Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Medical encapsulations

Medical Sources. All medical encapsulations are done in a facility which consists of a series of five interconnected stainless steel boxes which provide primary containment of process equipment and materials. Interconnections include transfer ports, drop-through tubes, and ventilation ducts. Each containment enclosure has a floor area of 1.52 m x 0.91 m the floor level is 0.76 m above the building floor. A pair of master-slave manipulators serve each containment box. A closed circuit television system and a telescope are provided for close-up viewing of incell operations and can be moved from cell to cell as needed. General arrangement of the facility is shown in Figures 13 and 14. [Pg.269]

However, it has to be realized that biological templates remain inserted in the final nanoparticles and this is not acceptable for many applications. Nevertheless, some recent examples indicate that such biomimetic materials may be suitable for the design of biotechnological and medical devices [32]. For instance, it was shown that silica gels formed in the presence of p-R5 were excellent host matrices for enzyme encapsulation [33]. In parallel, biopolymer/silica hybrid macro-, micro- and nanocapsules were recently obtained via biomimetic routes and these exhibit promising properties for the design of drug delivery materials (see Section 3.1.1) [34,35],... [Pg.163]

Similarly to the phospholipid polymers, the MPC polymers show excellent biocompatibility and blood compatibility [43—48]. These properties are based on the bioinert character of the MPC polymers, i.e., inhibition of specific interaction with biomolecules [49, 50]. Recently, the MPC polymers have been applied to various medical and pharmaceutical applications [44-47, 51-55]. The crosslinked MPC polymers provide good hydrogels and they have been used in the manufacture of soft contact lenses. We have applied the MPC polymer hydrogel as a cell-encapsulation matrix due to its excellent cytocompatibility. At the same time, to prepare a spontaneously forming reversible hydrogel, we focused on the reversible covalent bonding formed between phenylboronic acid and polyol in an aqueous system. [Pg.147]

The protection of microelectronics from the effects of humidity and corrosive environments presents especially demanding requirements on protective coatings and encapsulants. Silicone polymers, epoxies, and imide resins are among the materials that have been used for the encapsulation of microelectronics. The physiological environment to which implanted medical electronic devices are exposed poses an especially challenging protection problem. In this volume, Troyk et al. outline the demands placed on such systems in medical applications, and discuss the properties of a variety of silicone-based encapsulants. [Pg.13]

In recent years there have been a range of recommendations regarding the structure of publications how they should be laid out and what they should contain. These have usually been in the form of checklists and all of this has been encapsulated within the CONSORT statement (Moher et al. (2001) and Altman et al. (2001)). CONSORT is an acronym for Consolidated Standards of Reporting Trials and increasingly many medical journals have adopted this guidance in terms of requiring their clinical trial publications to conform to it. There is a web site which provides up-to-date information and helpful resources and examples WWW. consort- statement.org. [Pg.257]

The same authors developed a process of encapsulation of polymers swelled by halogenated solvents in which ozone is greatly soluble but not monomers to be grafted. After ozonization of polymers swelled in solvents, mixtures of mono unsaturated or di unsaturated monomers are added to the activated polymers. Then, grafting is operated by UV irradiation. Grafting is mainly located at the surface of the starting polymer what prevents the modification of its intrinsic properties. This process permits to produce hydrophilic polysiloxanes used in medical applications (contact lenses, tubes, catheters, etc.). [Pg.67]

Polyurethanes are part of a very versatile group of materials that find uses in a wide range of applications, both domestic and industrial. Polyurethanes are widely used in many applications such as paints and lacquers, foam mattresses, medical implants, and industrial applications such as rollers, electrical encapsulation, engineering components, shoe soles, seals, and in the mining industry. [Pg.265]


See other pages where Medical encapsulations is mentioned: [Pg.254]    [Pg.208]    [Pg.273]    [Pg.141]    [Pg.372]    [Pg.316]    [Pg.208]    [Pg.210]    [Pg.212]    [Pg.451]    [Pg.367]    [Pg.299]    [Pg.143]    [Pg.155]    [Pg.117]    [Pg.181]    [Pg.140]    [Pg.680]    [Pg.382]    [Pg.131]    [Pg.300]    [Pg.300]    [Pg.300]    [Pg.312]    [Pg.174]    [Pg.133]    [Pg.19]    [Pg.135]    [Pg.71]    [Pg.50]    [Pg.11]    [Pg.183]    [Pg.208]    [Pg.1017]    [Pg.1455]    [Pg.186]    [Pg.13]    [Pg.294]    [Pg.453]    [Pg.357]    [Pg.299]    [Pg.251]   
See also in sourсe #XX -- [ Pg.252 , Pg.276 , Pg.281 ]




SEARCH



Encapsulation system, medical

Encapsulation system, medical implants

© 2024 chempedia.info