductive elimination of the metal fragment to generate the [3C+2S] cyclopentene derivatives [73] (Scheme 26). 

---