Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Liquid phase molecular systems Monte Carlo simulation

This article reviews progress in the field of atomistic simulation of liquid crystal systems. The first part of the article provides an introduction to molecular force fields and the main simulation methods commonly used for liquid crystal systems molecular mechanics, Monte Carlo and molecular dynamics. The usefulness of these three techniques is highlighted and some of the problems associated with the use of these methods for modelling liquid crystals are discussed. The main section of the article reviews some of the recent science that has arisen out of the use of these modelling techniques. The importance of the nematic mean field and its influence on molecular structure is discussed. The preferred ordering of liquid crystal molecules at surfaces is examined, along with the results from simulation studies of bilayers and bulk liquid crystal phases. The article also discusses some of the limitations of current work and points to likely developments over the next few years. [Pg.41]

The lattice gas has been used as a model for a variety of physical and chemical systems. Its application to simple mixtures is routinely treated in textbooks on statistical mechanics, so it is natural to use it as a starting point for the modeling of liquid-liquid interfaces. In the simplest case the system contains two kinds of solvent particles that occupy positions on a lattice, and with an appropriate choice of the interaction parameters it separates into two phases. This simple version is mainly of didactical value [1], since molecular dynamics allows the study of much more realistic models of the interface between two pure liquids [2,3]. However, even with the fastest computers available today, molecular dynamics is limited to comparatively small ensembles, too small to contain more than a few ions, so that the space-charge regions cannot be included. In contrast, Monte Carlo simulations for the lattice gas can be performed with 10 to 10 particles, so that modeling of the space charge poses no problem. In addition, analytical methods such as the quasichemical approximation allow the treatment of infinite ensembles. [Pg.165]

Most liquid phase molecular simulations with explicit atomic polarizabilities are performed with MD rather than MC techniques. This is due to the fact that, despite its general computational simplicity, MC with explicit polarization [173, 174] requires that Eq. (9-21) be solved every MC step, when even one molecule in the system is moved, and the number of configurations in an average Monte Carlo computation is orders of magnitude greater than in a MD simulation. For nonpolarizable, pairwise-additive models, MC methods can be efficient because only the... [Pg.236]

Semiclassical techniques like the instanton approach [211] can be applied to tunneling splittings. Finally, one can exploit the close correspondence between the classical and the quantum treatment of a harmonic oscillator and treat the nuclear dynamics classically. From the classical trajectories, correlation functions can be extracted and transformed into spectra. The particular charm of this method rests in the option to carry out the dynamics on the fly, using Born Oppenheimer or fictitious Car Parrinello dynamics [212]. Furthermore, multiple minima on the hypersurface can be treated together as they are accessed by thermal excitation. This makes these methods particularly useful for liquid state or other thermally excited system simulations. Nevertheless, molecular dynamics and Monte Carlo simulations can also provide insights into cold gas-phase cluster formation [213], if a reliable force field is available [189]. [Pg.24]

The first indications that certain systems might violate the phase rule came from computer simulations of small clusters of atoms. A number of studies revealed clearly defined solid-like and liquid-like forms [5-14]. These embraced both molecular dynamics and Monte Carlo simulations, and explored a variety of clusters. These included several based on atomic models with interparticle Lennard-Jones forces, which mimic rare gas clusters rather well. There were also models of alkali halide clusters. Hence, the existence of solid and liquid forms for such small systems seemed not only plausible but general, not restricted to any one kind of system. Shortly after these studies appeared, another, of a 55-atom cluster with Lennard-Jones interparticle forces, showed not only solid and liquid forms but also a form in which the surface of the cluster (with icosahedral structure) is liquid... [Pg.222]

Abstract The use of configurational-bias Monte Carlo simulations in tbe Gibbs ensemble allows for the sampling of phenomena that occur on vastly different time and length scales. In this review, applications of this simulation approach to probe retention in gas and reversed-phase liquid chromatographic systems are discussed. These simulations provide an unprecedented view of the retention processes at the molecular-level and show excellent agreement with experimental retention data. [Pg.181]

