Matrix assisted laser separation techniques

For non-volatile sample molecules, other ionisation methods must be used, namely desorption/ionisation (DI) and nebulisation ionisation methods. In DI, the unifying aspect is the rapid addition of energy into a condensed-phase sample, with subsequent generation and release of ions into the mass analyser. In El and Cl, the processes of volatilisation and ionisation are distinct and separable in DI, they are intimately associated. In nebulisation ionisation, such as ESP or TSP, an aerosol spray is used at some stage to separate sample molecules and/or ions from the solvent liquid that carries them into the source of the mass spectrometer. Less volatile but thermally stable compounds can be thermally vaporised in the direct inlet probe (DIP) situated close to the ionising molecular beam. This DIP is standard equipment on most instruments an El spectrum results. Techniques that extend the utility of mass spectrometry to the least volatile and more labile organic molecules include FD, EHD, surface ionisation (SIMS, FAB) and matrix-assisted laser desorption (MALD) as the last... 

In a separate study, a protocol for Matrix-assisted laser desorption-ionization (MALDI) imaging mass spectrometry (IMS) has been proposed.18 This IMS technique provides a new approach to visualize spatial distribution of thousands of molecular species, including peptides, proteins, and their metabolites in two- or three-dimensional levels. This approach may also provide a straightforward method of determining the tissue distribution of multiple peptides or proteins in a quantitative manner.18 Chu et al.19 reported a nondestructive molecular extraction method to obtain proteins from a single FFPE or frozen tissue section, without destroying the tissue morphology, such... 

Mass spectrometry is used to identify unknown compounds by means of their fragmentation pattern after electron impact. This pattern provides structural information. Mixtures of compounds must be separated by chromatography beforehand, e.g. gas chromatography/mass spectrometry (GC-MS) because fragments of different compounds may be superposed, thus making spectral interpretation complicated or impossible. To obtain complementary information about complex mixtures as a whole, it may be advantageous to have only one peak for each compound that corresponds to its molecular mass ([M]+). Even for thermally labile, nonvolatile compounds, this can be achieved by so-called soft desorption/ionisation techniques that evaporate and ionise the analytes without fragmentation, e.g. matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS). 

Analytes must be liberated from their associated solvent molecules as well as be ionized to allow mass separation. Several ionization methods enable ion production from the condensed phase and have been used for the coupling of CE to MS. Among them, atmospheric pressure ionization (API) methods, matrix-assisted laser desorption/ionization (MALDI), and inductively coupled plasma (ICP) ionization are mainly used. API techniques are undoubtedly the most widespread ionization sources and cover different analyte polarity ranges. 

Purity and homogeneity of the purified protein is assessed by macromolecular exclusion chromatography, SDS-polyacrylamide gel electrophoresis, isoelectric focusing, and matrix-assisted laser desorption/ionization-time of flight mass spectrometry. The later technique, developed by Karas and Hillenkamp, ionizes and separates proteins on the basis of their mass-to-charge ratio (Karas and ffillenkamp, 1988). 

Separation techniques in hyphenation with elucidation of the structure of organometallic compounds [electrospray ionization-mass spectrometry (ESI-MS) and matrix assisted laser desorption ionization-mass spectrometry (MALDI-MS)]... 

The use and development of high-resolving separation techniques as well as highly accurate mass spectrometers is nowadays essential to solve the proteome complexity. Currently, more than a single electrophoretic or chromatographic step is used to separate the thousands of proteins found in a biological sample. This separation step is followed by analysis of the isolated proteins (or peptides) by mass spectrometry (MS) via the so-called soft ionization techniques, such as electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) combined with the everyday more powerful mass spectrometers. Two fundamental analytical strategies can be employed the bottom-up and the top-down approach. 

Following successful recovery of peptide/protein molecule from the microspheres, a simple spectrophotometric method does not always allow discrimination between the monomeric protein form and its aggregates. However, HPLC might separate these species and thus provides more accurate qualitative data [96], But HPLC cannot quantify exclusively the amount of active protein antigen, as is the case with ELISA techniques [97], Nowadays, Fourier transform infrared (FTIR) spectroscopy has become a popular, noninvasive method, as it is able to characterize the secondary structure of entrapped proteins [26, 95, 98-101], Only recently, the integrity of their primary structure was evaluated, thanks to a new matrix-assisted laser... 

---