Maleic compounds

Fumaric and maleic compounds are also suitable substrates in the rhodium-catalyzed asymmetric 1,4-addition reactions. While phosphorus-based chiral ligands, such as (/f)-binap, provide low enantioselectivity for these substrates (<51% ee), chiral diene ligands 38 and 45 are particularly effective for achieving high ee (Figures 3.39 and 3.40). 

Materials. The monomers were prepared by the Diels-Alder reaction of cyclopentadlene with the corresponding vinyl and maleic compounds. The norbornene imi-des were prepared by the reaction of norbornene dicar-boxylic acid anhydride with the corresponding amines. Liquid monomers were purified by distillation under reduced nitrogen pressure and freed from residual water... 

The Diels-Alder Reaction consists in the direct combination of a compound containing a conjugated diene system u ith a reagent which possesses a double or triple bond activated bj suitable adjacent groups. Examples of such reagents are maleic anhydride, p-benzoquinone, acraldehyde and acetylene dicarboxylic esters. Combination always occurs at the 1,4 positions of the diene system ... 

Both acids 3deld succinic acid, m.p. 185°, upon catalytic reduction (see Section 111,150), thus establishing their structures. Maleic and fumaric acids are examples of compounds exhibiting cis-trans isomerism (or geometric isomerism). Maleic acid has the cm structure since inter alia it readily 3delds the anhydride (compare Section 111,93). Fumaric acid possesses the trans structure it does not form an anhydride, but when heated to a high temperature gives maleic anhydride. 

Like butadiene, allene undergoes dimerization and addition of nucleophiles to give 1-substituted 3-methyl-2-methylene-3-butenyl compounds. Dimerization-hydration of allene is catalyzed by Pd(0) in the presence of CO2 to give 3-methyl-2-methylene-3-buten-l-ol (1). An addition reaction with. MleOH proceeds without CO2 to give 2-methyl-4-methoxy-3-inethylene-1-butene (2)[1]. Similarly, piperidine reacts with allene to give the dimeric amine 3, and the reaction of malonate affords 4 in good yields. Pd(0) coordinated by maleic anhydride (MA) IS used as a catalyst[2]. 

Furthermore, if the structural unit to be polymerized is a vinyl group, mixed reactions can be carried out with a second compound such as a vinyl derivative or maleic anhydride. 

The H NMR spectra of formic acid (HCO2H) maleic acid cis H02CCH=CHC02H) and malonic acid (HO2CCH2CO2H) are similar in that each is charactenzed by two singlets of equal intensity Match these compounds with the designations A B and C on the basis of the appro pnate H NMR chemical shift data... 

The Kleber-Colombes rigid PVC foam (253,254) is produced by compression mol ding vinyl plastisol to react and gel the compound, followed by steam expansion. The process involves mixing, mol ding, and expansion. The formulation consists of PVC, isocyanate, vinyl monomers such as styrene, anhydrides such as maleic anhydride, polymerization initiators, FC-11, and nucleators. The ingredients are mixed in a Wemer-Pfleiderer or a Baker Perkins... 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

Process Technology Evolution. Maleic anhydride was first commercially produced in the early 1930s by the vapor-phase oxidation of benzene [71-43-2]. The use of benzene as a feedstock for the production of maleic anhydride was dominant in the world market well into the 1980s. Several processes have been used for the production of maleic anhydride from benzene with the most common one from Scientific Design. Small amounts of maleic acid are produced as a by-product in production of phthaHc anhydride [85-44-9]. This can be converted to either maleic anhydride or fumaric acid. Benzene, although easily oxidized to maleic anhydride with high selectivity, is an inherently inefficient feedstock since two excess carbon atoms are present in the raw material. Various compounds have been evaluated as raw material substitutes for benzene in production of maleic anhydride. Fixed- and fluid-bed processes for production of maleic anhydride from the butenes present in mixed streams have been practiced commercially. None of these... 

Benzene-Based Catalyst Technology. The catalyst used for the conversion of ben2ene to maleic anhydride consists of supported vanadium oxide [11099-11-9]. The support is an inert oxide such as kieselguhr, alumina [1344-28-17, or sUica, and is of low surface area (142). Supports with higher surface area adversely affect conversion of benzene to maleic anhydride. The conversion of benzene to maleic anhydride is a less complex oxidation than the conversion of butane, so higher catalyst selectivities are obtained. The vanadium oxide on the surface of the support is often modified with molybdenum oxides. There is approximately 70% vanadium oxide and 30% molybdenum oxide [11098-99-0] in the active phase for these fixed-bed catalysts (143). The molybdenum oxide is thought to form either a soUd solution or compound oxide with the vanadium oxide and result in a more active catalyst (142). 

Removal of maleic and fumaric acids from the cmde malononitrile by fractional distillation is impractical because the boiling points differ only slightly. The impurities are therefore converted into high boiling compounds in a conventional reactor by means of a Diels-Alder reaction with a 1,3-diene. The volatile and nonvolatile by-products are finally removed by two vacuum distillations. The by-products are burned. The yield of malononitrile amounts to 66% based on cyanogen chloride or acetonitrile. 

