Mechanical doping

Mechanically doped impurities and the thermoelectric properties of sintered monolithic SiGe and PbTe test samples used to prepare SiGe / PbTe composite. 

Presumably two mechanisms, doping and interconnectivity of CNTs, contribute to the formation of a conductive passage way in the composite before doping. The potential interaction between highly delocalized 7i-electrons of CNTs and the n-electrons of the polymer backbone increase the effective electron delocalization and as a conse-... 

Several kinds of conduction mechanisms are operative in ceramic thermistors, resistors, varistors, and chemical sensors. Negative temperature coefficient (NTC) thermistors make use of the semiconducting properties of heavily doped transition metal oxides such as n-ty e Ti O andp-ty e... 

Resistivity measurements of doped, alpha-siUcon carbide single crystals from —195 to 725°C showed a negative coefficient of resistivity below room temperature, which gradually changed to positive above room temperature (45). The temperature at which the changeover occurred increased as the ionization of the donor impurity increased. This is beUeved to be caused by a change in conduction mechanism. 

Semiconducting Ceramics. Most oxide semiconductors are either doped to create extrinsic defects or annealed under conditions in which they become non stoichiometric. Although the resulting defects have been carefully studied in many oxides, the precise nature of the conduction is not well understood. Mobihty values associated with the various charge transport mechanisms are often low and difficult to measure. In consequence, reported conductivities are often at variance because the effects of variable impurities and past thermal history may overwhelm the dopant effects. 

Polyheterocycles. Heterocychc monomers such as pyrrole and thiophene form hiUy conjugated polymers (4) with the potential for doped conductivity when polymerization occurs in the 2, 5 positions as shown in equation 6. The heterocycle monomers can be polymerized by an oxidative coupling mechanism, which can be initiated by either chemical or electrochemical means. Similar methods have been used to synthesize poly(p-phenylenes). 

The polymers which have stimulated the greatest interest are the polyacetylenes, poly-p-phenylene, poly(p-phenylene sulphide), polypyrrole and poly-1,6-heptadiyne. The mechanisms by which they function are not fully understood, and the materials available to date are still inferior, in terms of conductivity, to most metal conductors. If, however, the differences in density are taken into account, the polymers become comparable with some of the moderately conductive metals. Unfortunately, most of these polymers also have other disadvantages such as improcessability, poor mechanical strength, instability of the doped materials, sensitivity to oxygen, poor storage stability leading to a loss in conductivity, and poor stability in the presence of electrolytes. Whilst many industrial companies have been active in their development (including Allied, BSASF, IBM and Rohm and Haas,) they have to date remained as developmental products. For a further discussion see Chapter 31. 

Chemical erosion can be suppressed by doping with substitutional elements such as boron. This is demonstrated in Fig. 14 [47] which shows data for undoped pyrolitic graphite and several grades of boron doped graphite. The mechanism responsible for this suppression may include the reduced chemical activity of the boronized material, as demonstrated by the increased oxidation resistance of B doped carbons [48] or the suppressed diffusion caused by the interstitial trapping at boron sites. 

Other mechanism for doping the tubules. Doping of the nanotubes by insertion of an intercalate species between the layers of the tubules seems unfavorable because the interlayer spacing is too small to accommodate an intercalate layer without fracturing the shells within the nanotube. 

Pseudocapacitance is used to describe electrical storage devices that have capacitor-like characteristics but that are based on redox (reduction and oxidation) reactions. Examples of pseudocapacitance are the overlapping redox reactions observed with metal oxides (e.g., RuO,) and the p- and n-dopings of polymer electrodes that occur at different voltages (e.g. polythiophene). Devices based on these charge storage mechanisms are included in electrochemical capacitors because of their energy and power profiles. 

---