Laminating polychloroprene rubber

Chem. Descrip. Triphenyl phosphate CAS 115-86-6 EINECS/ELINCS 204-112-2 Uses Rame retardant platinizing agent, plastidzer tor collodion cotton plastidzer w/o gelatinizing properties for acetyl cellulose reduces tiamm. ot NC and acetyl cellulose-based plastic compds. and lacquer films flame retardant plasticizer tor photographic film materials, surf, coatings, phenolic laminates, cellulose acetate film/compds., rubber articles made from acrylonitrile-butadiene, polychloroprene rubber Features Not compat. with PVC... 

Elastomers Solutions of NR have been used for laminating textiles for over a century. The Macintosh raincoat, invented in 1825, consisted of two sheets of cotton adhered by an inner layer of natural rubber. SBR is used as an adhesive in carpet backing and packaging. Neoprene (polychloroprene) may be blended with a terpene or phenolic resin and used as a contact adhesive for shoes and furniture. 

These are typically built on a polyester base membrane (PETP, 35 pm, copper-laminated) with a polyester spacer membrane, safety chamber and front membrane. The snap disc being gold plated stainless steel. Other designs use electrical contacts made from silver, silver on carbon or carbon only. Keypads may also be made from conductive silicone rubber. Conventional computer keyboards made from ABS, polyester or other polymers, may be covered by a polymer overlay to protect it against dirt, dust, water or other substance present in a hostile environment. Polyester and PVC overlays are used in a wide variety of applications with computer and instrumentation equipment in dental and medical healthcare and other areas. Typical casing materials include PC and polychloroprene. 

After the release agent/coagulant dip is applied, Ae formers are preferably conveyed to the next station in the production line where the laminate layer is applied to the formers. The laminate layer may be comprised of an elastomeric or liquid resin dip, such as natural rubber latex. Alternatively, the laminate layer may be a natural or synthetic rubber, such as S5mthetic latex, polyiuethane, nitrile or polychloroprene. By varying the content of the latex material, the laminate layer may be varied to provide different degrees of strength, comfort, and flexibility. In any event, the content of the latex applied to the former will preferably be adjusted to provide the desired gripability, protection from cuts and abrasions, and liquid repellency. ... 

---