Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Michael addition malonates

Dixon et al. screened cinchonine-derived thioureas 117-120 for their performance in the dimethyl malonate Michael addition to tra s-(5-nitrostyrene in dichlo-romethane at room temperature and at -20°C [274]. As shown in Figure 6.38, all candidates revealed comparable activity, but monodentate hydrogen-bond donor 118 exhibited very low asymmetric induction producing the desired Michael... [Pg.256]

Diethyl malonate, 606 Diethyl malonate, Michael addition to vinyl pyridines,... [Pg.1211]

The Michael Addition Reaction consists in the addition of the sodio-derivative of ethyl acetoacetate, ethyl malonate or ethyl cyanoacetate to an olefine group... [Pg.277]

The addition of active methylene compounds (ethyl malonate, ethyl aoeto-acetate, ethyl plienylacetate, nltromethane, acrylonitrile, etc.) to the aP-double bond of a conjugated unsaturated ketone, ester or nitrile In the presence of a basic catalyst (sodium ethoxide, piperidine, diethylamiiie, etc.) is known as the Michael reaction or Michael addition. The reaction may be illustrated by the addition of ethyl malonate to ethyl fumarate in the presence of sodium ethoxide hydrolysis and decarboxylation of the addendum (ethyl propane-1 1 2 3-tetracarboxylate) yields trlcarballylic acid ... [Pg.912]

In the above reaction one molecular proportion of sodium ethoxide is employed this is Michael s original method for conducting the reaction, which is reversible and particularly so under these conditions, and in certain circumstances may lead to apparently abnormal results. With smaller amounts of sodium alkoxide (1/5 mol or so the so-called catal3rtic method) or in the presence of secondary amines, the equilibrium is usually more on the side of the adduct, and good yields of adducts are frequently obtained. An example of the Michael addition of the latter type is to be found in the formation of ethyl propane-1 1 3 3 tetracarboxylate (II) from formaldehyde and ethyl malonate in the presence of diethylamine. Ethyl methylene-malonate (I) is formed intermediately by the simple Knoevenagel reaction and this Is followed by the Michael addition. Acid hydrolysis of (II) gives glutaric acid (III). [Pg.912]

The decarboxylation of allyl /3-keto carboxylates generates 7r-allylpalladium enolates. Aldol condensation and Michael addition are typical reactions for metal enolates. Actually Pd enolates undergo intramolecular aldol condensation and Michael addition. When an aldehyde group is present in the allyl fi-keto ester 738, intramolecular aldol condensation takes place yielding the cyclic aldol 739 as a main product[463]. At the same time, the diketone 740 is formed as a minor product by /3-eIimination. This is Pd-catalyzed aldol condensation under neutral conditions. The reaction proceeds even in the presence of water, showing that the Pd enolate is not decomposed with water. The spiro-aldol 742 is obtained from 741. Allyl acetates with other EWGs such as allyl malonate, cyanoacetate 743, and sulfonylacetate undergo similar aldol-type cycliza-tions[464]. [Pg.392]

Stabilized anions exhibit a pronounced tendency to undergo conjugate addition to a p unsaturated carbonyl compounds This reaction called the Michael reaction has been described for anions derived from p diketones m Section 18 13 The enolates of ethyl acetoacetate and diethyl malonate also undergo Michael addition to the p carbon atom of a p unsaturated aldehydes ketones and esters For example... [Pg.901]

Section 21 9 Michael addition of the enolate ions derived from ethyl acetoacetate and diethyl malonate provides an alternative method for preparing their a alkyl derivatives... [Pg.907]

A commercially important outlet in the fragrance industry is the methyl dihydrojasmonate [24851-98-7] (26) which is made by Michael addition of a malonate to 2-pentyl-2-cyclopenten-l-one [91791 -21 -8] (52) and which is used in perfumery for blossom fragrances, particularly jasmine (see Perfumes). [Pg.470]

