Metal oxides, and hydrogenation

Rhenium exhibits a greater resistance than tungsten to the water cycle effect, in which lamps and electron tubes become blackened by deposition of metal. This phenomenon involves catalysis by small quantities of water that react with the metal in a hot filament to produce a volatile metal oxide and hydrogen. The oxide condenses on the surface of the bulb and is reduced back to the metal by hydrogen. 

The moderately reactive metals, magnesium, zinc and iron, react slowly with water. They will, however, react more rapidly with steam (Figure 10.3). In their reaction with steam, the metal oxide and hydrogen are formed. For example, magnesium produces magnesium oxide and hydrogen gas. 

The present author found a non-empirical method to describe the antiferromagnetic state of transition metal oxides and hydrogen clusters with a relatively long H-H distance [1-3]. The study used the discrete variational (DV)-Xa molecular orbital theory, which has been successfully applied to analyze properties of... 

The IF structures and nanotubes for WS2 were first observed during hydrodesulfurization using thin films of tungsten [50]. Tenne and coworkers [59-62] developed a precursor synthetic method for obtaining both IF-MS2 (M = Mo, W) and nanotubes. The method is based on a gas-phase reaction between partially reduced metal oxides and hydrogen sulfide. The synthesis consists of three steps. First is the formation of the oxide MO3. For M = W, this step involves the preparation of WO3 by heating a mngsten filament in the presence of wate vapor. The second step is the partial reduction of the oxide to an amorphous suboxide MO3 c. For W, the reduction of WO3 produces in the form of needle-... 

Less-active metals, such as iron, react with steam to form a metal oxide and hydrogen gas. 

DMF can also be manufactured from carbon dioxide, hydrogen, and dimethylamine ia the presence of halogen-containing transition-metal compounds (18). The reaction has also been performed with metal oxides and salts of alkaU metals as promoters (19). 

At elevated temperatures, CaH2 reacts with halogens, sulfur, phosphoms, alcohols, and ammonia. At high temperatures, it reacts with refractory metal oxides and haUdes. Calcium hydride is substantially inert to organic compounds that do not contain acidic hydrogens. 

Reduction of metal oxides with hydrogen is of interest in the metals refining industry (94,95) (see Metallurgy). Hydrogen is also used to reduce sulfites to sulfides in one step in the removal of SO2 pollutants (see Airpollution) (96). Hydrogen reacts directiy with SO2 under catalytic conditions to produce elemental sulfur and H2S (97—98). Under certain conditions, hydrogen reacts with nitric oxide, an atmospheric poUutant and contributor to photochemical smog, to produce N2 ... 

A wide range and a number of purification steps are required to make available hydrogen/synthesis gas having the desired purity that depends on use. Technology is available in many forms and combinations for specific hydrogen purification requirements. Methods include physical and chemical treatments (solvent scmbbing) low temperature (cryogenic) systems adsorption on soHds, such as active carbon, metal oxides, and molecular sieves, and various membrane systems. Composition of the raw gas and the amount of impurities that can be tolerated in the product determine the selection of the most suitable process. 

Sihca is reduced to siUcon at 1300—1400°C by hydrogen, carbon, and a variety of metallic elements. Gaseous siUcon monoxide is also formed. At pressures of >40 MPa (400 atm), in the presence of aluminum and aluminum haUdes, siUca can be converted to silane in high yields by reaction with hydrogen (15). SiUcon itself is not hydrogenated under these conditions. The formation of siUcon by reduction of siUca with carbon is important in the technical preparation of the element and its alloys and in the preparation of siUcon carbide in the electric furnace. Reduction with lithium and sodium occurs at 200—250°C, with the formation of metal oxide and siUcate. At 800—900°C, siUca is reduced by calcium, magnesium, and aluminum. Other metals reported to reduce siUca to the element include manganese, iron, niobium, uranium, lanthanum, cerium, and neodymium (16). 

