Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Membranes for Electronics

Many intensive scientific investigations are focused on the preparation and characterisation of new polymeric organic films. Many newer surface science techniques, designed and developed for semiconductors and dielectric materials, address specific details about the structure and morphology of these organic films. [Pg.271]

Biosensors have been widely researched and developed as a tool for medical and environmental monitoring. They are designed to produce a digital electronic signal that is proportional to the concentration of a specific chemical or a set of chemicals. [Pg.272]

Photoresists and electron-beam resists are the key to the success of VLSI electronic circuits. Without these resists, most electronic equipment would not exist. These polymers are spun onto the semiconductor and exposed to the circuit pattern leading to main chain scission or crosslinking. Subsequently, unpolymerised sections are removed. This process is employed either in wet or in dry conditions. This is known as the photolithographic process, which is part of the semiconductor fabrication technology. Further treatment includes diffusion of various semiconductor elements and metallisation for conduction lines. Layer by layer, the total package is developed. Current research is now directed toward finer features in the patterns and changes in the surface characteristics for subsequent layers. [Pg.273]

In the case of magnetic disks, storage density is demanded. Efforts to reduce the bit size by manoeuvring the read-write head closer to the disk surface tends to generate new problems such as stick or friction. To overcome these problems, lubricants were added [Pg.273]

Sanyo introduced electrolytic capacitors in 1983 based on tetracyanoquinodimethane (TCNQ). Since that times several other capacitors have been introduced into the marketplace. Polypyrrole, polyaniline and polythiophene have all been used. These capacitors range in values from 0.1 pF to 200 pF and have low equivalent series resistance and high frequency impedance with good reliability and lifetimes. [Pg.274]


Figure 12.13 Photosynthetic pigments are used hy plants and photosynthetic bacteria to capture photons of light and for electron flow from one side of a membrane to the other side. The diagram shows two such pigments that are present in bacterial reaction centers, bacteriochlorophyll (a) and ubiquinone (b). The light-absorbing parts of the molecules are shown in yellow, attached to hydrocarbon "tails" shown in green. Figure 12.13 Photosynthetic pigments are used hy plants and photosynthetic bacteria to capture photons of light and for electron flow from one side of a membrane to the other side. The diagram shows two such pigments that are present in bacterial reaction centers, bacteriochlorophyll (a) and ubiquinone (b). The light-absorbing parts of the molecules are shown in yellow, attached to hydrocarbon "tails" shown in green.
The structurally similar L and M subunits are related by a pseudo-twofold symmetry axis through the core, between the helices of the four-helix bundle motif. The photosynthetic pigments are bound to these subunits, most of them to the transmembrane helices, and they are also related by the same twofold symmetry axis (Figure 12.15). The pigments are arranged so that they form two possible pathways for electron transfer across the membrane, one on each side of the symmetry axis. [Pg.237]

As with Complex 1, passage of electrons through the Q cycle of Complex 111 is accompanied by proton transport across the inner mitochondrial membrane. The postulated pathway for electrons in this system is shown in Figure 21.12. A large pool of UQ and UQHg exists in the inner mitochondrial membrane. The Q cycle is initiated when a molecule of UQHg from this pool diffuses to a site (called Q, ) on Complex 111 near the cytosolic face of the membrane. [Pg.687]

Why has nature chosen this rather convoluted path for electrons in Complex 111 First of all. Complex 111 takes up two protons on the matrix side of the inner membrane and releases four protons on the cytoplasmic side for each pair of electrons that passes through the Q cycle. The apparent imbalance of two protons in ior four protons out is offset by proton translocations in Complex rV, the cytochrome oxidase complex. The other significant feature of this mechanism is that it offers a convenient way for a two-electron carrier, UQHg, to interact with the bj and bfj hemes, the Rieske protein Fe-S cluster, and cytochrome C, all of which are one-electron carriers. [Pg.688]

The mitochondrial complex that carries out ATP synthesis is called ATP synthase or sometimes FjFo-ATPase (for the reverse reaction it catalyzes). ATP synthase was observed in early electron micrographs of submitochondrial particles (prepared by sonication of inner membrane preparations) as round, 8.5-nm-diameter projections or particles on the inner membrane (Figure 21.23). In micrographs of native mitochondria, the projections appear on the matrixfacing surface of the inner membrane. Mild agitation removes the particles from isolated membrane preparations, and the isolated spherical particles catalyze ATP hydrolysis, the reverse reaction of the ATP synthase. Stripped of these particles, the membranes can still carry out electron transfer but cannot synthesize ATP. In one of the first reconstitution experiments with membrane proteins, Efraim Racker showed that adding the particles back to stripped membranes restored electron transfer-dependent ATP synthesis. [Pg.694]

