Materials bagged

Bag filters are perhaps the most widely used of these types of pretreatment equipment, and they are also commonly employed (and highly recommended) for sidestream application in HW boiler circuits. They are reliable and robust and tend to be available in an almost infinite number of permutations. When sizing, specification items to be considered include flow rates, vessel materials, housing and support-basket sizes, pipe sizes, connection threads and flanges, outlet positions, code and pressure ratings, gasket materials, bag shapes, bag materials, and micron ratings. 

Cross contamination of RO water in an open vial following exposure to different materials (bagged) shows a higher contamination than in a closed vial (Table 2). The greatest relative emanation occurs from concrete powder stored but it was also found (checked by triplicate experiments) that the greatest contamination of RO in vials occurred when the Kilner jars were stored in a fridge. This is a different outcome than that found with the concrete from Expt. 1... 

Dust. Particulates are a problem at many stages of the metal production process. The amount of air or oxygen that is passed through various pyrometallmgical processes invariable will kick up the fine particles in the material. Bag houses... 

Raw material bags can be stacked, say, ten bags in a row and five bags on top of each other. This makes it 50 bags per stack and it will be easy to keep track of arrival of fresh material as well as issue of raw material bags to process. 

Isolation/DisposaL Isolation involves the separation of the patient from the hazardous substance. This means first removing the patient from the hot zone and then removing the patient s clothing and jewelry. All contaminated items should be properly stored in hazardous material bags. 

Victims of chemical attack require very thorough decontamination. Use soap and lots of water for victims. Up to 10 to 15 minutes of irrigation with soap and water may be needed. The victims clothes can be a source of cross-contamination. Using hazardous material bags, double-bag all clothes. Control water runoff if possible, but do not delay decontamination of patients. When performing decontamination you must wear protective clothing, respiratory protection of at least Level C, and a fuU-face hood or shield. 

Have them remove their clothing, jewelry, and other items, including footwear and underwear, and place them in appropriate hazardous material bags that are labeled with the patient s name (Doff-it kits are good here). If at all possible, separate male and female patients during decontamination to respect modesty. You should be in Level B attire unless It has been determined that Level C is adequate (Figure S2.3). 

Figure S2.4 Patient showering after placing clothes in hazardous materials bag.

Have them remove their clothing, footwear, underwear, and personal items. Either leave these items in place or place them in a hazardous material bag labeled with the patient s name (use Doff-it kit if available). 

Polyethylene, HDPE, MDPE. Applications injection molding for domestic parts and industrial parts blow molding for containers and sports goods extrasion for pressure pipes, pipes, electrical insulating material, bags, envelopes, and tissue. 

In order to mix efficiently, the compound must band (see Fig. 1(a)), but not stick, that is it must cling to one of the rolls. The roll to which the compoimd bands can be influenced by the friction ratio and the roll temperatures. Mixing is difficult if the material bags (see Fig. 1(b)). 

Figure 1 Two-roll mill (a) the material bands on one roll (b) the material bags instead.

Of all technical textiles, man-made fibers account for 93%, based on their physical characteristics and the flexibility that allows production of fibers exactly designed for a specific application. On a small scale (7%), natural fibers are applied in the medical field (wound padding, dressing material), as packaging material (bags), and as substitutes, as for example flax substituting asbestos. 

Filter bags for liquids are effective in removing particulate contaminants in the processing of a wide variety of materials. Bag filtration is a pressure-driven operation, wherein the product to be filtered is forced through the filter unit. Such a unit would normally consist of the filter housing, a retaining basket and the filter bag. 

---