Incorporation of a carbonyl group into the alkyl side chain also proved compatible with biologic activity. The key intermediate (76) is obtainable by Michael addition of the anion from diethyl malonate to methylvinyl ketone followed by ketalization with ethylene glycol. Condensation of 76 with hydrazobenzene leads to the pyrazolodione hydrolysis of the ketal group affords ketasone (78). ... [Pg.237]

The application of 3-aminopropyl phosphine (3) [41,46] as a building block for incorporation into -COOH functionalized frameworks provides an excellent example of the utility of preformed primary phosphine frameworks (Scheme 8) [46]. The reactions involved Michael addition of ferf-butyl acrylate to malonic acid dimethyl ester to produce the intermediate adduct, 2-methoxycarbonyl-pentanedioc acid 5-ferf-butyl ester 1-methyl ester, which upon treatment with trifluro-acetic acid (TFA) produced the corresponding diester acid,2-methoxy-carbonyl-pentanedioic acid 1-methyl ester, in near quantitative yield. It is remarkable to note that the reaction of NH2(CH2)3PH2 (3) with the diester acid is highly selective as the -COOH group remained unattacked whereas the reaction occurred smoothly and selectively at the -COOMe groups to pro-... [Pg.128]

Example The lactone (8>, needed for a natural product synthesis, might be made from (6) via epoxide (7) and so a synthesis for (6) was required. Wittlg disconnection reveals a 1,5-dicarbonyl compound (9), best made by Michael addition of a substituted malonate (11) to enone (10). The enone was made by the simple but reliable Grignard route rather than risking a Mannich reaction of unknown regloselectivity. [Pg.234]

Diester (20) could be made by the usual 1,5-dicarbonyl route involving Michael addition to (21), but we can use its symmetry to devise an alternative route from malonate adduct (22). [Pg.405]

A Knoevenagel condensation/Michael addition sequence has been reported by Barbas III and coworkers (Scheme 2.70) [158] using benzaldehyde, diethyl malonate, and acetone in the presence of the chiral amine (S)-l-(2-pyrrolidinyl-methyl)-pyrrolidine (2-301). As the final product the substituted malonate 2-302 was isolated in 52% yield with 49% ee. [Pg.93]

Michael addition has been shown to lead to useful building blocks. According to a publication by Johnson and coworkers, highly functionalized unsymmetrical malonic acid derivatives are accessible in this way [268]. Moreover, as described by Takeda and coworkers, substituted four- to six-membered carbocycles 2-507 can be prepared starting from 2-504 by reaction with PhLi via the intermediates 2-505 and 2-506 (Scheme 2.115) [269]. [Pg.127]

The group ofWalborsky probably has described one of the first true anionic/radi-cal domino process in their synthesis of the spirocyclopropyl ether 2-733 starting from the tertiary allylic bromide 2-730 (Scheme 2.161) [369]. The first step is a Michael addition with methoxide which led to the malonate anion 2-731. It follows a displacement of the tertiary bromide and a subsequent ring closure which is thought to involve a SET from the anionic center to the carbon-bromine anti bonding orbital to produce the diradical 2-732 and a bromide anion. An obvious alternative Sn2 halide displacement was excluded due to steric reasons and the ease with which the reaction proceeded. [Pg.159]

Decenoic acid (143), easily prepared from the same telomer 142, was cyclized via acid chloride using A1C13 to give 2-pentyl-2-cyclopentenone (144). Michael addition of methyl malonate followed by removal of one ester group produced methyl dihydrojasmonate (145) (129) ... [Pg.188]

Reactions of a,(3-unsaturated acylzirconocene chlorides with stable carbon nucleophiles (sodium salts of dimethyl malonate and malononitrile) at 0°C in THF afford the Michael addition products in good yields (Scheme 5.38). Direct treatment of the reaction mixture with allyl bromide in the presence of a catalytic amount of Cul -2LiCl (10 mol%) in THF at 0 °C gives the allylic ketone in a one-pot reaction. This sequential transformation implies the electronic nature of a,P-unsaturated acylzirconocene chloride to be of type E as shown in Scheme 5.37. [Pg.174]

