Quadrupole mass resolution

SiiH2 are completely separated from the peak. Quadrupole instruments are not usually capable of such high mass resolution. 

The choice of mass spectrometer for a particular analysis depends on the namre of the sample and the desired results. For low detection limits, high mass resolution, or stigmatic imaging, a magnetic sector-based instrument should be used. The analysis of dielectric materials (in many cases) or a need for ultrahigh depth resolution requires the use of a quadrupole instrument. 

It is very evident in Figure 3 that the chemical complexity of Hasteloy presents special problems for mass spectrometric analysis using a quadrupole mass spectrometer with low mass resolution. Molecular ions comprised of combinations of matrix and plasma atoms are formed in abundance and will obscure many elements... 

To minimize surface damage, static SIMS mass spectrometers should be as efficient as possible for detecting the total yield of secondary ions from a surface. Also, to be able to separate elemental from molecular species, and molecular species from each other, the mass resolution usually given as the mass m divided by the separable mass Am, should be very high. With this in mind, two types of mass spectrometer have been used - in early work mainly quadrupole mass filters and, more recently, time-of-flight mass spectrometers. 

Resolution Quadrupole instruments are not capable of achieving the high resolution that is common with double-focusing magnetic-sector instruments. In GC/MS analyses, a compromise is struck between sensitivity (ion transmission) and mass resolution. In the quadrupole instrument, the resolution is set to the lowest possible value commensurate with resolving peaks differing by 1 Dalton (unit resolution). 

Our SIMS data is taken using a VGQ8 quadrupole with unit mass resolution between 0-300 amu and a differentially pumped argon ion gun used in a defocused mode. A current of l-2x 10 A in a 0.S cm spot area is used. 

In general, the mass resolution required for most analyses is such that the singly charged isotope patterns of the detected ions are readily discernible. For applications involving molecular weights up to about 1500 Da, this can be provided by magnetic sector, quadrupole, and time-of-flight mass spectrometers. 

Quadrupoles are low-resolution MS instruments frequently used for molecular weight determination. QMS provides unit-mass resolution, sufficient dynamic range, good quantitation capabilities, and easy sample introduction without severe vacuum restrictions. The limited mass range (up to 4000 Da) generally does not pose problems in polymer/additive analysis. Some limitations of QMS in polymer research are ... 

ToFs can also be used in combination with other mass analysers. Both hybrid sector and quadrupole systems are available. oaToF-MS has been interfaced to a quadrupole mass filter and hexapole gas collision cell, such as to allow recording of mass spectra and product ion spectra with good mass resolution (ca. 10000), high sensitivity, high mass range (ca. 10 000 Da) and high mass accuracy (<5ppm) [177,178]. QqToFMS may be fitted with API sources with flow-rates from nL... 

Mass resolution describes the capability of an MS to distinguish ions with different m/z values. It is defined by the M/AM equation in which M is the m/z ratio of a mass peak and AM is the full width of a peak at half its maximum height. The mass resolution of an instrument often correlates with its accuracy. Mass range indicates the m/z range at which the mass analyzer best functions. For example, quadrupole mass analyzers exhibit a mass range of up to 4000 m/z, while the mass ranges of TOF extend up to 100,000. The operating principles of common MS instruments are discussed below. 

TOF analyzers are especially compatible with MALDI ion sources and hence are frequently coupled in aMALDI-TOF configuration. Nevertheless, many commercial mass spectrometers combine ESI with TOF with great success. For proteomics applications, the quadrupole TOF (QqTOF) hybrid instruments with their superior mass accuracy, mass range, and mass resolution are of much greater utility than simple TOF instruments.21,22 Moreover, TOF instruments feature high sensitivity because they can generate full scan data without the necessity for scanning that causes ion loss and decreased sensitivity. Linear mode TOF instruments cannot perform tandem mass spectrometry. This problem is addressed by hybrid instruments that incorporate analyzers with mass selective capability (e.g., QqTOF) in front of a TOF instrument. 

The helium gas in the trap not only helps in trapping the ions but also cools them (i.e., the kinetic energy of a trapped ion is dissipated through repeated collisions with the He gas), thus forcing the ions to the center of the trap where the quadrupole field is best defined. Both sensitivity and mass resolution are significantly enhanced by the presence of the He gas. Moreover, the same He can also be used to induce fragmentation when working in the MS" mode (see below). 

---