Kinetics styrene

The results can be interpreted in terms of Langmuir-Hinshelwood-Hougen-Watson kinetics. Styrene adsorbs more strongly than octenes and, as a consequence, only after styrene has been converted does the formation of octanes proceed at a high rate. The... 

Keywords autopolymerization kinetics styrene - maleic anhydride copoiymerization... 

Kinetics styrene emulsion polymerization, varying emulsifier and initiator 428-431 concentration (sodium dodecyl sulfate and potassium peroxodisulfate)... 

Figure 6.3 Log-log plots of Rp versus concentration which verify the order of the kinetics with respect to the constituent varied, (a) Monomer (methyl methacrylate) concentration varied at constant initiator concentration. [Data from T. Sugimura and Y. Minoura, J. Polym. Sci. A-l 2735 (1966).] (b) Initiator concentration varied AIBN in methy methacrylate (o), benzoyl peroxide in styrene ( ), and benzoyl peroxide in methyl methacrylate ( ). (From P. J. Flory, Principles of Polymer Chemistry, copyright 1953 by Cornell University, used with permission.)...

Thermal Oxidative Stability. ABS undergoes autoxidation and the kinetic features of the oxygen consumption reaction are consistent with an autocatalytic free-radical chain mechanism. Comparisons of the rate of oxidation of ABS with that of polybutadiene and styrene—acrylonitrile copolymer indicate that the polybutadiene component is significantly more sensitive to oxidation than the thermoplastic component (31—33). Oxidation of polybutadiene under these conditions results in embrittlement of the mbber because of cross-linking such embrittlement of the elastomer in ABS results in the loss of impact resistance. Studies have also indicated that oxidation causes detachment of the grafted styrene—acrylonitrile copolymer from the elastomer which contributes to impact deterioration (34). 

The kinetics of initiation reactions of alkyllithium compounds often exhibit fractional kinetic order dependence on the total concentration of initiator as shown in Table 2. For example, the kinetics of the initiation reaction of //-butyUithium with styrene monomer in benzene exhibit a first-order dependence on styrene concentration and a one-sixth order dependence on //-butyUithium concentration as shown in equation 13, where is the rate constant for... 

When using a cation source in conjunction with a Friedel-Crafts acid the concentration of growing centers is most often difficult to measure and remains unknown. By the use of stable carbocation salts (for instance trityl and tropyhum hexachloroantimonate) the uncertainty of the concentration of initiating cations is eliminated. Due to the highly reproducible rates, stable carbocation salts have been used in kinetic studies. Their use, however, is limited to cationicaHy fairly reactive monomers (eg, A/-vinylcarbazole, -methoxystyrene, alkyl vinyl ethers) since they are too stable and therefore ineffective initiators of less reactive monomers, such as isobutylene, styrene, and dienes. 

In studies of the polymerization kinetics of triaUyl citrate [6299-73-6] the cyclization constant was found to be intermediate between that of diaUyl succinate and DAP (86). Copolymerization reactivity ratios with vinyl monomers have been reported (87). At 60°C with benzoyl peroxide as initiator, triaUyl citrate retards polymerization of styrene, acrylonitrile, vinyl choloride, and vinyl acetate. Properties of polyfunctional aUyl esters are given in Table 7 some of these esters have sharp odors and cause skin irritation. 

Divinylbenzene copolymers with styrene are produced extensively as supports for the active sites of ion-exchange resins and in biochemical synthesis. About 1—10 wt % divinylbenzene is used, depending on the required rigidity of the cross-linked gel, and the polymerization is carried out as a suspension of the monomer-phase droplets in water, usually as a batch process. Several studies have been reported on the reaction kinetics (200,201). 

