Magnesium dichromate

Magnesium cyanide, 8 197 Magnesium diboride. See MgB2 entries Magnesium dichromate, molecular... 

Cs) and the magnesium dichromate hexahydrate-hexamethylenetetramine addition compound, MgCr207,6H20,2[(CH2)6N4], have been solved. 

Figure 5 Environment of the magnesium atom, with hydrogen-bond lengths (A), in magnesium dichromate hexamethylenetetramine hexahyd-rate...

Cl2H36Cr2MgN80i3, Magnesium dichromate hexamethylenetetramine hexa-hydrate, 40B, 554... 

The chromates of the alkali metals and of magnesium and calcium are soluble in water the other chromates are insoluble. The chromate ion is yellow, but some insoluble chromates are red (for example silver chromate, Ag2Cr04). Chromates are often isomorph-ous with sulphates, which suggests that the chromate ion, CrO has a tetrahedral structure similar to that of the sulphate ion, SO4 Chromates may be prepared by oxidising chromium(III) salts the oxidation can be carried out by fusion with sodium peroxide, or by adding sodium peroxide to a solution of the chromium(IIl) salt. The use of sodium peroxide ensures an alkaline solution otherwise, under acid conditions, the chromate ion is converted into the orange-coloured dichromate ion ... 

Add 4 4 g. of recrystaUised -phenylhydroxylamine to a mixture of 20 ml. of concentrated sulphuric acid and 60 g. of ice contained in a 1 litre beaker cooled in a freezing mixture. Dilute the solution with 400 ml. of water, and boil until a sample, tested with dichromate solution, gives the smell of quinone and not of nitrosobenzene or nitrobenzene (ca. 10-15 minutes). Neutralise the cold reaction mixture with sodium bicarbonate, saturate with salt, extract twice with ether, and dry the ethereal extract with anhydrous magnesium or sodium sulphate. Distil off the ether p-aminophenol, m.p. 186°, remains. The yield is 4-3 g. 

Sihcon carbide is comparatively stable. The only violent reaction occurs when SiC is heated with a mixture of potassium dichromate and lead chromate. Chemical reactions do, however, take place between sihcon carbide and a variety of compounds at relatively high temperatures. Sodium sihcate attacks SiC above 1300°C, and SiC reacts with calcium and magnesium oxides above 1000°C and with copper oxide at 800°C to form the metal sihcide. Sihcon carbide decomposes in fused alkahes such as potassium chromate or sodium chromate and in fused borax or cryohte, and reacts with carbon dioxide, hydrogen, ak, and steam. Sihcon carbide, resistant to chlorine below 700°C, reacts to form carbon and sihcon tetrachloride at high temperature. SiC dissociates in molten kon and the sihcon reacts with oxides present in the melt, a reaction of use in the metallurgy of kon and steel (qv). The dense, self-bonded type of SiC has good resistance to aluminum up to about 800°C, to bismuth and zinc at 600°C, and to tin up to 400°C a new sihcon nitride-bonded type exhibits improved resistance to cryohte. 

The Dow No. 7 treatment, popular in the USA, also falls within this class. The process differs from other chromate treatments in that the activator, magnesium fluoride, is formed on the metal surface by immersion in 20% hydrofluoric acid solution, the parts then being immersed in a 10-15% alkali dichromate solution with or without sufficient alkaline earth fluoride to saturate it. A slow action occurs on the surface and the fluoride film is replaced by a chromate or mixed chromate/fluoride film. 

Modification of the burning rates, pressure exponents, and temp coefficients of burning rate of the fluorocarbon composites has been accomplished with copper, lead, tin, sodium, ammonium and potassium fluoborates sodium, potassium, lithium, lead, copper and calcium fluorides potassium and ammonium dichromate lead and zinc stearate cesium carbonate potassium and ammonium sulfate copper chromite oxides of magnesium, copper and manganese boron zinc dust and carbon black (Ref 75)... 

MATERIALS Aluminum filings, powder or flakes, or magnesium filings or powder, plus any one of the following chemicals potassium nitrate, sodium nitrate, barium nitrate, potassium dichromate, sodium dichromate, or potassium permanganate. Although aluminum and magnesium are... 

A simple two-step protocol for the generation of a terminal diene is to add allyl magnesium bromide to an aldehyde or a ketone and subsequent acid or base catalysed dehydration (equation 34)72. Cheng and coworkers used this sequence for the synthesis of some indole natural products (equation 35)72a. Regiospecific dienones can be prepared by 1,2-addition of vinyllithium to a,/l-unsaturated carbonyl compounds and oxidative rearrangement of the resulting dienols with pyridinium dichromate (equation 36)73. 

Bis(benzene)chromium dichromate, 3851 Calcium chromate, 3926 Copper chromate oxide, 4223 Dibismuth dichromium nonaoxide, 0232 Lead chromate, 4243 Lithium chromate, 4236 Magnesium permanganate, 4691 Potassium dichromate, 4248 Potassium permanganate, 4647 Sodium dichromate, 4250 Sodium molybdate, 4713 Sodium permanganate, 4703 Zinc permanganate, 4710... 

The effect of humidity on combustibility of various mixtures of organic matter and sodium chlorate was studied. Addition of a proportion of hygroscopic material (calcium or magnesium chlorides) effectively reduces the hazard. Similar effects were found for sodium dichromate and barium chlorate. 

The mixture of alcohols is placed in a 1000-mL round-bottomed flask, dissolved in 300 mL of ether, and cooled to 0°C. To this solution is added via an addition funnel over a 30-min period a mixture of sodium dichromate dihydrate (27.5 g, 0.092 mol), 100 mL of water, and 10.2 mL of coned sulfuric acid. The mixture is stirred at 0°C for 1 hr, warmed to room temperature where stirring is maintained overnight, diluted with 200 mL of water, and poured into a separatory funnel. The layers are separated and the aqueous phase is extracted with ether (3 x 200 mL). The combined organic layers are washed with saturated sodium bicarbonate solution (200 mL) and brine (200 mL), dried over anhydrous magnesium sulfate, filtered, and concentrated by rotary evaporation to give 16.8-17.8 g (61-65%) of verbenone (Note 7). Final purification is achieved by distillation of the oil through a 5-in Vigreux column at reduced pressure (dry ice-acetone cooled receiver) 13.1 g (47%), bp 108-110°C (5 mm) (Note 8). 

Berube Complexation of a planar dye (rhodamine, eosin or fluorescein) with a metal salt (potassium dichromate, barium chromate, magnesium chloride, or calcium chloride)... 

---