The utilization of copper complexes (47) based on bisisoxazolines allows various silyl enol ethers to be added to aldehydes and ketones which possess an adjacent heteroatom e.g. pyruvate esters. An example is shown is Scheme 43[126]. C2-Symmetric Cu(II) complexes have also been used as chiral Lewis acids for the catalysis of enantioselective Michael additions of silylketene acetals to alkylidene malonates[127]. [Pg.32]

Michael additions to acceptor-substituted dienes are often followed by (spontaneous or induced) cyclizations. This was already noted by Vorlander and Groebel4 who obtained a substituted 1,3-cyclohexanedione by treatment of 6-phenyl-3,5-hexadien-2-one with diethyl malonate (equation 5). Obviously, the 1,4-addition product which is formed initially then undergoes cyclization, ester hydrolysis and decarboxylation. Similarly, reaction of methyl sorbate with methyl 4-nitrobutyrate gave the 1,6-adduct which was reductively cyclized to 6-methyl-l-azabicyclo[5.3.0]decane18 (equation 6). [Pg.648]

In the Michael addition reaction depicted in eq. [146] the diastereomeric sulfoxides 312 are formed under kinetic control conditions, therefore, the addition of sodium diethyl malonate is an irreversible process. On the contrary, addition of sodium methoxide to the sulfoxide 311 is a thermodynamically controlled process and leads to a mixture of diastereomeric ]3-methoxysulfoxides 313 in a 31 69 ratio (320). [Pg.451]

When cyclic enones were used as Michael acceptors, both malonates and acetoacetates gave impressive yields and enantioselectivities of the desired Michael addition products (Scheme 5.2Q) NMR spectra and single-crystal X-ray data supported the following ruthenium intermediate (Scheme 5.21) and transition state (Figure 5.8). [Pg.141]

Papai et al. selected as model reaction the addition of 2,4-pentanedione (acetylacetone) to trans-(R)-mtrostyvQnQ, catalyzed by the bifunctional thiourea catalyst shown in Scheme 6 [46]. The analogous Michael-addition involving dimethyl malonate and nitroethylene as substrates, and a simplified catalyst was calculated at the same level of theory by Liu et al. [47]. Himo et al. performed a density functional study on the related cinchona-thiouTQa catalyzed Henry-reaction between nitromethane and benzaldehyde [48]. [Pg.13]

The Michael additions of various carbon nucleophiles such as cyanide [15b, 22b], anions generated from nitromethane [27], ferf-butyl acetate [9], malon-ates [27] and O Donnell s glycine equivalent [541, cuprates [9,15b] or Grignard reagents [53] under copper catalysis [55] have also been reported (Scheme 24). [Pg.171]


See other pages where Michael addition malonates is mentioned: [Pg.831]    [Pg.831]    [Pg.318]    [Pg.469]    [Pg.40]    [Pg.117]    [Pg.123]    [Pg.621]    [Pg.621]    [Pg.85]    [Pg.648]    [Pg.654]    [Pg.698]    [Pg.482]    [Pg.143]    [Pg.197]    [Pg.8]    [Pg.324]    [Pg.325]    [Pg.393]   
See also in sourсe #XX -- [ Pg.3 ]

See also in sourсe #XX -- [ Pg.3 , Pg.4 ]

See also in sourсe #XX -- [ Pg.3 , Pg.4 ]




SEARCH



Diethyl malonate Michael addition to methyl vinyl ketone

Malonate, asymmetric Michael addition

Malonates additions

Malonates enantioselective Michael addition

Malonic Michael addition with

Malonic esters Michael-type addition

Michael addition malonate

Michael addition malonate

Michael addition of malonate

Michael addition reaction malonate

Michael additions of diethyl malonate

Michael additions of dimethyl malonate

Michael additions of malonates

© 2024 chempedia.info