The presence of polymer, solvent, and ionic components in conducting polymers reminds one of the composition of the materials chosen by nature to produce muscles, neurons, and skin in living creatures. We will describe here some devices ready for commercial applications, such as artificial muscles, smart windows, or smart membranes other industrial products such as polymeric batteries or smart mirrors and processes and devices under development, such as biocompatible nervous system interfaces, smart membranes, and electron-ion transducers, all of them based on the electrochemical behavior of electrodes that are three dimensional at the molecular level. During the discussion we will emphasize the analogies between these electrochemical systems and analogous biological systems. Our aim is to introduce an electrochemistry for conducting polymers, and by extension, for any electrodic process where the structure of the electrode is taken into account. [Pg.312]

The reductase in Geobacter sulfurreducens is located in the outer membrane and a soluble Fe(III) reductase has been characterized from cells grown anaerobically with acetate as electron donor and Fe(III) citrate or fumarate as electron acceptor (Kaufmann and Lovley 2001). The enzyme contained Fe, acid-labile S, and FAD. An extracellular c-type cytochrome is distributed in the membranes, the periplasm, and the medium, and functions as a reductase for electron transfer to insoluble iron hydroxides, sulfur, or manganese dioxide (Seeliger et al. 1998). [Pg.165]

An extraordinary way of stabilizing RUO2-coated CdS colloids for H2 generation was chosen by Fendler and co-workers The colloidal particles were generated in situ in surfactant vesicles of dioctadecyldimethylammonium chloride and dihexa-decyl phosphate. Thiophenol as a membrane permeable electron donor acted as a sacrificial additive. Later, a surface active re-usable electron donor (n-C,gH3,)2N — (CHj)—CH2—CHj—SH, Br was incorporated into the vesicles. Its R—SS—R oxidation product could be chemically reduced by NaBH to regenerate the active electron donor. The H2 yields in these systems were only 0.5 %. However, yields up to 10% were later reported for a system in which CdS was incorporated into a polymerizable styrene moiety, (n-C,jH3jC02(CH2)2) N (CH3) (CH2CgH4CH=CH2>, CP, and benzyl alcohol was used as the electron donor. [Pg.136]

Figure 18.4 Structures of heme/Cu oxidases at different levels of detail, (a) Position of the redox-active cofactors relative to the membrane of CcO (left, only two obligatory subunits are shown) and quinol oxidase (right), (b) Electron transfer paths in mammalian CcO. Note that the imidazoles that ligate six-coordinate heme a and the five-coordinate heme are linked by a single amino acid, which can serve as a wire for electron transfer from ferroheme a to ferriheme as. (c) The O2 reduction site of mammalian CcO the numbering of the residues corresponds to that in the crystal structure of bovine heart CcO. The subscript 3 in heme as and heme 03 signifies the heme that binds O2. The structures were generated using coordinates deposited in the Protein Data Bank, lari [Ostermeier et al., 1997] Ifft [Abramson et al., 2000] (a) and locc [Tsukihara et al., 1996] (b, c). Figure 18.4 Structures of heme/Cu oxidases at different levels of detail, (a) Position of the redox-active cofactors relative to the membrane of CcO (left, only two obligatory subunits are shown) and quinol oxidase (right), (b) Electron transfer paths in mammalian CcO. Note that the imidazoles that ligate six-coordinate heme a and the five-coordinate heme are linked by a single amino acid, which can serve as a wire for electron transfer from ferroheme a to ferriheme as. (c) The O2 reduction site of mammalian CcO the numbering of the residues corresponds to that in the crystal structure of bovine heart CcO. The subscript 3 in heme as and heme 03 signifies the heme that binds O2. The structures were generated using coordinates deposited in the Protein Data Bank, lari [Ostermeier et al., 1997] Ifft [Abramson et al., 2000] (a) and locc [Tsukihara et al., 1996] (b, c).

See other pages where Membranes for Electronics is mentioned: [Pg.271]    [Pg.273]    [Pg.275]    [Pg.277]    [Pg.279]    [Pg.281]    [Pg.283]    [Pg.285]    [Pg.287]    [Pg.289]    [Pg.291]    [Pg.293]    [Pg.295]    [Pg.368]    [Pg.298]    [Pg.155]    [Pg.271]    [Pg.273]    [Pg.275]    [Pg.277]    [Pg.279]    [Pg.281]    [Pg.283]    [Pg.285]    [Pg.287]    [Pg.289]    [Pg.291]    [Pg.293]    [Pg.295]    [Pg.368]    [Pg.298]    [Pg.155]    [Pg.507]    [Pg.258]    [Pg.691]    [Pg.243]    [Pg.360]    [Pg.295]    [Pg.34]    [Pg.121]    [Pg.126]    [Pg.141]    [Pg.343]    [Pg.179]    [Pg.284]    [Pg.153]    [Pg.53]    [Pg.29]    [Pg.224]    [Pg.480]    [Pg.190]    [Pg.331]    [Pg.276]    [Pg.323]    [Pg.70]    [Pg.226]    [Pg.190]   


SEARCH



Electron Transport Creates an Electrochemical Potential Gradient for Protons across the Inner Membrane

Electron membrane

© 2024 chempedia.info