Light 709 separation from silver

The light energy from the sun or the desk lamp separated the silver from the film of silver chloride. This left a dark coating of pure silver on those areas of the cards that were exposed to the light. The other areas were unaffected because the light could not pass through the opaque objects. The white film of... 

DISPOSAL AND STORAGE METHODS silver metal and soluble silver compounds may be disposed of in sealed containers in a secured, sanitary landfill, metallic silver may be routed to a metal salvage facility store in a cool, dry location maintain adequate ventilation keep in the dark, as most silver salts are light-sensitive separate from combustibles, such as acetylene, ammonia, hydrogen peroxide, and chlorine trifluoride. 

This acid is prepared by treating the corresponding tetrachloride or oxychloride with winter. It separates from water m silky needles, or from alcohol in quadratic plates, M.pt. 184° to 185° C." The acid barium salt crystallises in bushy needles, the acid silve salt in glistening plates, whilst the neutral silver salt is an amorphous powder, which readily darkens when exposed to the light. The dry acid, heated with the oxychloride in benzene solution, yields p-chlorophenylphosphin-oxide. 

When the preceding chloro-acid in aqueous solution is chlorinated for three hours, the tnchioro-acid is isolated in plates or needles, M.pt. 220° C. It sublimes above its melting-point and the crystals thus obtained separate from methyl alcohol as long, colourless needles, M.pt. 82° C. When decomposed, the trichloro-acid yields 2 4. 5-trichlorotoluene, which proves its composition. The silver salt is a white powder, somewhat affected by light. 

This ester separates from aqueous alcohol as small, white crystals, M.pt. 120° C., soluble in benzene or petroleum ether. It is converted into the acid by heating under reflux for several hours with concentrated alcoholic potassium hydroxide. The acid crystallises from alcohol as wlute, glistening needles, M.pt. 145° C., soluble in ether or benzene. The silver salt is a pure white crystalline pow der, becoming dark on exposure to light. 

Such phenomenon of increase of fluorescence in the presence of silver plasmons has been reported earlier however, the separation of absorption from emission prevents self-absorption when the fluorescent light travels along the way. It should be stated that the lifetimes of the fluorescent molecules in the presence of silver nanopartides decreased as a result of the increase in transition probabilities. In the case of DH-BP(OH)2 in polyvinyl butyral (PVB), lifetime of the DH-BP(0H)2 fluorescence in the PVB films appeared nearly the same in the absence and presence of silver nanopartides -rf= 3.55 0.02 ns and -rf=3.75 0.01 ns, respectively. This important observation indicates that the increased fluorescence efficiency does not result from increasing emission rate kf, but rather from increasing efficiency of excitation in the neighborhood of the Ag NPs. The interaction of the fluorophore molecule with the scattered light from silver surface plasmons in the neighborhood of the Ag NPs enhances the excitation of the fluorophore. This can be understood since absorption and... 

---