CatalyticaHy Active Species. The most common catalyticaHy active materials are metals, metal oxides, and metal sulfides. OccasionaHy, these are used in pure form examples are Raney nickel, used for fat hydrogenation, and y-Al O, used for ethanol dehydration. More often the catalyticaHy active component is highly dispersed on the surface of a support and may constitute no more than about 1% of the total catalyst. The main reason for dispersing the catalytic species is the expense. The expensive material must be accessible to reactants, and this requires that most of the catalytic material be present at a surface. This is possible only if the material is dispersed as minute particles, as smaH as 1 nm in diameter and even less. It is not practical to use minute... 

The thermodynamic data pertinent to the corrosion of metals in aqueous media have been systematically assembled in a form that has become known as Pourbaix diagrams (11). The data include the potential and pH dependence of metal, metal oxide, and metal hydroxide reactions and, in some cases, complex ions. The potential and pH dependence of the hydrogen and oxygen reactions are also suppHed because these are the common corrosion cathodic reactions. The Pourbaix diagram for the iron—water system is given as Figure 1. 

Electrochemical Process. Several patents claim that ethylene oxide is produced ia good yields ia addition to faradic quantities of substantially pure hydrogen when water and ethylene react ia an electrochemical cell to form ethylene oxide and hydrogen (206—208). The only raw materials that are utilized ia the ethylene oxide formation are ethylene, water, and electrical energy. The electrolyte is regenerated in situ ie, within the electrolytic cell. The addition of oxygen to the ethylene is activated by a catalyst such as elemental silver or its compounds at the anode or its vicinity (206). The common electrolytes used are water-soluble alkah metal phosphates, borates, sulfates, or chromates at ca 22—25°C (207). The process can be either batch or continuous (see Electrochemicalprocessing). 

The isocyanates are believed to aid wetting of metals by interacting with the metal oxides and hydroxides (M-OH) present on the surface. The isocyanates can then react with water to form a rigid polyurea network which interacts at the metal surface through hydrogen bonding. The isocyanates also react to form hard segments , which will be explained shortly. 

The Af-HjO diagrams present the equilibria at various pHs and potentials between the metal, metal ions and solid oxides and hydroxides for systems in which the only reactants are metal, water, and hydrogen and hydroxyl ions a situation that is extremely unlikely to prevail in real solutions that usually contain a variety of electrolytes and non-electrolytes. Thus a solution of pH 1 may be prepared from either hydrochloric, sulphuric, nitric or perchloric acids, and in each case a different anion will be introduced into the solution with the consequent possibility of the formation of species other than those predicted in the Af-HjO system. In general, anions that form soluble complexes will tend to extend the zones of corrosion, whereas anions that form insoluble compounds will tend to extend the zone of passivity. However, provided the relevant thermodynamic data are aveiil-able, the effect of these anions can be incorporated into the diagram, and diagrams of the type Af-HjO-A" are available in Cebelcor reports and in the published literature. 

It is not affected by halogens or acids, except for phosphoric and hydrofluoric acids. Phosphoric acid attacks fused silica at temperatures of 300-400°C, and hydrofluoric acid attacks it at room temperature, forming silicon tetrafluoride and water. At high temperatures silica reacts with caustic alkalis, certain metallic oxides, and some basic salts, and cannot be used for incinerating these materials. Over 1600°C, fused silica is reduced to silicon by carbon. It can also be reduced at high temperature by hydrogen. It is unaffected by water under normal conditions but is attacked by strong solutions of alkalis. 

Metal Oxide and Catalytic Bead Hydrogen Sensors.511... 

Reduction reactions of metal oxides by hydrogen start with the dissociative adsorption of H2, which is a much more difficult process on oxides than on metals. Atomic hydrogen takes care of the actual reduction. Depending on how fast or how slow the dissociative adsorption is in comparison to the subsequent reduction reactions which comprise diffusion of atomic hydrogen into the lattice, reaction with oxygen and removal of the hydroxyl species formed, two limiting cases are distinguished [1,7]. 

Nearly all unsaturated compounds react rapidly with hydrogen at low temperatures and pressures in presence of finely divided metal catalysts such as nickel, platinum and palladium. For maximum catalytic effect, the metal is taken in the finely divided state. This is achieved for platinum and palladium by reducing the metal oxide with hydrogen. A specially active form of nickel is the Raney nickel . 

---