Membrane permeability chemical reaction

Danesi PR, Horwitz EP, Vandergrift GF, Chiarizia R, Mass transfer rate through liquid membranes Interfacial chemical reactions and diffusion as simultaneous permeability controlling factors. Sep. Sci. Technol. 1981 16 201-210. 

Figure 3.8 Vessel with semi permeable membrane and chemical reaction 2A B,...

In special cases (as in colloidal solutions) some particles can be considered as essential and other particles as irrelevant , but in most cases the essential space will itself consist of collective degrees of freedom. A reaction coordinate for a chemical reaction is an example where not a particle, but some function of the distance between atoms is considered. In a simulation of the permeability of a lipid bilayer membrane for water [132] the reaction coordinate was taken as the distance, in the direction perpendicular to the bilayer, between the center of mass of a water molecule and the center of mass of the rest of the system. In proteins (see below) a few collective degrees of freedom involving all atoms of the molecule, describe almost all the... 

In principle the ISO-NOP sensor works as follows. The sensor is immersed in a solution containing NO and a positive potential of —860 mV (vs Ag/AgCl reference electrode) is applied. NO diffuses across the gas permeable/NO-selective membrane and is oxidized at the working electrode surface producing a redox current. This oxidation proceeds via an electrochemical reaction followed by a chemical reaction. The electrochemical reaction is a one-electron transfer from the NO molecule to the electrode, resulting in the formation of the nitrosonium cation ... 

In order to interpret the physicochemical steps of retinal transduction as well as membrane excitability, we analyze macroscopic properties of membranes within biological components. Such membranes separate two aqueous ionic phases the chemical compositions of which are kept constant separately. The total flux through the membrane is directly deduced from the counterbalance quantities in order to maintain the involved thermodynamical affinities constant. From such measurement, we calculate the dynamical membrane permeability. This permeability depends not only on membrane structure but also on internal chemical reactions. 

Transformed Gibbs Energy of a Two-Phase System with a Chemical Reaction and a Membrane Permeable by a Single Ion... 

TRANSFORMED GIBBS ENERGY OF A TWO-PHASE SYSTEM WITH A CHEMICAL REACTION AND A MEMBRANE PERMEABLE BY A SINGLE ION... 

Gas sensors usually incorporate a conventional ion-selective electrode surrounded by a thin film of an intermediate electrolyte solution and enclosed by a gas-permeable membrane. An internal reference electrode is usually included, so that the sensor represents a complete electrochemical cell. The gas (of interest) in the sample solution diffuses through the membrane and comes to equilibrium with the internal electrolyte solution. In the internal compartment, between the membrane and the ion-selective electrode, the gas undergoes a chemical reaction, consuming or forming an ion to be detected by the ion-selective electrode. (Protonation equilibria in conjunction with a pH electrode are most common.) Since the local activity of this ion is proportional to the amount of gas dissolved in the sample, the electrode response is directly related to the concentration of the gas in the sample. The response is usually linear over a range of typically four orders of magnitude the upper limit is determined by the concentration of the inner electrolyte solution. The permeable membrane is the key to the electrode s gas selectivity. Two types of polymeric material, microporous and homogeneous, are used to form the... 

They separate the cell from its environment, and they separate the different parts of the cell from each other, thus allowing certain activities to occur independently. Thus, a membrane is a physical barrier that, given the appropriate selective permeabilities, will allow the space enclosed by it to acquire and exclude useful and harmful substances, respectively, and to effect the efflux of selected compounds. Membranes also provide an environment in which chemical reactions that require nonaqueous conditions can occur. 

Transport problems in discontinuous (heterogeneous) system discuss the flows of the substance, heat, and electrical energy between two parts of the same system. These parts or phases are uniform and homogeneous. The two parts make up a closed system, although each individual part is an open system, and a substance can be transported from one part to another. There is no chemical reaction taking place in any part. Each part may contain n number of substances. For example, thermal diffusion in a discontinuous system is usually called thermal osmosis. If the parts are in different states of matter, there will be a natural interface. However, if both parts are in liquid or gas phases, then the parts are separated by a porous wall or a semi-permeable membrane. 

In mass transfer apparatus one of two processes can take place. Multicomponent mixtures can either be separated into their individual substances or in reverse can be produced from these individual components. This happens in mass transfer apparatus by bringing the components into contact with each other and using the different solubilities of the individual components in the phases to separate or bind them together. An example, which we have already discussed, was the transfer of a component from a liquid mixture into a gas by evaporation. In the following section we will limit ourselves to mass transfer devices in which physical processes take place. Apparatus where a chemical reaction also influences the mass transfer will be discussed in section 2.5. Mass will be transferred between two phases which are in direct contact with each other and are not separated by a membrane which is only permeable for certain components. The individual phases will mostly flow countercurrent to each other, in order to get the best mass transfer. The separation processes most frequently implemented are absorption, extraction and rectification. 

Pigmented Bilayer Lipid Membranes, Chlorophyll molecules have been incorporated into two types of artificial bllayer lipid membrane systems for the study of photoenergy transduction. The first consists of a planar bllayer lipid membrane (BLM) separating two aqueous solutions where photovoltaic effects can be Induced. The second system comprises liposomes which are Ideally suited for studies of photo-induced permeability, spectroscopy and chemical reactions. For more complete technical details, two pertinent publications are available (42,43). 

---