Mass separation membranes

Membrane separator. A separator that passes gas or vapor to the mass spectrometer through a semipermeable (e.g., silicon) membrane that selectively transmits organic compounds in preference to carrier gas. Membrane separator, membrane enricher, semipermeable membrane separator, and semipermeable membrane enricher are synonymous terms. 

Definitions Following the practice presented under Gas-Separation Membranes, distillation notation is used. Literature articles often use mass fraction instead of mole fraction, but the substitution of one to the other is easily made. 

Instead of having one phase discontinuous and in the form of separate particles, it is possible to have the phase as a continuous matrix with pores of very fine dimensions running through it. This is a porous mass, or membrane, also known as a... 

The outer membranes of mitochondria can be removed from the inner membranes by osmotic rupture.13 Analyses on separated membrane fractions show that the outer membrane is less dense (density — 1.1 g / cm3) than the inner (density 1.2 g / cm3). It is highly permeable to most substances of molecular mass 10 kDa or less because of the presence of pores of 2 nm diameter. These are formed by mitochondrial porins,14-17 which are similar to the outer membrane porins of gram-negative bacteria (Fig. 8-20). The ratio of phospholipid to protein ( 0.82 on a weight basis) is much higher than in the inner membrane. Extraction of the phospholipids by acetone destroys the membrane. Of the lipids present, there is a low content of cardiolipin, a high content of phosphatidylinositol and cholesterol, and no ubiquinone. 

Mass transfer-controlled separation Membrane Permeation... 

The principles, sampling systems, control of the measuring device and application of MS for bioprocesses have been summarized by Heinzle [157,158] and Heinzle and Reuss [162]. Samples are introduced into a vacuum (< 10 5 bar) via a capillary (heated, stainless steel or fused silica, 0.3 x 1000 mm or longer) or a direct membrane inlet, for example, silicon or Teflon [72,412]. Electron impact ionization with high energy (approx. 70 eV) causes (undesired) extensive fragmentation but is commonly applied. Mass separation can be obtained either by quadrupole or magnetic instruments and the detection should be performed by (fast and sensitive) secondary electron multipliers rather than (slower and less sensitive) Faraday cups (Fig. 21). 

In some technological and medical applications protein adsorption and/or cell adhesion is advantageous, but in others it is detrimental. In bioreactors it is stimulated to obtain favourable production conditions. In contrast, biofilm formation may cause contamination problems in water purification systems, in food processing equipment and on kitchen tools. Similarly, bacterial adhesion on synthetic materials used for e.g. artificial organs and prostheses, catheters, blood bags, etc., may cause severe infections. Furthermore, biofilms on heat exchangers, filters, separation membranes, and also on ship hulls oppose heat and mass transfer and increase frictional resistance. These consequences clearly result in decreased production rates and increased costs. 

In this study, we used matrix-assisted laser desorption ionization /Mass Spectrometry (MALDI/MS) to identify the peptides released from gastric parietal cell microsomes. MALDI, because of its sensitivity and relative tolerance to the presence of salts and buffers was examined for the analysis of unfractionated proteolytic digests (9, 10). MALDI with post-source decay (PSD) analysis was used to obtain sequence information on peptides even in crude digestion mixtures. Our strategy (Figure 1) consisted of proteolysis of intact vesicles, centrifugation at high speeds to separate membrane bound and soluble fractions and analysis of the mixture of released peptides by MALDI/MS. In addition, to increase the... 

This brief overview of mass transfer and separation mechanisms involved in ceramic membrane processes will be useful not only for a better understanding of actual operating conditions of ceramic membranes, but also for anticipating future applications. For example, a same microporous membrane can serve theoretically as liquid or gas separation membrane. However, transport mechanisms and operating conditions being totally different, a good membrane permeability and selectivity in the former case cannot be systematically transposed to the second case. 

Mass-separating agent membrane which filters suspended solids based on size. Energy-separating agent gravity settling to separate particles by size. 

Process Membrane Type Driving Force Mass Separation Mechanism Area of Application... 

Although GC-methods are widely used, they are time-consuming. Rapid, sensitive online methods need to be developed, for which conventional GC techniques are not well suited. If species of interest with similar mass spectra do not need to be separated, membrane inlet mass spectrometry (MIMS) is perfectly adequate and fast. 

---