Association Complexes. The unshared electron pairs of the ether oxygens, which give the polymer strong hydrogen bonding affinity, can also take part in association reactions with a variety of monomeric and polymeric electron acceptors (40,41). These include poly(acryhc acid), poly(methacryhc acid), copolymers of maleic and acryflc acids, tannic acid, naphthoHc and phenoHc compounds, as well as urea and thiourea (42—47). 

As solvents, the amyl alcohols are intermediate between hydrocarbon and the more water-miscible lower alcohol and ketone solvents. Eor example, they are good solvents and diluents for lacquers, hydrolytic fluids, dispersing agents in textile printing inks, industrial cleaning compounds, natural oils such as linseed and castor, synthetic resins such as alkyds, phenoHcs, urea —formaldehyde maleics, and adipates, and naturally occurring gums, such as shellac, paraffin waxes, rosin, and manila. In solvent mixtures they dissolve cellulose acetate, nitrocellulose, and ceUulosic ethers. 

Other preparative routes iaclude hydrogenation of succinonitdle in the presence of methylamine and hydrogenation of solutions of maleic or succinic acid and methylamine (82,83). Properties are Hsted in Table 3. l-Meth5i-2-pyrrohdinone is completely miscible with water, lower alcohols, lower ketones, ether, ethyl acetate, chloroform, and benzene. It is moderately soluble in aUphatic hydrocarbons and dissolves many organic and inorganic compounds. 

Mild acid converts it to the product and ethanol. With the higher temperatures required of the cyano compound [1003-52-7] (15), the intermediate cycloadduct is converted direcdy to the product by elimination of waste hydrogen cyanide. Often the reactions are mn with neat Hquid reagents having an excess of alkene as solvent. Polar solvents such as sulfolane and /V-m ethyl -pyrrol i don e are claimed to be superior for reactions of the ethoxy compound with butenediol (53). Organic acids, phenols, maleic acid derivatives, and inorganic bases are suggested as catalysts (51,52,54,59,61,62) (Fig. 6). 

Vitamin D2 reacted with maleic anhydride to give a mono Diels-Alder adduct, which hydrolyzed to yield a dicarboxyhc acid. Acetylation of the alcohols, esterification of carboxyHc acids, and hydrogenation gave a compound that, when ozonized, gave a saturated ketone, This molecule... 

Cyclopentadiene contains conjugated double bonds and an active methylene group and can thus undergo a Diels-Alder diene addition reaction with almost any unsaturated compound, eg, olefins, acetylene, maleic anhydride, etc. The number of its derivatives is extensive only the reactions and derivatives considered most important are discussed. 

Polyesters. Unsaturated polyester resins based on DCPD, maleic anhydride, and glycols have been manufactured for many years. At least four ways of incorporating DCPD into these resins have been described (45). The resins are mixed with a cross-linking compound, usually styrene, and final polymerization is accompHshed via a free-radical initiator such as methyl ethyl ketone peroxide. 

Dicyclopentadienedicarboxyhc acid can undergo a Diels-Alder reaction in the presence of a stoichiometric amount of a dienophile at 140—190°C to give an adduct of the monomeric acid. The yield of adduct is usually 75—95%. A large number of polyfunctional compounds are easily prepared in this manner. The reaction with maleic anhydride gives a tribasic acid. 

By virtue of their unique combination of reactivity and basicity, the polyamines react with, or cataly2e the reaction of, many chemicals, sometimes rapidly and usually exothermically. Some reactions may produce derivatives that ate explosives (eg, ethylenedinitrarnine). The amines can cataly2e a mnaway reaction with other compounds (eg, maleic anhydride, ethylene oxide, acrolein, and acrylates), sometimes resulting in an explosion. 

Additive Polyimides. Rhc ne-Poulenc s Kin el molding compound and Kerimid impregnating resin (115), Mitsubishi s BT Resins (116), and Toshiba s Imidaloy Resin (117) are based on bismaleimide (4) technology. Maleic anhydride reacts with a diamine to produce a diimide oligomer (7). Eurther reaction with additional diamine (Michael addition) yields polyaminohismaleimide prepolymer with terminal maleic anhydride double bonds. Cure is achieved by free-radical polymerization through the terminal double bonds. 

Pyridazines with a hydroxy group at an a- or y-position to a ring nitrogen atom, i.e. 3-and 4-hydroxypyridazines (4) and (5), exist predominantly in the oxo form. This conclusion is based on spectroscopic evidence from UV spectra of unsubstituted compounds and their A-methyl and O-methyl derivatives in alkaline, neutral and acidic solutions. In some instances, as for example for 6-oxo-l,6-dihydropyridazine-3-carboxamide, there is also evidence from X-ray analysis <54AX199, 63AX318). Maleic hydrazide and substituted maleic hydrazides exist in the monohydroxymonooxo form (6). 

The Michael-type addition of maleic hydrazide and other pyridazinones to activated alkenes, such as methyl acrylate, acrylonitrile, methyl vinyl ketone and other a,/3-unsatu-rated carbonyl compounds, results in the formation of mono-lV-substituted products. 

Acylation of pyridazinones and related compounds in the presence of weakly basic catalysts such as pyridine or sodium acetate produces IV-acylated products, while O-acylated products are obtained under strongly basic conditions. However, the reaction between 6-chloropyridazin-3(2//)-one with chlorocarbonates and that of maleic hydrazide with unsaturated acid chlorides or chloromethylsulfonyl chloride gives preferentially N-substituted products. 

---