Liquid adsorption chromatography at critical conditions

Further work is done by us to separate completely cyclic and linear siloxanes with methyl endgroups in technical silicone oils as well as branched compounds by liquid adsorption chromatography at critical conditions (LACCC), where the species are separated not by molecular mass but by functionality and then analyse the separated compounds in a second dimension by MALDI-MS. 

The first step in the characterization of polymers is to fractionate the unknown sample, and then to determine the stmctures of the separated fractions. Separation is best performed by modem liquid chromatographic methods. Depending on the kind of heterogeneity it is necessary to select the most suitable chromatographic method, i.e. either Size-Exclusion Chromatography (SEC) or Liquid Adsorption Chromatography (LAC). Furthermore, the meanwhile well-established Liquid Adsorption Chromatography at Critical Conditions (LACCC) is also used. A separation system that operates near critical conditions sometimes has to be applied. 

Falkenhagen J, Much H, Stauf W, Muller AHE. Characterization of block copolymers by liquid adsorption chromatography at critical conditions, 1. Diblock copolymers. Macromol 2000 33 3687-93. 

Trimpin S, Weidner SM, Falkenhagen J, McEwen CN. Fractionation and solvent-free MALDl-MS analysis of polymers using liquid adsorption chromatography at critical conditions in combination with a multisample on-target homogenization/transfer sample preparation method. Anal Chem 2007 79 7565-70. 

Poly(propylene oxide)s were analysed efficiently by coupled liquid chromatography and MALDI-TOF mass spectrometry. The techniques were coupled via a robotic interface where the matrix was coaxially added to the eluate and spotted dropwise onto the MALDl target. Size exclusion chromatography and liquid chromatography at critical conditions of adsorption coupled to MALDI-TOF... 

As has been discussed, both entropic and enthalpic interactions affect the chromatographic behavior of macromolecules. They are adjusted to the required type of separation by selecting suitable stationary and mobile phases. In a third mode of LC of polymers, liquid chromatography at critical conditions (LCCC) of adsorption, the adsorptive interactions are fully compensated by entropic interactions. TAS is equal to AH and therefore, AG becomes zero. is 1 irrespective of molar mass and consequently, homopolymer molecules of different molar masses coelute in one chromatographic peak. The energetic conditions to achieve this very specific mode of LC rely on a very sensitive equilibrium, which is determined by the type of stationary phase, the mobile-phase composition, and the tern-... 

The principle of the liquid chromatography under critical conditions (LC CC) was elucidated in Section 16.3.3. The mutual compensation of the exclusion—entropy and the interaction—enthalpy-based retention of macromolecules can be attained when applying in the controlled way the interactions that lead to either adsorption or enthalpic partition. The resulting methods are called LC at the critical adsorption point (LC CAP) or LC at the critical partition point (LC CPP), respectively. The term LC at the point of exclusion-adsorption transition (LC PEAT) was also proposed for the procedures employing compensation of exclusion and adsorption [161]. It is anticipated that also other kinds of enthalpic interactions, for example the ion interactions between column packing and macromolecules can be utilized for the exclusion-interaction compensation. 

The chromatographic separation of polymers by liquid chromatography under critical conditions (LCCC), also referred to as liquid chromatography (LC) at the critical point of adsorption, LC in the critical range or LC at the point of exclusion-adsorption transition, has attracted significant attention within polymer community. Russian scientists using TLC [1-3] and later LC [4,5] have been the first experimentally identify critical conditions. At the critical conditions polymers of a given kind are eluted independently from their molar mass (for example. Fig. 1 [6]). 

According to Gorbunov and Skvortsov [18], triblock copolymers of the ABA type may be analyzed by liquid chromatography at the critical point of adsorption similar to the analysis of diblock copolymers. The two possible cases for this type of investigation, i.e. (a) the analysis with respect to the inner block B using the critical conditions of the outer block A, and (b) the analysis of the outer block A using the critical conditions of the inner block B, will be discussed briefly. 

In tile technique of liquid chromatography at the critical condition (LCCC), macromolecules of different sizes are eluted at the same time (Figure 10.19). ° This peculiar elution behavior is achieved making use of columns in which the macromolecules are at the adsorption-elution transition, and Figure 10.19 reports the calibration curve for LCCC along with the curves for adsorption and size exclusion chromatography, respectively. ... 

Liquid chromatography at the critical condition (LCCC) is performed at the elution-adsorption transition. It can be used to separate macromolecules with different functionalities such as chains with different chain ends or to separate linear chains from cycles. LCCC was used [77] to separate cycles from linear chains in poly(bisphenol-A-carbonate) PC. Figure 45.20 contains the LCCC trace. The trace is bimodal, with two bands, Z1 and Z2. The MALDI spectrum of Z1 displayed a large number of peaks, ranging approximately from 2.0 to 10 kDa, due to PC chains terminated with n-butyl on one side or on both sides. The MALDI spectrum of Z2 was far less crowded. It is made of cycles and one can note the systematic absence of linear chains. This implies that the LCCC separation is perfect. 

---