Molecular simulations have been used to obtain thermodynamic properties and phase equilibria data of ionic liquid systems (i) Monte Carlo simulation techniques were employed to predict the solubility of gases and water in ionic liquids and (ii) molecular dynamics simulations were used to investigate the solvation dynamics of water and various organics in ionic liquids. ... [Pg.379]

Force fields split naturally into two main classes all-atom force fields and united atom force fields. In the former, each atom in the system is represented explicitly by potential functions. In the latter, hydrogens attached to heavy atoms (such as carbon) are removed. In their place single united (or extended) atom potentials are used. In this type of force field a CH2 group would appear as a single spherical atom. United atom sites have the advantage of greatly reducing the number of interaction sites in the molecule, but in certain cases can seriously limit the accuracy of the force field. United atom force fields are most usually required for the most computationally expensive tasks, such as the simulation of bulk liquid crystal phases via molecular dynamics or Monte Carlo methods (see Sect. 5.1). [Pg.43]

The rapid rise in computer speed over recent years has led to atom-based simulations of liquid crystals becoming an important new area of research. Molecular mechanics and Monte Carlo studies of isolated liquid crystal molecules are now routine. However, care must be taken to model properly the influence of a nematic mean field if information about molecular structure in a mesophase is required. The current state-of-the-art consists of studies of (in the order of) 100 molecules in the bulk, in contact with a surface, or in a bilayer in contact with a solvent. Current simulation times can extend to around 10 ns and are sufficient to observe the growth of mesophases from an isotropic liquid. The results from a number of studies look very promising, and a wealth of structural and dynamic data now exists for bulk phases, monolayers and bilayers. Continued development of force fields for liquid crystals will be particularly important in the next few years, and particular emphasis must be placed on the development of all-atom force fields that are able to reproduce liquid phase densities for small molecules. Without these it will be difficult to obtain accurate phase transition temperatures. It will also be necessary to extend atomistic models to several thousand molecules to remove major system size effects which are present in all current work. This will be greatly facilitated by modern parallel simulation methods that allow molecular dynamics simulations to be carried out in parallel on multi-processor systems [115]. [Pg.61]

The study of simple liquids can be said to be the beginning of Molecular Dynamics and Monte Carlo in the 1950s and 60s. Although the scope of molecular simulation, as a field or discipline, has widened dramatically since then, there is nevertheless a continual interest in simple liquids. In fact, this is partly due to the fact that the so-called simple liquids are far from simple One of the motivations for the continual interest in the simple liquids is that, because of the basic nature of the interparticle interactions, an improved understanding of these systems should lead to better theoretical models, which can be extended to more complex molecular liquids. Also, the rapid growth of interest in colloids and polymers (so-called complex liquids) in recent years has provided new areas where the theories of simple liquids can be applied, especially those associated with local structure and thermodynamics. In the latter case, phase equilibria and the location of phase boundaries feature prominently. In this section, some of the recent advances in our understanding of simple liquids are covered. [Pg.2]


See other pages where Liquid phase molecular systems Monte Carlo simulation is mentioned: [Pg.579]    [Pg.47]    [Pg.162]    [Pg.161]    [Pg.648]    [Pg.649]    [Pg.21]    [Pg.268]    [Pg.456]    [Pg.563]    [Pg.61]    [Pg.667]    [Pg.55]    [Pg.277]    [Pg.1923]    [Pg.208]    [Pg.66]    [Pg.107]    [Pg.155]    [Pg.687]    [Pg.5]    [Pg.216]    [Pg.154]    [Pg.593]    [Pg.1717]    [Pg.238]    [Pg.314]    [Pg.120]    [Pg.99]    [Pg.997]    [Pg.220]    [Pg.56]    [Pg.366]    [Pg.90]    [Pg.340]    [Pg.54]    [Pg.95]    [Pg.340]    [Pg.85]   
See also in sourсe #XX -- [ Pg.163 ]




SEARCH



Carlo simulation

Liquid phase molecular systems

Liquids Monte Carlo simulations

Liquids, simulation

Molecular liquids

Molecular phase

Molecular simulation Monte Carlo

Molecular simulations

Molecular system simulations

Monte Carlo simulation

Monte Carlo simulations molecular systems

Monte simulations

Phase simulation

Systems simulation

© 2024 chempedia.info