Low molecular weight solid additive

Carboxylic nitrile liquid and solid elastomers are used to prepare elastomer-modified epoxy liquid and solid resins when it is desirable to have the modifier in the epoxy portion of the system. This is effected through alkyl-hydroxy esterification reactions. This is covered in the literature for uncatalyzed liquid resins (9), for tert-amine catalyzed systems (10), for tert-phosphine catalyzed systems (11), for low molecular weight solid resins advanced from the liquid state (12) and for liquid and solid resins where an additional rubber vulcanization step is carried out in addition to the alkylhydroxy ester adducting step (13). Such adduct preparations offer formulation stability with a wide range of hardener types amines, anhydrides, catalytic, Lewis acids/bases. 

Polymer modification through additives is ultimately related to the affinity of the additive to the matrix which is controlled by physical and chemical interactions. The selection of mixing configuration which in turn, depends on the nature of the additive (low viscosity liquid, low molecular weight solid, melt, liquid) also affects the performance of the additive. Additives forming distinct dispersed morphologies may be deformable or rigid... 

In conclusion, it may be said that a lot of literature has been published that favors the Frye and Horst mechanism of stabilization. Most of this is based on studies done on low-molecular weight model compound for al-lylicchlorines in PVC, i.e., 4-chloro-2-hexene. Although the large contribution of these studies toward understanding the mechanism of stabilization of PVC cannot be denied, the extrapolation of these results to the processes involved in the actual stabilization of the polymer should be done with extreme care. The polymer represents a complex mixture of macromolecules, which in the melt is not only physically a very different system compared to the low-molecular weight model compound, but invariably contains, apart from stabilizers, other additives, such as plasticizers, lubricants, processing aids, etc., that further complicate the situation. The criticism of the Frye and Horst mechanism is also based on solid experimental evidence, and hence, the controversy is still very much alive. 

SFE has been used extensively in the analysis of solid polymers. Supercritical fluid extraction of liquid samples is undertaken less widely because dissolution or entrainment of the matrix can occur. As illustrated elsewhere SFE has also been applied for the analysis of liquid poly(alkylene glycol) (PAG) lubricants and sorbitan ester formulations [370]. The analysis of PAG additives (antioxidants, biocides and anticorrosion, antiwear and antifoaming agents) is hindered by the presence of the low molecular weight PAG matrix (liquid) and therefore a method for the selective separation of additives from PAG is required. The PAG... 

Fluid loss additives such as solid particles and water-thickening polymers may be added to the drilling mud to reduce fluid loss from the well bore to the formation. Insoluble and partially soluble fluid loss additives include bentonite and other clays, starch from various sources, crushed walnut hulls, lignite treated with caustic or amines, resins of various types, gilsonite, benzoic acid flakes, and carefully sized particles of calcium borate, sodium borate, and mica. Soluble fluid loss additives include carboxymethyl cellulose (CMC), low molecular weight hydroxyethyl cellulose (HEC), carboxy-methYlhydroxyethyl cellulose (CMHEC), and sodium acrylate. A large number of water-soluble vinyl copolymers and terpolymers have been described as fluid loss additives for drilling and completion fluids in the patent literature. However, relatively few appear to be used in field operations. 

Uncured resins are oligomers of relatively low molecular weight that may be a liquid or a solid. Before epoxy resins can become useful products, they must be cured, with the addition of a curing agent. Curing involves the cross-linkage by polymerization of the reactive epoxy groups into a three-dimensional matrix. 

---