Mercury physical properties

The physical properties of bismuth, summarized ia Table 1, are characterized by a low melting poiat, a high density, and expansion on solidification. Thermochemical and thermodynamic data are summarized ia Table 2. The soHd metal floats on the Hquid metal as ice floating on water. GaUium and antimony are the only other metals that expand on solidification. Bismuth is the most diamagnetic of the metals, and it is a poor electrical conductor. The thermal conductivity of bismuth is lower than that of any other metal except mercury. 

Important physical properties of catalysts include the particle size and shape, surface area, pore volume, pore size distribution, and strength to resist cmshing and abrasion. Measurements of catalyst physical properties (43) are routine and often automated. Pores with diameters <2.0 nm are called micropores those with diameters between 2.0 and 5.0 nm are called mesopores and those with diameters >5.0 nm are called macropores. Pore volumes and pore size distributions are measured by mercury penetration and by N2 adsorption. Mercury is forced into the pores under pressure entry into a pore is opposed by surface tension. For example, a pressure of about 71 MPa (700 atm) is required to fill a pore with a diameter of 10 nm. The amount of uptake as a function of pressure determines the pore size distribution of the larger pores (44). In complementary experiments, the sizes of the smallest pores (those 1 to 20 nm in diameter) are deterrnined by measurements characterizing desorption of N2 from the catalyst. The basis for the measurement is the capillary condensation that occurs in small pores at pressures less than the vapor pressure of the adsorbed nitrogen. The smaller the diameter of the pore, the greater the lowering of the vapor pressure of the Hquid in it. 

Amalgams made with spherical particles may predominate ia use over those made with flake-shaped particles because the desirable plasticity is obtained with a lower mercury content, satisfactory compaction is achieved with lower packing pressures, and there is less influence of manipulative variables upon values for appropriate physical properties. 

A small amount of a liquid tends to take a spherical shape For example, mercury drops are nearly spherical and water drips from a faucet in nearly spherical liquid droplets. Surface tension, which measures the resistance of a liquid to an increase in its surface area, is the physical property responsible for this behavior. 

Neumann-SpaUart M, Tamizhmani G, Boutry-ForveiUe A, Levy-Clement C (1989) Physical properties of electrochemicaUy deposited cadmium mercury telluride films. Thin Solid Eilms 169 315-322... 

In recent years research in the field of transition-metal thiocyanates and selenocyanates received a new impetus, because of the partly interesting physical properties of such crystalline species. A review on Cd and Hg thiocyanate systems collects and sorts results of this endeavor.371 The nonlinear optical (NLO) properties of Cd thiocyanate and selenocyanate systems and criteria for the design of NLO crystals (crystal engineering), especially, have been discussed afterwards.372 Further contributions to the field have also been described.37, 374 The structure of mercury chlorothiocyanate has been re-determined.375... 

Physical properties are important for example, dissolution of metallic mercury is essential to allow its absorption. 

We classify the elements to the left of this line, excluding the metalloids and hydrogen, as the metals. The metals have physical properties that we normally associate with metals in the everyday world—they are solids (with the exception of mercury), they have a metallic luster, and are good conductors of both electricity and heat. They are malleable (capable of being hammered into thin sheets) and ductile (capable of being drawn into thin wires). And as we will see later in this book, the metals tend to lose electrons in chemical reactions. 

Although cadmium is not considered a transition element in some periodic tables, it is the central element of the triad with zinc and mercury. Zinc is just above it and mercury is below it in group 12 of the periodic table. Cadmiums chemical and physical properties are similar to its group 12 mates. Their electronegativity is very similar Zn = 1.6, Cd = 1.7, and Hg = 1.9. 

Mercury(I) chloride may be identified from its physical properties, its reaction with ammonia to form a black product, and it may be measured quantitatively for mercury by cold vapor-AA or ICP/AES. 

Elemental composition 86.96%, C 10.41%, H 2.62%. The compound can be identified from its physical properties, elemental analyses and infrared spectra. Mercury can be identified by cold-vapor AA or ICP/AES after cautious extraction with nitric acid. In a suitable organic solvent, it may be analyzed by GC/MS. The characteristic ions are 217, 215, 202, 200, 232 and 230. 

Elemental composition Hg 86.22%, S 13.78%. The compound may be identified from its physical properties and also by x-ray methods. The compound may be heated in a current of air and SO2 formed may be analyzed by GC-FID or GC-FPD. Mercury(II) sulfide may be digested with aqua regia, diluted appropriately, and analyzed for mercury metal by AA using cold vapor method or by ICP-AES (see Mercury). 

Few comprehensive classification schemes for CCP exist. The American Society for Testing and Materials (ASTM 1994) classifies two catgories of fly ash (Class F and Class C) based upon chemical and physical properties of the fly ash (the total amount of Si + A1 + Fe, sulphate, loss on ignition). This classification system was developed for the use of fly ash as an admixture in concrete. More recently, new classification schemes have been developed that place emphasis on textural descriptions, the form of carbon (or char ), and the surface properties of fly ash (Hower Mastalerz 2001). These new classification schemes for fly ash may be the result of growing concern over mercury emissions from coal-fired boilers. Studies have shown that mercury adsorption onto the surface of fly ash particles is a function of both the total carbon content and the gas temperature at the point of fly ash collection (Hower et al. 2000). 

Hg.O + HvO I 2e. -0,123 V, Oiher important physical properties ol mercury are given under Chenileal Elements. 

---