Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Potassium magnesium ferrocyanide

P-galactosidase substrate PBS containing 3 mM potassium ferricyanide, 3 mM potassium ferrocyanide, and 1 mM magnesium chloride, which can be stored at +4°C for approx 2 mo. 0.5 mg/mL 5-bromo-4-chloro-3-indolyl-p-galactopyranoside (X-gal) should be added prior to use. X-gal is made up to 40 mg/mL in dimethyl formamide (DMF) and stored at -20°C in a polypropylene or glass container. [Pg.215]

Potassium magnesium ferrocyanide, K2MgFe(CN)6, is obtained in the anhydrous condition by mixing cold concentrated solutions of potassium ferrocyanide and magnesium chloride.3 After a short time a white micro-crystalline precipitate is formed, which is not affected by heating to 120° C. When moist the salt soon becomes cream-coloured, owing to slight decomposition, possibly under the influence of atmospheric carbon dioxide. [Pg.219]

The heptahydrate, 2K2MgFe(CN)6.7H20, is prepared by mixing dilute solutions of potassium ferrocyanide and magnesium chloride at the boiling-point. [Pg.219]

K4C6H6FeN603 potassium ferrocyanide trihydrate 14459-95-1 25.00 1.8500 1 2418 MgH1209S2 magnesium thiosulfate hexahydrate 13446-30-5 25.00 1.8200 1... [Pg.302]

Stain solution 5 mM potassium ferricyanide, 5 mM potassium ferrocyanide, 2 mM magnesium chloride in PBS ... [Pg.191]

Hydroxyethyl cellulose has good tolerance for dissolved electrolytes, although it may be salted out of solution when mixed with certain salt solutions. For example, the following salt solutions will precipitate a 10% w/v solution of Cellosize WP-09 and a 2% w/v solution of Cellosize WP-4400 sodium carbonate 50% and saturated solutions of aluminum sulfate ammonium sulfate chromic sulfate disodium phosphate magnesium sulfate potassium ferrocyanide sodium sulfate sodium sulfite sodium thiosulfate and zinc sulfate. [Pg.332]

Natrosol is soluble in most 10% salt solutions, excluding sodium carbonate and sodium sulfate, and many 50% salt solutions with the exception of the following aluminum sulfate ammonium sulfate diammonium phosphate disodium phosphate ferric chloride magnesium sulfate potassium ferrocyanide sodium metaborate sodium nitrate sodium sulfite trisodium phosphate and zinc sulfate. Natrosol 150 is generally more tolerant of dissolved salts than is Natrosol 250. [Pg.332]

Magnesium silicate Magnesium stearate Magnesium trisilicate D-Mannitol Microcrystalline cellulose Polydimethylsiloxane Potassium acid tartrate Potassium caprate Potassium caprylate Potassium ferrocyanide Potassium laurate Potassium myristate Potassium oleate Potassium palmitate Potassium silicate... [Pg.4817]

The addition of 0.25-2.0% calcium or magnesium carbonate, calcium silicate, or silicic acid improves the flowability. Indeed, 20 ppm of potassium ferrocyanide prevents the formation of lumps in the salt. The latter compound modifies the crystallization process of NaCl during the evaporation of salt spring water. In the presence of potassium ferrocyanide, the salt builds dendrites, which have strongly reduced volume, density and inclination to agglomerate. [Pg.983]

Gold Plating Solution (63% Potassium Ferrocyanide. 2% Potassium Gold Cyanide. 8% Sodium Cyanide) NR NR R R Magnesium Bisulfite Magnesium Carbonate Magnesium Chloride R R R NR NR R R R R R R R... [Pg.49]

Uses Of the Stassfurt salts.—The magnesium compounds in the Stassfurt salts are used for the preparation of magnesium and of its salts. The potash salts are an essential constituent of many fertilizers used in agriculture, etc. 22 and potassium chloride is the starting-point for the manufacture of the many different kinds of potassium salts used in commerce—carbonate, hydroxide, nitrate, chlorate, chromate, alum, ferrocyanide, cyanide, iodide, bromide, etc. Chlorine and bromine are extracted by electrolysis and other processes from the mother liquids obtained in the purification of the potash salts. Boric acid and borax are prepared from boracite. Caesium and rubidium are recovered from the crude carnallite and sylvite. [Pg.435]

The carbonates, sulphates, and borates are decomposed. The sulphides of the alkalies and alkaline earths are decomposed while the sulphides of arsenic, antimony, molybdenum, zinc, cadmium, tin, iron, lead, copper, mercury, and palladium are not attacked. Cobalt sulphate is not attacked, while the sulphates of the alkalies and alkaline earths are attacked and dissolved. Alkali tungstates, ammonium arsenite and arsenate, copper arsenite, ammonium magnesium arsenate, ammonium molybdate and vanadate, potassium cyanide and ferrocyanide are decomposed. Paraffin is not attacked shellac, gum arabic, gum tragacanth, copal, etc., are decomposed. Celluloid is slowly attacked. Silk paper, gun cotton, gelatin, parchment are dissolved. M. Meslans 22 has studied the esterification of alcohol by hydrofluoric acid. [Pg.134]

MAGNESIUM NITRATE or MAGNESIUM(H) NITRATE (10377-60-3) A powerful oxidizer. Reacts violently with dimethylfoimamide, reducing agents, combustible materials, fuels, organic substances, metal powders, potassium hexanitrocobalite(III) (C.I. pigment yellow), sodium acetyUde, and easily oxidizable matter. Incompatible with aluminum, ammonium hexacyanoferrate(II), ferf-butylhydroperoxide, citric acid, ethanol, ferrocyanides, hydrazinium perchlorate, isopropyl chlorocarbonate, metal phosphinates, nitrosyl perchlorate, organic azides, phosphorus, sodium thiosulfate, sulfamic acid, thiocyanates, tin(II) fluoride, and many other substances. [Pg.723]


See other pages where Potassium magnesium ferrocyanide is mentioned: [Pg.212]    [Pg.212]    [Pg.410]    [Pg.27]    [Pg.694]    [Pg.695]    [Pg.103]    [Pg.410]    [Pg.480]    [Pg.4818]    [Pg.134]    [Pg.724]    [Pg.152]    [Pg.219]    [Pg.724]    [Pg.643]    [Pg.766]    [Pg.125]    [Pg.426]    [Pg.420]   
See also in sourсe #XX -- [ Pg.219 ]




SEARCH



Ferrocyanide

Potassium ferrocyanid

© 2024 chempedia.info