Mechanisms. Because of its considerable industrial importance as well as its intrinsic interest, emulsion polymerization of vinyl acetate in the presence of surfactants has been extensively studied (75—77). The Smith-Ewart theory, which describes emulsion polymerization of monomers such as styrene, does not apply to vinyl acetate. Reasons for this are the substantial water solubiUty of vinyl acetate monomer, and the different reactivities of the vinyl acetate and styrene radicals the chain transfer to monomer is much higher for vinyl acetate. The kinetics of the polymerization of vinyl acetate has been studied and mechanisms have been proposed (78—82). 

Dente and Ranzi (in Albright et al., eds.. Pyrolysis Theory and Industrial Practice, Academic Press, 1983, pp. 133-175) Mathematical modehng of hydrocarbon pyrolysis reactions Shah and Sharma (in Carberry and Varma, eds.. Chemical Reaction and Reaction Engineering Handbook, Dekker, 1987, pp. 713-721) Hydroxylamine phosphate manufacture in a slurry reactor Some aspects of a kinetic model of methanol synthesis are described in the first example, which is followed by a second example that describes coping with the multiphcity of reactants and reactions of some petroleum conversion processes. Then two somewhat simph-fied industrial examples are worked out in detail mild thermal cracking and production of styrene. Even these calculations are impractical without a computer. The basic data and mathematics and some of the results are presented. 

Kinetic studies of the addition of hydrogen chloride to styrene support the conclusion that an ion-pair mechanism operates because aromatic conjugation is involved. The reaction is first-order in hydrogen chloride, indicating that only one molecule of hydrogen chloride participates in the rate-determining step. ... 

Thermodynamics and kinetics need not go hand in hand. Consider all possible products resulting from addition of one equivalent of bromine to phenylacetylene (phenylacetylene+Br2) and to styrene (styrene+Br2). Calculate the heat of reaction for each addition. (The energy of Br2 is given at right.) Is addition to the alkyne or to the alkene more favorable ... 

Lu et al. [86] also studied the effect of initiator concentration on the dispersion polymerization of styrene in ethanol medium by using ACPA as the initiator. They observed that there was a period at the extended monomer conversion in which the polymerization rate was independent of the initiator concentration, although it was dependent on the initiator concentration at the initial stage of polymerization. We also had a similar observation, which was obtained by changing the AIBN concentration in the dispersion polymerization of styrene conducted in isopropanol-water medium. Lu et al. [86] proposed that the polymerization rate beyond 50% conversion could be explained by the usual heterogenous polymer kinetics described by the following equation ... 

Studies in the photoinitiation of polymerization by transition metal chelates probably stem from the original observations of Bamford and Ferrar [33]. These workers have shown that Mn(III) tris-(acety]acetonate) (Mn(a-cac)3) and Mn (III) tris-(l,l,l-trifluoroacetyl acetonate) (Mn(facac)3) can photosensitize the free radical polymerization of MMA and styrene (in bulk and in solution) when irradiated with light of A = 365 at 25°C and also abstract hydrogen atom from hydrocarbon solvents in the absence of monomer. The initiation of polymerization is not dependant on the nature of the monomer and the rate of photodecomposition of Mn(acac)3 exceeds the rate of initiation and the initiation species is the acac radical. The mechanism shown in Scheme (14) is proposed according to the kinetics and spectral observations ... 

Recently, Aiiwi and Abdullah [42] have investigated the photoinitiation of styrene by oxo-tris(dimethyl dithi-ocarbomato) vanadium (V) (VO(S2CN(CH3)2)3 using light of A = 365 nm. Spectroscopic and kinetic analyses... 

Polymers in Schemes 12 and 13 were the first examples of the preparation of pyridinium and iminopyridinium ylide polymers. One of the more recent contributions of Kondo and his colleagues [16] deals with the sensitization effect of l-ethoxycarbonyliminopyridinium ylide (IPYY) (Scheme 14) on the photopolymerization of vinyl monomers. Only acrylic monomers such as MMA and methyl acrylate (MA) were photoinitiated by IPYY, while vinylacetate (VA), acrylonitrile (AN), and styrene were unaffected by the initiator used. A free radical mechanism was confirmed by a kinetic study. The complex of IPYY and MMA was defined as an exciplex that served as a precursor of the initiating radical. This ylide is unique in being stabilized by the participation of a... 

