Mechanism addition/chain growth

On the other hand, butyllithium-aluminum alkyl initiated polymerizations of vinyl chloride are unaffected by free-radical inhibitors. Also, the molecular weights of the resultant polymers are unaffected by additions of CCI4 that acts as a chain-transferring agent in free-radical polymerizations. This suggests an ionic mechanism of chain growth. Furthermore, the reactivity ratios in copolymerization reactions by this catalytic system differ from those in typical free-radical polymerizations An anionic mechanism was also postulated for polymerization of vinyl chloride with t-butylmag-nesium in tetrahydrofuran. ... 

Active species in TOX polymerization are located on the surface of the growing polymer crystals. Thus, monomer molecules, when being incorporated into the polymer chain, are at the same time transferred from the liquid into the crystalline phase. This affects the thermodynamics of polymerization and introduces an additional factor in the mechanism of chain growth. 

Photoinitiation is not as important as thermal initiation in the overall picture of free-radical chain-growth polymerization. The foregoing discussion reveals, however, that the contrast between the two modes of initiation does provide insight into and confirmation of various aspects of addition polymerization. The most important application of photoinitiated polymerization is in providing a third experimental relationship among the kinetic parameters of the chain mechanism. We shall consider this in the next section. 

We begin our discussion of copolymers by considering the free-radical polymerization of a mixture of two monomers. Mi and M2. This is already a narrow view of the entire field of copolymers, since more than two repeat units can be present in copolymers and, in addition, mechanisms other than free-radical chain growth can be responsible for copolymer formation. The essential features of the problem are introduced by this simpler special case, so we shall restrict our attention to this system. 

Chain-Growth Associative Thickeners. Preparation of hydrophobically modified, water-soluble polymer in aqueous media by a chain-growth mechanism presents a unique challenge in that the hydrophobically modified monomers are surface active and form micelles (50). Although the initiation and propagation occurs primarily in the aqueous phase, when the propagating radical enters the micelle the hydrophobically modified monomers then polymerize in blocks. In addition, the hydrophobically modified monomer possesses a different reactivity ratio (42) than the unmodified monomer, and the composition of the polymer chain therefore varies considerably with conversion (57). The most extensively studied monomer of this class has been acrylamide, but there have been others such as the modification of PVAlc. Pyridine (58) was one of the first chain-growth polymers to be hydrophobically modified. This modification is a post-polymerization alkylation reaction and produces a random distribution of hydrophobic units. 

Chain growth polymers, which are often referred to as addition polymers, form via chain addition reactions. Figure 2.2 presents a generic chain addition mechanism. Chain addition occurs when the active site of a monomer or polymer chain reacts with an adjacent monomer molecule, which is added to the end of the chain and generates a new active site. The active site is the reactive end of a monomer or polymer that participates in the polymerization reaction. 

The choice of one polymerization method over another is defined by the type of monomer and the desired properties of the polymer. Table 2.1 lists advantages and disadvantages of the different chain growth mechanisms. Table 2.2 summarizes some well known addition polymers and the methods by which they can be polymerized. 

The addition of heat shifts the equilibrium concentrations away from the products and back towards the reactants, the monomers. This is one reason why processing these types of polymers is often more difficult than processing products of chain growth mechanisms. The thermal degradation process can be dramatically accelerated by the presence of the low molecular weight condensation products such as water. Polyester, as an example, can depolymerize rapidly if processed in the presence of absorbed or entrained water. 

Low viscosity (low concentration systems). Radicals are species that normally have short lifetimes (10 2s to 10 s). In the course of a chain growth mechanism (see Figure 18) they terminate by finding a second non-paired electron to build a chemical link made of an electron pair. This requires that two radicals meet, either to pair their electrons and combine (addition) or to exchange a hydrogen, leading to the formation of one saturated bond and one double bond (disproportionation). 

There are two main chemical mechanisms by which a synthetic polymer may be produced namely by either a condensation (step growth) polymerisation or addition (chain) polymerisation. 

In the presence of an organic peroxide Initiator, the alkenes and their derivatives undergo addition polymerisation or chain growth polymerisation through a free radical mechanism. Polythene, teflon, orlon, etc. are formed by addition polymerisation of an appropriate alkene or Its derivative. Condensation poiymerisation reactions are... 

The addition and condensation polymers are nowadays also referred as chain growth polymers and step growth polymers depending on the type of polymerisation mechanism they undergo during their formation. 

---