Lanthanum solubility

Bina Selenides. Most biaary selenides are formed by beating selenium ia the presence of the element, reduction of selenites or selenates with carbon or hydrogen, and double decomposition of heavy-metal salts ia aqueous solution or suspension with a soluble selenide salt, eg, Na2Se or (NH 2S [66455-76-3]. Atmospheric oxygen oxidizes the selenides more rapidly than the corresponding sulfides and more slowly than the teUurides. Selenides of the alkah, alkaline-earth metals, and lanthanum elements are water soluble and readily hydrolyzed. Heavy-metal selenides are iasoluble ia water. Polyselenides form when selenium reacts with alkah metals dissolved ia hquid ammonia. Metal (M) hydrogen selenides of the M HSe type are known. Some heavy-metal selenides show important and useful electric, photoelectric, photo-optical, and semiconductor properties. Ferroselenium and nickel selenide are made by sintering a mixture of selenium and metal powder. 

The step used ia California to crack or open the concentrate for further processiag is to roast ia air, whereby Ce " oxidi2es to Ce" ", then leach with HCl to produce an iasoluble cerium-rich portion, cerium concentrate [68909-12-6] and a soluble cerium-poor lanthanum-rich fraction. 

The pressed disc (or pellet) type of crystalline membrane electrode is illustrated by silver sulphide, in which substance silver ions can migrate. The pellet is sealed into the base of a plastic container as in the case of the lanthanum fluoride electrode, and contact is made by means of a silver wire with its lower end embedded in the pellet this wire establishes equilibrium with silver ions in the pellet and thus functions as an internal reference electrode. Placed in a solution containing silver ions the electrode acquires a potential which is dictated by the activity of the silver ions in the test solution. Placed in a solution containing sulphide ions, the electrode acquires a potential which is governed by the silver ion activity in the solution, and this is itself dictated by the activity of the sulphide ions in the test solution and the solubility product of silver sulphide — i.e. it is an electrode of the second kind (Section 15.1). 

Lanthanide sulfates solubility, 6, 922 Lanthanite structure, 6, 848 Lanthanum, hexanitrato-structure, 1, 101... 

The rare earth oxides of lanthanum, samarium and gadolinium were converted into soluble nitrate salts by dissolving them in the minimum amount of concentrated nitric acid. Then two sets were prepared by adding 2.0 ml of aqueous solution of La(N03)3.6H20 [0.2 M] and 0.01 ml of (n-BuO)4Ti to 25 ml of aqueous solution of Cu(N03)2 [1.0 M]. Similarly, two sets were prepared with Co(N03)3. Same procedures were followed for Sm(N03)3 [0.2 M] and Gd(N03)3 [0.2 M], One set of all these solutions were sonicated under ultrasonic bath (Model - Meltronics, 20 kHz, 250 W) for half an hour. The solutions prepared in normal and sonicated conditions were kept in muffle furnace (Model - Deluxe Zenith) first at 100°C for 2 h and then the temperature of the furnace was raised up to 900°C and calcined for 2 h. The solid composites prepared were then cooled to room temperature and treated as catalyst for phenol degradation. 

These incorporate membranes fabricated from insoluble crystalline materials. They can be in the form of a single crystal, a compressed disc of micro-crystalline material or an agglomerate of micro-crystals embedded in a silicone rubber or paraffin matrix which is moulded in the form of a thin disc. The materials used are highly insoluble salts such as lanthanum fluoride, barium sulphate, silver halides and metal sulphides. These types of membrane show a selective and Nemstian response to solutions containing either the cation or the anion of the salt used. Factors to be considered in the fabrication of a suitable membrane include solubility, mechanical strength, conductivity and resistance to abrasion or corrosion. 

Mn activity is especially high when there is deficiency at the A-site in perovskites. The diffusion of Mn into YSZ causes Mn depletion of the LSM and in the case of stoichiometric LSM chemically active La203 is formed, leading to the formation of La2Zr207 at the interface. This is supported by the observation of the formation of pyrochlore in 75%YSZ/25%LSM and not in 20%YSZ/80%LSM mixtures sintered at 1300°C for 2 h [166], Excess of Mn in LSM/YSZ could delay or impede the formation of La203 species at the interface. On the other hand, there is hardly detectable La in the YSZ, indicating very low solubility of lanthanum in YSZ. 

The temperature dependences of solubilities of the trichlorides of lanthanum, praseodymium, and neodymium in aqueous ammonium chloride solutions (212) are so irregular that no estimate of solution enthalpies can be made from them by the van t Hoff method. 

Solubility Products for Lanthanum Trifluoride and Cerium Trifluoride in Aqueous Solution at 25°C ... 

Variation op the Solubility Product for Lanthanum Fluoride with Sodium Perchlorate Concentration0... 

Cerium trifluoride is known to be insoluble in liquid ammonia (278). Lanthanum trifluoride is very sparingly soluble in bromine trifluoride ... 

Lanthanum and neodymium trichlorides are readily soluble in ethylene glycol and in glycerol [Table XXVI (228,288)]. 

After removing cerium (and thorium), the nitric acid solution of rare earths is treated with ammonium nitrate. Lanthanum forms the least soluble double salt with ammonium nitrate, which may be removed from tbe solution by repeated crystallization. Neodymium is recovered from this solution as the double magnesium nitrate by continued fractionation. 

The monazite sand is heated with sulfuric acid at about 120 to 170°C. An exothermic reaction ensues raising the temperature to above 200°C. Samarium and other rare earths are converted to their water-soluble sulfates. The residue is extracted with water and the solution is treated with sodium pyrophosphate to precipitate thorium. After removing thorium, the solution is treated with sodium sulfate to precipitate rare earths as their double sulfates, that is, rare earth sulfates-sodium sulfate. The double sulfates are heated with sodium hydroxide to convert them into rare earth hydroxides. The hydroxides are treated with hydrochloric or nitric acid to solubihze all rare earths except cerium. The insoluble cerium(IV) hydroxide is filtered. Lanthanum and other rare earths are then separated by fractional crystallization after converting them to double salts with ammonium or magnesium nitrate. The samarium—europium fraction is converted to acetates and reduced with sodium amalgam to low valence states. The reduced metals are extracted with dilute acid. As mentioned above, this fractional crystallization process is very tedious, time-consuming, and currently rare earths are separated by relatively easier methods based on ion exchange and solvent extraction. 

The fluoride ion selective electrode is the most popular means of fluoride ion determination after sample destruction by any method but it does have limitations. It can be used either directly to measure the fluoride potential6 or as an end-point detector in a potentiometric titration with a lanthanum(l II) reagent as titrant.4,7 Problems can be experienced with potential drift in direct potentiometry, especially at low fluoride ion concentrations. Titration methods often yield sluggish end points unless water miscible solvents are used to decrease solubilities and increase potentia 1 breaks and sulfate and phosphate can interfere. End-point determination can be facilitated by using a computerized Gran plotting procedure.4... 

The extremely low solubility of lead phosphate in water (about 6 x 10 15m) again suggests potentiometric analysis. Selig57,59 determined micro amounts of phosphate by precipitation with lead perchlorate in aqueous medium. The sample was buffered at pH 8.25-8.75 and a lead-selective electrode was used to establish the end-point. The detection limit is about 10 pg of phosphorus. Anions which form insoluble lead salts, such as molybdate, tungstate or chromate, interfere with the procedure. Similar direct potentiometric titrations of phosphate by precipitation as insoluble salts of lanthanum(III), copper(II) or cadmium(II) are suggested, the corresponding ion-selective electrodes being used to detect the end-point. 

---