It was recently found that j3-PCPY can also be used as a radical initiator to obtain an alternate copolymer of MMA with styrene [35], which was only possible in the presence of Lewis acids [36,37] in the past. The kinetics of the system has been formulated as Rp a[/3-PCPY] a[MMA] (l/a[Styrene] The values of kp /k, and AE were evaluated as 1.43 x 10 L mol -s and 87 kJ/ mol, respectively, for the system. NMR spectroscopy was used to determine the structure composition and stereochemistry of copolymers. Radical copolymerization of AN with styrene [38] by using /3-PCPY as the initiator at 55-65°C also resulted in an alternate copolymer. Rp is a direct function of /3-PCPY and AN, and is inversely related to styrene. 

An alternating copolymer of a-methyl styrene and oxygen as an active polymer was recently reported [20]. When a-methyl styrene and AIBN are pressurized with O2, poly-a-methylstyreneperoxide is obtained. Polymerization kinetic studies have shown that the oligoperoxides mentioned above were as reactive as benzoyl peroxide, which is a commercial peroxidic initiator. Table 1 compares the overall rate constants of some oligoperoxides with that of benzoyl peroxide. 

Similar anomalies have been encountered by several workers in the bulk and solution polymerization of this monomer induced by classical free-radical initiators84-86) also, particularly low rates of conversion were observed. The most thorough kinetic study was carried out by Aso and Tanaka86) who again found normal results and a value of k jkt much lower than that for styrene. Copolymerization studies of 2-vinylfuran (Mj) have given the following values of the reactivity ratios ... 

There have been numerous studies on the kinetics of decomposition of A IRK. AIBMe and other dialkyldiazenes.46 Solvent effects on are small by conventional standards but, nonetheless, significant. Data for AIBMe is presented in Table 3.3. The data come from a variety of sources and can be seen to increase in the series where the solvent is aliphatic < ester (including MMA) < aromatic (including styrene) < alcohol. There is a factor of two difference between kA in methanol and k< in ethyl acetate. The value of kA for AIBN is also reported to be higher in aromatic than in hydrocarbon solvents and to increase with the dielectric constant of the medium.31 79 80 Tlic kA of AIBMe and AIBN show no direct correlation with solvent viscosity (see also 3.3.1.1.3), which is consistent with the reaction being irreversible (Le. no cage return). 

Experimentally, the stretching of block copolymer chains has been addressed in two ways by measuring L as a function of N, and by measuring the components of Rg of the block chains both parallel and perpendicular to the interface. The domain dimensions have been studied most extensively for styrene-isoprene and styrene-butadiene block copolymers X-ray and neutron scattering are the methods of choice. The predicted SSL scaling of L N2/3 has been reported for spheres, cylinders and lamellae [99,102-106], but not in all cases. For example, Bates et al. found N0 37 for styrene-butadiene spheres [100], and Hadziioannou and Skoulios observed N0 79 for styrene-isoprene lamellae [107], In the sphere case, kinetic limitations to equilibration were felt to be an important factor [100],... 

Kochi (1956a, 1956b) and Dickerman et al. (1958, 1959) studied the kinetics of the Meerwein reaction of arenediazonium salts with acrylonitrile, styrene, and other alkenes, based on initial studies on the Sandmeyer reaction. The reactions were found to be first-order in diazonium ion and in cuprous ion. The relative rates of the addition to four alkenes (acrylonitrile, styrene, methyl acrylate, and methyl methacrylate) vary by a factor of only 1.55 (Dickerman et al., 1959). This result indicates that the aryl radical has a low selectivity. The kinetic data are consistent with the mechanism of Schemes 10-52 to 10-56, 10-58 and 10-59. This mechanism was strongly corroborated by Galli s work on the Sandmeyer reaction more than twenty years later (1981-89). 

---